Ecotoxicity evaluation of Cu- and Fe-CNT complexes based on the activity of bacterial bioluminescence and seed germination

The toxic effects of the composites of Fe~0 and Cu~0 with different percentages of CNTs were examined based on the activity of bacterial bioluminescence and seed germination. In terms of the EC_50 values, the toxic effects of Cu~0 on bacterial bioluminescence and seed germination were approximately 2 and 180 times greater than that of Fe~0, respectively. The toxicity increased with increasing CNT content in the Cu-CNT mixtures for both organisms,whereas opposite results were observed with Fe-CNT mixtures. The mean toxic effects of Cu-CNT(6%) were approximately 1.3–1.4 times greater than that of Cu-CNT(0%), whereas the toxic effects of Fe-CNT(6%) were approximately 2.1–2.5 times lower than that of Fe-CNT(0%) for both the bioluminescence activity and seed germination. The causes of this phenomenon are unclear at this point. More research will be needed to elucidate the mechanism of the toxicity of nano-mixture materials and the causes of the different patterns of toxicity with Cu-and Fe-CNT mixtures.     

STREAM DISCHARGE PREDICTION VIA A GRID BASED SOIL WATER ROUTING WITH PADDY FIELDS1

ABSTRACT: A grid based daily hydrologic model for a watershed with paddy fields was developed to predict the stream discharge. ASCII formatted elevation, soil, and land use data supported by the GRASS Geographic Information System are used to generate distributed results such as surface runoff and subsurface flow, soil water content, and evapotranspiration. The model uses a single flow path algorithm and simulates a water balance at each grid element. A linear reservoir assumption was used to predict subsurface runoff components. The model was applied to a 75.6 km² watershed located in the middle of South Korea, and observed stream flow hydrographs from 1995 and 1996 were compared to model predictions. The stream flow predictions of 1995 and 1996 generally agreed with the observed flow, resulting in a Nash‐Sutcliffe efficiency R² of 0.60 and 0.62, respectively. The hydraulic conductivity for percolating water through the saturated layer affected baseflow generation. The levee height of the paddy influenced the time and magnitude of the surface runoff, depending on irrigation management. The model will be used for making low flow management decisions by evaluating the role of each land use to stream flow, especially in case of paddy decrease by gradual urbanization of a watershed.     

A comparative study of US EPA 1996 and 1999 emission inventories in the west Gulf of Mexico coast region, USA

Emission inventory is one of the required inputs to air quality models. To assist in the urban and regional modeling efforts, United States Environmental Protection Agency (EPA) has compiled a National Emission Inventory (NEI) for criterion pollutants, and the precursors of ozone and particulate matter (PM). In December 2002, EPA released the 1999 NEI estimates (NEI99), which represent the most recent national emission data. However, the data sets are not in model-ready format for air quality simulations. This present work converts the NEI99 Final Version 2 data sets into Inventory Data Analyzer (IDA) format and processes the data using the Sparse Matrix Operator Kernel Emissions (SMOKE) modeling system to generate a gridded emission inventory in a domain covering the west Gulf Coast Region, USA. The spatial and diurnal emission characteristics of the gridded emission inventories are then assessed and compared with those of the National Emission Trend 1996 (NET96). The NEI99 database contains more complete emission records in both area and point sources. It is also found that NEI99 data exhibit greater emissions with respect to point and mobile sources but smaller emissions with respect to area sources when compared to the corresponding gridded NET96 data in the same study domain. The most distinct differences between the NEI99 and NET96 databases are CO emission of mobile sources, SO2 emissions of point sources, and VOC/PM/NH3/NOx emissions of area and non-road sources. The gridded NEI99 data show low VOC/NOx ratios (<2-5) in the urban areas of the study domain.     

Risk assessment of particulate matter by considering time-activity-pattern and major microenvironments for preschool children living in Seoul,South Korea

Environmental Science and Pollution Research - Preschool children aged 3–6 years are vulnerable to exposed to particulate matter (“PM10” and “PM2.5”). It is required...     

西安市重污染与清洁天PM2.5组分及其活性氧物质对比

针对重霾污染,在西安市冬季重污染日(2015-11-30~2015-12-09)和清洁日(2016-01-13~2016-01-22)各进行了为期10d的PM_(2.5)采集,测量其中的有机碳、元素碳,及NH_4~+、NO_3~-、SO_4~(2-)等无机水溶性离子,探讨两种污染条件下的组分特征及其成因.结果表明:观测期,重霾日和清洁日PM_(2.5)质量浓度分别为(170±47.5)μg·m~(-3)和(48.6±17.9)μg·m~(-3),且重霾日伴随低能见度、高湿静风等多种不利气象条件;重霾日二次无机离子(NH_4~+、NO_3~-、SO_4~(2-))组分占PM_(2.5)质量浓度的49.8%±13.1%,而清洁日为19.4%±5.95%,并且重霾日硫氧化速率(sulfur oxidation ratio,SOR)和氮氧化速率(nitrogen oxidation ratio,NOR)分别为0.282±0.157和0.269±0.124,远高于清洁日(SOR和NOR分别为0.189±0.057和0.077±0.046),重霾日二次有机组分浓度[(6.22±3.87)μg·m~(-3)]是清洁日[(1.44±1.63)μg·m~(-3)]的5倍,表明二次污染及不利气象条件是造成重霾期间相关组分浓度升高的重要原因.最后,通过二氯荧光黄双乙酸盐(2',7'-DCFH)化学荧光分析法测定了其中活性氧物质(reactive oxygen species,ROS)的浓度,探讨其对于二次无机组分形成的影响,结果表明观测期ROS平均浓度(以H_2O_2计)分别为(4.99±1.54)nmol·m~(-3)(重霾期),(0.492±0.356)nmol·m~(-3)(清洁期),二次反应及积累效应可能是西安重霾条件下ROS浓度升高的主要原因.NO_3~-、SO_4~(2-)与ROS均呈现正相关(P0.05),表明ROS可能通过二次氧化过程参与到二次无机组分形成过程中.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

The passion bug: How and when do leaders inspire work passion?

Drawing from signaling theory, we propose a work passion transfer model where leaders' passion is transmitted to employees through the former's leadership style and is contingent on employees' perceived importance of performance to self-esteem (IPSE). Data from 201 supervisor–employee dyads from the health-care industry show that leaders' harmonious passion led to employees' harmonious passion through charismatic leadership, whereas contingent reward leadership accounted for the transfer of obsessive passion; IPSE did not play a moderating role for either form of passion. Results from a supplementary study further reveal that the link between leadership and employee passion operated through employees' perception of leader passion and that employees' IPSE accentuated for the relationship between perceived leader obsessive passion and employees' obsessive passion. This study advances research in work passion, leadership, and signaling theory and provides important implications for managerial practice.     

Photochemical Smog Modelling Using the Air Pollution Chemical Transport Model (TAPM-CTM) in Ho Chi Minh City,Vietnam

Environmental Modeling & Assessment - This paper describes the application of the air pollution model (TAPM-CTM) for photochemical airshed modelling in the Ho Chi Minh region. The model was...