巴西雨林自然保护区河流中杀虫剂残毒:对水生生物和人类健康的影响评价

1998年11月、1999年3月和2000年元月分别在巴西雨林自然保护区河流的水体、沉积物和鱼体中检测杀虫剂残毒,每种杀虫剂浓度与基于急性毒性测试的生态毒理基准进行了比较,并且还与规定标准进行比较,以确定它们对水生生物和人类潜在影响的程度.在所有的7个调查地点都检测出杀虫剂及其代谢产物,在水体以及沉积物样品中检测出总共27种杀虫剂及其代谢物的残毒,鱼类富集其中某些最持久稳固的残毒.水体和沉积物中检测出的杀虫剂残毒浓度表明水生生物保护的问题需要引起重视,水体中的几种杀虫剂含量超过了巴西以及欧盟当局规定的指标,表明对人类的健康也有影响.     

Air formaldehyde and solvent concentrations during surface coating with acid-curing lacquers and paints in the woodworking and furniture industry

An investigation of contemporary exposure to formaldehyde and organic solvents has been carried out during surface coating with acid-curing lacquers and paints in the Norwegian woodworking and furniture industry over a period of 3 years. The investigation covered 27 factories of different sizes and with different types of production, and totally 557 parallel formaldehyde and solvent samples were collected. The formaldehyde concentration (geometric mean) was 0.15 ppm (range 0.01-1.48 ppm) with about 10% of the samples exceeding the Norwegian occupational exposure limit of 0.5 ppm. The solvent concentration as additive effect (geometric mean) was 0.13 (range 0.0004-5.08) and about 5% of the samples exceeded the Norwegian occupational exposure limit. The most frequently occurring solvents from acid-curing lacquers were n-butyl acetate, ethanol, ethyl acetate and 1-butanol, which were found in 88-98% of the samples. Toluene, n-butyl acetate and 1-butanol were the only solvents with maximum concentrations exceeding their respective occupational exposure limits. Curtain painting machine operators were exposed to the highest concentrations of both formaldehyde (geometric mean 0.51 ppm, range 0.08-1.48 ppm) and organic solvents (additive effect, geometric mean 1.18, range 0.02-5.08). Other painting application work tasks such as automatic and manual spray-painting, manual painting and dip painting, showed on average considerably lower concentrations of both formaldehyde (geometric means 0.07-0.16 ppm) and organic solvents (additive effect, geometric mean 0.02-0.18). Non-painting work tasks also displayed moderate concentrations of formaldehyde (geometric means 0.11-0.17 ppm) and organic solvents (additive effect, geometric mean 0.04-0.07).     

Exposure to airborne organophosphates originating from hydraulic and turbine oils among aviation technicians and loaders

This study describes the potential for occupational exposure to organophosphates (OPs) originating from turbine and hydraulic oils, among ground personnel within the aviation industry. The OPs tri-n-butyl phosphate (TnBP), dibutyl phenyl phosphate (DBPP), triphenyl phosphate (TPP) and tricresyl phosphate (TCP) have been emphasized due to their use in such oils. Oil aerosol/vapor and total volatile organic compounds (tVOCs) in air were also determined. In total, 228 and 182 OPs and oil aerosol/vapor samples from technician and loader work tasks during work on 42 and 21 aircrafts, respectively, were collected in pairs. In general, the measured exposure levels were below the limit of quantification (LOQ) for 84%/98% (oil aerosol) and 82%/90% (TCP) of the samples collected during technician/loader work tasks. The air concentration ranges for all samples related to technician work were 相似文献   

Comparative analysis using EIA for developed and developing countries: case studies of hydroelectric power plants in Pakistan,Norway and Sweden

Environmental impact assessment (EIA) is an important legislative and scientific tool that may assist and improve the quality assistance for the decision-making process in sustainable development. Here, a comparison of EIAs from three cases of hydropower projects in Pakistan, Norway and Sweden is reported. A huge difference concerning the incorporation of environmental considerations into the decisionmaking process between developed and developing countries is observed. The EIA system of Pakistan appears to be less efficient in the application and review process. In addition, the appraisal of issues, the decision-making process and evaluation through post-monitoring is not as well performed in Pakistan as in cases of hydroelectric power plants in Sweden and Norway. The key reason for this shortcoming is misconceptions about the EIA process, which initially receives intense attention but becomes weakened by the time of implementation. This implies that there is a need to adopt simplified and flexible EIA techniques suitable for the infrastructure and resources of a specific country, taking into account institutional, technical and financial constraints. Improvements are required in public participation, awareness, as well as in environmental control and data system sectors in Pakistan, besides simply enacting legislation to achieve the goals of the EIA system.     

Occupational exposure to airborne solvents during nail sculpturing

This study describes occupational exposure to acrylates and other solvents during nail sculpturing, including comparative measurements of the exposure using four different sculpturing methods: The acrylic method, the UV-gel method, the acrylic powder method and the resin method. Thirty-two nail technicians working in 22 different salons participated in the study. In total, 92 measurements were performed, comprising 70 solvent measurements and 22 measurements of ethyl 2-cyanoacrylate. The solvents most frequently present in all samples were acetone, ethyl acetate, toluene and n-butyl acetate, measured in 96%, 94%, 91% and 81% of the samples, respectively. The study shows that the overall solvent exposure was low, with all measurements calculated as the additive effect (n = 70) below 20% of the OEL (arithmetic mean 0.06 and range 0.01-0.19). No statistically significant difference between sculpturing methods were observed (p = 0.05).     

Airborne exposure and biological monitoring of bar and restaurant workers before and after the introduction of a smoking ban

The aims were to assess the impact of a total smoking ban on the level of airborne contaminants and the urinary cotinine levels in the employees in bars and restaurants. In a follow up design, 13 bars and restaurants were visited before and after the implementation of a smoking ban. Ninety-three employees in the establishments were initially included into the study. The arithmetic mean concentration of nicotine and total dust declined from 28.3 microg m(-3) (range, 0.4-88.0) and 262 microg m(-3) (range, 52-662), respectively, to 0.6 microg m(-3) (range, not detected-3.7) and 77 microg m(-3) (range, not detected-261) after the smoking ban. The Pearson correlation coefficient between airborne nicotine and total dust was 0.86 (p < 0.001; n = 48). The post-shift geometric mean urinary cotinine concentration declined from 9.5 microg g(-1) creatinine (cr) (95% CI 6.5-13.7) to 1.4 microg g(-1) cr (95% CI 0.8-2.5) after the ban (p < 0.001) in 25 non-snuffing non-smokers. A reduction from 1444 microg g(-1) cr (95% CI 957-2180) to 688 microg g(-1) cr (95% CI 324-1458) was found (p < 0.05) in 29 non-snuffing smokers. The urinary cotinine levels increased from 11.7 microg g(-1) cr (95% CI 7.0-19.6) post-shift to 21.9 microg g(-1) cr (95% CI 13.3-36.3) (p < 0.01) in the next morning in 24 non-snuffing non-smokers before the smoking ban. A substantial reduction of airborne nicotine and total dust was observed after the introduction of a smoking ban in bars and restaurants. The urinary cotinine levels were reduced in non-smokers. The decline found in smokers may suggest a reduction in the amount of smoking after intervention. In non-smokers cotinine concentrations were higher based on urine sampled the morning after a shift than based on urine sampled immediately post-shift.     

Organophosphates in aircraft cabin and cockpit air--method development and measurements of contaminants

Methods for measurements and the potential for occupational exposure to organophosphates (OPs) originating from turbine and hydraulic oils among flying personnel in the aviation industry are described. Different sampling methods were applied, including active within-day methods for OPs and VOCs, newly developed passive long-term sample methods (deposition of OPs to wipe surface areas and to activated charcoal cloths), and measurements of OPs in high-efficiency particulate air (HEPA) recirculation filters (n = 6). In total, 95 and 72 within-day OP and VOC samples, respectively, have been collected during 47 flights in six different models of turbine jet engine, propeller and helicopter aircrafts (n = 40). In general, the OP air levels from the within-day samples were low. The most relevant OP in this regard originating from turbine and engine oils, tricresyl phosphate (TCP), was detected in only 4% of the samples (min-max 相似文献   

Harmonized Nordic strategies for isocyanate monitoring in workroom atmospheres

The Nordic Network on Isocyanates (NORDNI) is financed by the Nordic Council of Ministers and is under the administration of Prof. Yngvar Thomassen and co-workers. National Institute of Occupational Health, Norway. The aim of NORDNI is to establish a broad network between the Nordic National Institutes of Occupational Health working within the field of isocyanate exposure and strategies for sampling and determination of isocyanates in workroom atmospheres. This viewpoint article summarizes the resolutions that were established at the 1st NORDNI consensus meeting arranged in Fr?ya, Norway, 31st August-2nd September, 2001. The consensus platform from the 1st NORDNI meeting was presented at the 4th International Symposium on Modern Principles of Air Monitoring, Lillehammer, Norway, 3-7 February, 2002.     

Determination of the dialdehyde glyoxal in workroom air-development of personal sampling methodology

The dialdehyde glyoxal (ethanedial) is an increasingly used industrial chemical with potential occupational health risks. This study describes the development of a personal sampling methodology for the determination of glyoxal in workroom air. Among the compounds evaluated as derivatizing agents; N-methyl-4-hydrazino-7-nitrobenzofurazan (MNBDH), 1,2-phenylenediamine (OPDA), 1-dimethylaminonaphthalene-5-sulfonylhydrazine (dansylhydrazine, DNSH) and 2,4-dinitrophenylhydrazine (DNPH), DNPH was the only reagent that was suitable. Several different samplers were evaluated for sampling efficiency of glyoxal in workroom air using DNPH as derivatizing agent; in-house DNPH coated silica particles packed in two different types of glass tubes, impingers containing acidified DNPH solution, filter cassettes containing glass fibre filters coated with DNPH, a commercially available solid phase cartridge sampler originally developed for formaldehyde sampling (Waters Sep-Pak DNPH-silica cartridge), and the commercially available SKC UMEx 100 passive sampler originally developed for formaldehyde sampling. Aldehyde atmospheres for sampler evaluation were generated with an in-house made vapour atmosphere generator coupled to a sampling unit, with the possibility of parallel sampling. The resulting glyoxal-DNPH derivative was determined using both LC-UV and LC-APCI-MS with negative ionization. By far, the highest recovery of glyoxal was obtained employing one of the in-house DNPH coated silica samplers (93%, RSD = 3.6%, n = 12).     

Compact semi-automatic incident sampler for personal monitoring of volatile organic compounds in occupational air

Suddenly occurring and time limited chemical exposures caused by unintended incidents might pose a threat to many workers at various work sites. Monitoring of exposure during such occasional incidents is challenging. In this study a compact, low-weight and personal semi-automatic pumped unit for sampling of organic vapor phase compounds from occupational air during sporadic and suddenly occurring incidents has been developed, providing simple activation by the worker potentially subjected to the sudden occurring exposures when a trained occupational hygienist is not available. The sampler encompasses a tube (glass or stainless steel) containing an adsorbent material in combination with a small membrane pump, where the adsorbent is capped at both ends by gas tight solenoid valves. The sampler is operated by a conventional 9 V battery which tolerates long storage time (at least one year), and is activated by pulling a pin followed by automatic operation and subsequent closing of valves, prior to shipping to a laboratory. The adjustable sampling air flow rate and the sampling time are pre-programmed with a standard setting of 200 mL min(-1) and 30 min, respectively. The average airflow in the time interval 25-30 min compared to average airflow in the interval 2-7 min was 92-95% (n = 6), while the flow rate between-assay precisions (RSD) for six different samplers on three days each were in the range 0.5-3.7%. Incident sampler recoveries of VOCs from a generated VOC atmosphere relative to a validated standard method were between 95 and 102% (+/-4-5%). The valves that seal the sampler adsorbent during storage have been shown to prevent an external VOC atmosphere (500 mg m(-3)) to enter the adsorbent tube, in addition to that the sampler adsorbent is storable for at least one month due to absence of ingress of contaminants from internal parts. The sampler was also suitable for trapping of semi-volatile organophosphates.