Isolation and Identification of Enterococci from Seawater Samples: Assessment of Their Resistance to Antibiotics and Heavy Metals

A hundred Enterococcus strains were isolated from seawater samples collected from coastal areas of Istanbul. Isolates were identified to the species level using standard biochemical tests specified by Facklam and Collins. The species distribution was as follows Enterococcus faecalis (96%), Enterococcus gallinarum (3%) and Enterococcus solitarius (1%). The resistance of bacteria to both heavy metals (zinc [Zn], iron [Fe], cadmium [Cd], chrome [Cr], cobalt [Co]) and antibiotics (ampicillin 10 μg [AP], penicillin G 10 Units [PG], gentamycin 10 μg [GM], streptomycin 10 μg [S], chloramphenicol 10 μg [C], erythromycin 15 μg [E], kanamycin 30 μg [K], amikacin 30 μg [AK], nalidixic acid 30 μg [NA], and vancomycin 30 μg [VA]) was evaluated. None of the strains was resistant to VA. It was found that among the 100 isolates, those that exhibit resistance to antibiotics, particularly NA, S and K, were also resistant all the heavy metals tested. To our knowledge this is the first report focusing on determination of resistance of environmental enterococci found in Istanbul against heavy metals and antibiotics. Thus, combined expressions of antibiotic and heavy metal resistance may help to reinforce ecological and epidemiological studies and to determine the role of these strains in antibiotic and heavy metal resistance dissemination.     

Dynamic equilibrium of radiocesium with stable cesium within the soil-mushroom system in Turkish pine forest

Mushrooms and soils collected from pine forests in Izmir, Turkey were measured for radiocesium and stable Cs in 2002. The ranges of (137)Cs and stable Cs concentrations in mushrooms were 9.84+/-1.67 to 401+/-3.85Bqkg(-1) dry weight and 0.040+/-0.004 to 11.3+/-1.09mgkg(-1) dry weight, respectively. The concentrations of (137)Cs and stable Cs in soils were 0.29+/-0.18 to 161+/-1.12Bqkg(-1) dry weight and 0.14+/-0.004 to 1.44+/-0.045mgkg(-1) dry weight, respectively. Even though different species were included, the concentration ratios of (137)Cs to stable Cs were fairly constant for samples collected at the same forest site, and were in the same order of magnitude as the (137)Cs to stable Cs ratios for the organic soil layers. The soil-to-mushroom transfer factors of (137)Cs and stable Cs were in the range of 0.19-3.15 and 0.17-12.3, respectively. The transfer factors of (137)Cs were significantly correlated to those of stable Cs.     

Histopathological effects of carbaryl on testes of snake-eyed lizard, Ophisops elegans

Background, aim and scope  

Due to their ecological niche and insectivore nature, lizards are of increased risk of exposure to pesticides in agricultural areas. In addition to their potential direct effects on non-target species, insecticides can also result in indirect impacts on lizard population by reducing their food source. Carbaryl is a common insecticide that is widely used in areas of Turkey that are home to a variety of reptiles. However, to date, little is known about the potential effects of the exposure of reptiles such as lizards or snakes to this pesticide. The aim of the study was to investigate toxic effects of carbaryl on the testes of snake-eyed lizard, Ophisops elegans that is common to regions in Turkey where Carbaryl is applied and that it can be easily cultured in the laboratory.     

Levels of organohalogenated persistent pollutants in human milk from Kahramanmaraş region, Turkey

The levels of 1,1,1-trichloro-bis-2,2'-(4-chlorophenyl) ethane (p,p'-DDT) and its metabolites, hexachlorobenzene (HCB), hexachlorocyclohexane isomers (HCHs), chlordanes (trans- and cis-chlordane, oxychlordane and trans-nonachlor), 11 polychlorinated biphenyl (PCB) congeners, and 7 polybrominated diphenyl ether (PBDE) congeners were measured in 37 individual human milk samples from Kahramanmara? region, Turkey. Organochlorine pesticides were the major contaminants in the milk samples. p,p'-DDE and p,p'-DDT were detected in all samples, while beta-HCH had a detection frequency of 97%. The sum of the DDTs in human milk samples varied between 0.52 and 315.8 ng/g wet weight (ww) with a mean ratio between p,p'-DDE and p,p'-DDT equal to 31.1. p,p'-DDD could be measured only in six samples. beta-HCH was the most prevalent HCH isomer with a mean value of 2.08 ng/g ww. The mean concentration of gamma-HCH was 0.38 ng/g ww, while alpha-HCH was not detected in any sample. HCB is found in 95% of the milk samples with a mean concentration of 0.30 ng/g ww. The mean value for the sum of chlordanes was 0.39 ng/g ww, with oxychlordane and trans-nonachlor being the principal contributors. PCBs could be measured only in 8 out of 37 samples and their concentration ranged between <0.15 and 1.92 ng/g ww for the sum of PCBs. PCB profiles were dominated by congeners 153, 180 and 138. PBDEs were detected only in 3 out of 37 samples, with the highest value being 0.014 ng/g ww (0.40 ng/g lipid weight) and BDE 47 was the dominant congener. Although the number of samples is relatively low and they are not representative for the whole Turkish population, the results of the present study are important to provide additional data on the concentrations of persistent organochlorinated pollutants in Turkey and show as first the PBDE levels in Turkish population.     

对核磁共振成像仪建设项目环境影响评价的研究

核磁共振作为一种分析手段广泛应用于物理、化学、生物、医疗等领域.本文从核磁共振原理出发,分析核磁共振成像仪主要环境影响,结合环评现状,分析环评管理存在的主要问题,结合相关法规条文,查找存在这些问题的主要原因,结合目前核磁共振仪的建设情况和使用条件,从切合实际角度出发,提出核磁共振成像仪建设项目环评管理建议.     

Biodiesel production from vegetable oil and waste animal fats in a pilot plant

In this study, corn oil as vegetable oil, chicken fat and fleshing oil as animal fats were used to produce methyl ester in a biodiesel pilot plant. The FFA level of the corn oil was below 1% while those of animal fats were too high to produce biodiesel via base catalyst. Therefore, it was needed to perform pretreatment reaction for the animal fats. For this aim, sulfuric acid was used as catalyst and methanol was used as alcohol in the pretreatment reactions. After reducing the FFA level of the animal fats to less than 1%, the transesterification reaction was completed with alkaline catalyst. Due to low FFA content of corn oil, it was directly subjected to transesterification. Potassium hydroxide was used as catalyst and methanol was used as alcohol for transesterification reactions. The fuel properties of methyl esters produced in the biodiesel pilot plant were characterized and compared to EN 14214 and ASTM D6751 biodiesel standards. According to the results, ester yield values of animal fat methyl esters were slightly lower than that of the corn oil methyl ester (COME). The production cost of COME was higher than those of animal fat methyl esters due to being high cost biodiesel feedstock. The fuel properties of produced methyl esters were close to each other. Especially, the sulfur content and cold flow properties of the COME were lower than those of animal fat methyl esters. The measured fuel properties of all produced methyl esters met ASTM D6751 (S500) biodiesel fuel standards.     

Determining land use changes by radar-optic fused images and monitoring its environmental impacts in Edremit region of western Turkey

Rapid and unplanned urbanization and industrialization are the main reasons of environmental problems. If urban growth is not based on resource sustainability criteria and urban plans are not applied, natural and human resources are damaged dramatically. In this study, land use change and urban expansion in Edremit region of Turkey is determined by means of remote sensing techniques between 1971 and 2002. To improve the accuracy of land use/cover maps, the contribution of SAR images to optic images in defining land cover types was investigated. To determine the situation of land use/cover types in 2002 accurately, Landsat-5 images and Radarsat-1 images were fused, and the land use/cover types were defined from the fused images. Comparisons with the ground truth reveal that land use maps generated using the fuse technique are improved about 6% with an accuracy of 81.20%. To define land use types and urban expansion, screen digitizing and classification methods were used. The results of the study indicate that the urban areas have been increased 1,826 ha across the agricultural fields which are in land use capability classes of I and II, and significant environmental changes such as land degradation and degeneration of ground water quality occurred.     

Utilization of gold tailings as an additive in Portland cement.

Mine tailings are formed as an industrial waste during coal and ore mining and processing. In the investigated process, following the extraction of gold from the ore, the remaining tailings are subjected to a two-stage chemical treatment in order to destroy the free cyanide and to stabilize and coagulate heavy metals prior to discharge into the tailings pond. The aim of this study was the investigation of the feasibility of utilization of the tailings as an additive material in Portland cement production. For this purpose, the effects of the tailings on the compressive strength properties of the ordinary Portland cement were investigated. Chemical and physical properties, mineralogical composition, particle size distribution and microstructure of the tailings were determined by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), particle size analyzer (Mastersizer) and scanning electron microscope (SEM). Following the characterization of the tailings, cement mortars were prepared by intergrinding Portland cement with dried tailings. Composition of the cement clinkers were adjusted to contain 5, 15, 25% (wt/wt) dried tailings and also silica fume and fly ash samples (C and F type) were added to clinker in different ratios. The mortars produced with different amounts of tailings, silica fume, fly ashes and also mixtures of them were tested for compressive strength values after 2, 7, 28 and 56 days according to the European Standard (EN 196-1). The results indicated that gold tailings up to 25% in clinker could be beneficially used as an additive in Portland cement production. It is suggested that the gold tailings used in the cement are blended with silica fume and C-type fly ash to obtain higher compressive strength values.