First REP-LECOTOX Workshop—ecotoxicogenomics: the challenge of integrating genomics/proteomics/metabolomics into aquatic and terrestrial ecotoxicology

Environmental Science and Pollution Research -     

Application of vibration in the laser powder deposition process

Laser powder deposition (LPD) has been used for a few decades as a technique that is unique in the application of complex geometry part manufacturing, high-value parts repairing, and surface modification. However, improving the buildup quality of LPD process is still a challenge because of the presence of defects. In this paper, the effect of in-process vibration frequency on the buildup properties of LPD is studied. Experimental results show that the vibratory energy has a significant effect on reducing porosity. Up to an 80% reduction in the porosity and the maximum defect size can be obtained by choosing the appropriate vibration parameters. In addition, a more homogeneous microstructure is achieved that results in less deviation in hardness throughout the buildup.     

Occupational noise in printing companies

The extent of noise in five printing companies in Novi Sad, Serbia, was determined using TES-1358A Sound Analyzer with RS-232 Interface. The data on equivalent A-level (dBA), as well as, maximum and minimum sound pressure levels were collected. It was found that folders and offset printing units are the predominant noise sources, with the average L (eq) levels of 87.66 and 82.7 dBA, respectively. Forty percent of the machines produced noise levels above the limiting threshold level of 85 dBA, allowed by law. The noise in all printing companies was dominated by higher frequency noise, and the maximum level mostly appeared at 4,000 Hz. For offset printing machines and folders, the means of L (eq) levels exceeded the permissible levels given by NR-80 curve at higher frequencies. There are no published studies of occupational noise and hearing impairment of workers exposed to hazardous noise in printing industry in Serbia. More extensive studies are needed to determine the exact impact of noise on the workers. Technical and organizational measures in order to control noise and prevent noise exposure, and general hearing conservation program to protect workers, should be introduced in printing industry.     

Hydrographic and biological aspects of algal bloom in the Adriatic Sea in 1988

The interaction of hydrological, chemical and biological factors in a defined time may cause an excess bloom of phytoplankton in an ecosystem, which can persist over a long period or occur from time to time.

This phenomenon has been recorded from the northern Adriatic and coastal enclosed basins along the eastern Adriatic coast (Ka?tela Bay, Split) for a long time now.

During 1988 this phenomenon of increased production was recorded from almost the entire northern and middle Adriatic with some traces even in its southern part. Some preliminary results for that period point to the fact that this was caused very likely by exceptionally warm and dry weather, with no significant precipitations and wind. Such conditions affect horizontal and vertical stratification of water masses.

High photosynthetic radiation, increased quantities of alochthonous organic matter, either in the form of particulate or dissolved organic matter, either in the form of particulate or dissolved organic carbon (POC or DOC), influx of nutrients (via rivers, municipal sewage or upwelling) are the main causes of sudden bloom and rapid reproduction rate of phytoplankton species (Diatoms) to the large quantities to which the pollution of the entire coastal area is due.     

Influence of the incorporation of high-and low-density polyethylene granules in mortar matrices on the characteristics of solidified radioactive waste

Granules of high density polyethylene (PEHD) and low density polyethylene (PELD) were used in preparation of the mortar matrices in the immobilization process of radioactive waste materials containing ¹³⁷Cs. The diameter of granulate forms varied from 0.2 to 2.0 mm. Four types of PEHD and PELD, forming four types of matrix materials, were used instead of ordinarily used stone granules of 2 mm average diameter, to decrease the porosity and density of the mortar matrix and avoid the segregation of stone particles on the bottom of the immobilized radioactive waste cylindric form. The physico-chemical characteristics of the radioactive waste mortar mixture form were improved, especially the radionuclide leach-rate. It decreased from 4% for the material prepared with stone granules to 2.5% to 3% for the materials prepared with PEHD and PELD. Mechanical strengths of the mortar-radioactive waste mixture samples prepared with PELD and PEHD were notably higher, 14 to 18 MPa, than the monoliths prepared with the ordinary stone granules, 11 MPa. Using PEHD and PELD as granules in the radioactive waste mortar mixture, the weight of the final, full-sized immobilized monolith was up to 25% lower than material with stone granules.     

Characterization of dioxin-like contamination in soil and sediments from the ��hot spot�� area of petrochemical plant in Pancevo (Serbia)

Purpose

Combinatorial bio/chemical approach was applied to investigate dioxin-like contamination of soil and sediment at the petrochemical and organochlorine plant in Pancevo, Serbia, after the destruction of manufacturing facilities that occurred in the spring of 1999 and subsequent remediation actions.

Materials and methods

Soil samples were analyzed for indicator polychlorinated biphenyls (PCBs) by gas chromatography/electron capture detection (GC/ECD). Prioritized soil sample and sediment samples from the waste water channel were analyzed for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) by high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). Microethoxyresorufin o-deethylase (Micro-EROD) and H4IIE?Cluciferase bioassays were used for monitoring of dioxin-like compounds (DLC) and for better characterization of dioxin-like activity of soil samples.

Results

Bioanalytical results indicated high dioxin-like activity in one localized soil sample, while the chemical analysis confirmed the presence of large quantities of DLC: 3.0?×?10⁵ ng/g d.w. of seven-key PCBs, 8.2 ng/g d.w. of PCDD/Fs, and 3.0?×?10⁵ ng/g d.w. of planar and mono-ortho PCBs. In the sediment, contaminant concentrations were in the range 2?C8 ng/g d.w. of PCDD/Fs and 9?C20 ng/g d.w. of PCBs.

Conclusions

This study demonstrates the utility of combined application of bioassays and instrumental analysis, especially for developing and transition country which do not have capacity of the expensive instrumental analysis. The results indicate the high contamination of soil in the area of petrochemical plant, and PCDD/Fs contamination of the sediment from the waste water channel originating from the ethylene dichloride production.     

The ecosystem of the bay of Mali Ston natural and anthropogenic influence

Chemical hydrography, nutrients and trace metals in water, sediments and marine organisms were studied in the Bay of Mali Ston and their role in terms of pollution discussed. Results show that the entire study area is very strongly affected by the adjacent land. The overall area is well aerated so that no dangerous accumulation of nutrients with oxygen content reduction was recorded.

Results of analyses of trace metals show that the water and sediments of the bay contain high levels of some metals significantly higher than those from the open sea. This may be attributed to the natural sedimentation processes and the Neretva River and submarine spring runoffs carrying constituents of ignous and limestone rocks.