Evaluation of different granulated active carbons for removal of Microcystin-LR from contaminated water

Most frequently encountered freshwater cyanobacterial toxin is Microcystin-LR (MC-LR). Microcystins released from cells into water have been responsible for the death of humans, domestic and wild animals. Removal of microcystin by active carbon has been one of the best methods available so far. This study evaluates three grades of active carbon namely 40, 60 and 80 CTC for their removal efficiency of MC-LR from contaminated water. Kinetics of toxin removal was studied in time course experiments. Protection in mouse model was studied for the samples after the adsorption. Toxin quantitation was done by HPLC method. The MC-LR concentration after 24 hr treatment with 40, 60 and 80 CTC carbons were 4.8, 3.3 and 1.3 microg/ml respectively from an initial concentration of 5.2 microg/ml. Protection in mouse bioassay was seen after 48, 24 and 2 hr of adsorption time respectively for 40, 60 and 80 CTC carbons. 80 CTC carbon was found to be most efficient in removing MC-LR from contaminated water.     

Determination of Cd,Cr, Cu,Pb and Zn from various water samples with use of FAAS techniques after the solid phase extraction on rice bran

A facile and novel method has been developed for the determination of cadmium, chromium, copper, lead, and zinc from various water samples using FAAS. In the present investigation, a syringe was loaded with sorbent (rice bran) for the separation and enrichment of cadmium, chromium, copper, lead, and zinc, prior to their analysis by flame atomic absorption spectrometry which was described to substitute the batch and column techniques. The syringe was loaded with 2.0 g of sorbent in order to retain the analyte elements. Six milliliter of sample solution (pH 8.0 ± 0.2) was drawn into the syringe in 15 s and discharged over a period of 15 s. Then, 2.0 M HCl eluent was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cd, Cr, Cu, Pb, and Zn was in the range of 95.5–99.4% with SD of 0.10%. The elements could be concentrated by drawing and discharging several portions of sample successively. The detailed study of various interferences made the confirmation of the method highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied for the determination of Cd, Cr, Cu, Pb, and Zn in spiked and natural water samples. The results obtained are in good agreement with the reported methods at the 95% confidence level.     

Facile and Sensitive Spectrophotometric Determination of Synthetic Pyrithroids in Their Formulations, Water and Grain Samples

A novel reagent was introduced for the facile and sensitive spectrophotometric determination of syntheitic pyrethroids in their formulations (fenvalerate, cypermethrin and decamethrin), water and grain samples. These methods were based on the hydrolysis of synthetic pyrethroids under the alkaline conditions to form respective aldehyde groups. These groups were condensation with 3-methyl-2-benzothiazolinone hydrochloride (MBTH) to yield color derivatives having λ_max at 520 nm for fenvalerate, 516 nm for cypermethrin and 512 nm for decamethrin. The proposed method could be successfully applied for the determination of synthetic pyrethroids in their formulations, water and grain samples.     

Quantitative monitoring of dermal and inhalation exposure to 1,6-hexamethylene diisocyanate monomer and oligomers

Respiratory sensitization and occupational asthma are associated with exposure to 1,6-hexamethylene diisocyanate (HDI) in both monomeric and oligomeric forms. The monomer and polymers of diisocyanates differ significantly in their rates of absorption into tissue and their toxicity, and hence may differ in their contribution to sensitization. We have developed and evaluated a liquid chromatography/mass spectrometry (LC-MS) method capable of quantifying HDI and its oligomers (uretidone, biuret, and isocyanurate) in air, tape-stripped skin, and paint samples collected in the automotive refinishing industry. To generate analytical standards, urea derivatives of HDI, biuret, and isocyanurate were synthesized by reaction with 1-(2-methoxyphenyl)piperazine and purified. The urea derivatives were shown to degrade on average by less than 2% per week at -20 degrees C over a 2 month period in occupational samples. The average recovery of HDI and its oligomers from tape was 100% and the limits of detection were 2 and 8 fmol microl(-1), respectively. Exposure assessments were performed on 13 automotive spray painters to evaluate the LC-MS method and the sampling methods under field conditions. Isocyanurate was the most abundant component measured in paint tasks, with median air and skin concentrations of 2.4 mg m(-3) and 4.6 microg mm(-3), respectively. Log-transformed concentrations of HDI (r = 0.79, p < 0.0001) and of isocyanurate (r = 0.71, p < 0.0001) in the skin of workers were correlated with the log-transformed product of air concentration and painting time. The other polyisocyanates were detected on skin for less than 25% of the paint tasks. This LC-MS method provides a valuable tool to investigate inhalation and dermal exposures to specific polyisocyanates and to explore relative differences in the exposure pathways.     

Mesozooplankton distribution near an active volcanic island in the Andaman Sea (Barren Island)

The study addresses the distribution and diversity of mesozooplankton near the active volcano-Barren Island (Andaman Sea) in the context of persistent volcanic signature and warm air pool existing for the last few months. Sampling was done from the stations along the west and east side of the volcano up to a depth of 1,000 m during the inter monsoon (April) of 2006. Existence of feeble warm air pool was noticed around the Island (Atm. Temp. 29°C). Sea surface temperature recorded as 29.9°C on the west and 29.6°C on the east side stations. High mesozooplankton biomass was observed in the study area than the earlier reports. High density and biomass observed in the surface layer decreased significantly to the deeper depths. Lack of correlation was observed between mesozooplankton biomass and density with chl. a. Twenty-three mesozooplankton taxa were observed with copepoda as the dominant taxa followed by chaetognatha. The relative abundance of chaetognatha considerably affected the copepod population density in the surface layer. A noticeable feature was the presence of cumaceans, a hyperbenthic fauna in the surface, mixed layer and thermocline layer on the western side station where the volcano discharges in to the sea. The dominant order of copepoda, the calanoida was represented by 52 species belonging to 17 families. The order poecilostomatoida also had a significant contribution. Copepods exhibited a clear difference in their distribution pattern in different depth layers. The families Calanidae and Pontellidae showed a clear dominance in the surface whereas small-sized copepods belonging to the families Clausocalanidae and Paracalanidae were observed as the predominant community in the mixed layer and thermocline layer depth. Families Metridinidae, Augaptilidae and Aetideidae were observed as dominant in deeper layers.     

Environment friendly alternatives to halogenated refrigerants—A review

In developing country like India, most of the vapor compression based refrigeration, air conditioning and heat pump systems continue to run on halogenated refrigerants due to its excellent thermodynamic and thermo-physical properties apart from the low cost. However, the halogenated refrigerants have adverse environmental impacts such as ozone depletion potential (ODP) and global warming potential (GWP). Hence, it is necessary to look for alternative refrigerants to full fill the objectives of the international protocols (Montreal and Kyoto) and to satisfy the growing worldwide demand. This paper reviews the various experimental and theoretical studies carried out around the globe with environment friendly alternatives such as hydrocarbons (HC), hydroflurocarbons (HFC) and their mixtures, which are going to be the promising long-term alternatives. In addition, the technical difficulties of mixed refrigerants and future challenges of the alternatives are discussed. The problems pertaining to the usage of environment friendly refrigerants are also analyzed.     

Toxins and bioactive compounds from cyanobacteria and their implications on human health

Many species of cyanobacteria (blue-green algae) produce secondary metabolites with potent biotoxic or cytotoxic properties. These metabolites differ from the intermediates and cofactor compounds that are essential for cell structural synthesis and energy transduction. The mass growth of cyanobacteria which develop in fresh, brackish and, marine waters commonly contain potent toxins. Cyanobacterial toxins or cyanotoxins are responsible for or implicated in animal poisoning, human gastroenteritis, dermal contact irritations and primary liver cancer in humans. These toxins (microcystins, nodularins, saxitoxins, anatoxin-a, anatoxin-a(s), cylindrospermopsin) are structurally diverse and their effects range from liver damage, including liver cancer to neurotoxicity. Several incidents of human illness and more recently, the death of 60 haemodialysis patients in Caruaru, Brazil, have been linked to the presence of microcystins in water. In response to the growing concern about the non-lethal acute and chronic effects of microcystins, World Health Organization has recently set a new provisional guideline value for microcystin-LR of 1.0 microg/L in drinking water. Cyanobacteria including microcystin-producing strains produce a large number of peptide compounds, e.g. micropeptins, cyanopeptolins, microviridin, circinamide, aeruginosin, with varying bioactivities and potential pharmacological application. This article discusses briefly cyanobacterial toxins and their implications on human health.     

Development of simple and sensitive spectrophotometric method for the determination of bendiocarb in its formulations and environmental samples

Facile, selective and sensitive spectrophotometric method has been developed for the determination of bendiocarb in its insecticidal formulations, fortified water, food grains, agriculture wastewater and agriculture soil samples with prepared reagents. The method was based on alkaline hydrolysis of the bendiocarb pesticide, and the resultant hydrolysis product of bendiocarb was coupled with 2,6-dibromo-4-methylaniline to give a yellow color product with λmaxof457 nmorcouplingwith2, 6−dibromo−4−nitroanilinetoproducearedcoloredproductwithλ_max of474~nmorcouplingwith2, 4, 6−tribromoanilinetoformorangeredcoloredproducthasaλ_max of465 nm.Underoptimalconditions, Beer'slawrangefor2, 6−dibromo−4−methylaniline(DBMA)wasfoundtobe0.6−−14.0~μgmL ^-1, 0.8−−10.0 μgmL ^-1 for2, 6−dibromo−4−nitroaniline(DBNA)and0.4−−10.0 μgmL ^-1 for2, 4, 6−tribromoaniline(TBA).Themolarabsorptivityofthecolorsystemswerefoundtobe4.126~×~10⁴ lmol ^-1 cm ^-1 forDBMA, 3.254×10⁴ l~mol ^-1 cm ^-1 forDBNAand2.812×10⁴ lmol ^-1 cm ^-1 forTBA.Sandell'softhecolorreactionsare0.018 μgcm ^-2(DBMA), 0.052 μgcm ^-2(DBNA)and0.065 μgcm ^-2$ (TBA) respectively. The effect of the non-target species on the determination of bendiocarb was studied. The formation of colored derivatives with the coupling agents is instantaneous and stable for 18 h, 30 h, and 12 h. Performance of the proposed methods were compared statistically in terms Student's F and t-tests with the reported methods.