Characteristics of Stormwater Quality from Two Urban Watersheds in Singapore

This paper presents the results of a study on the quality of stormwater runoff from two adjacent urban watersheds in Singapore. The study involved continuous recording of rainfall and streamflow within the basins, and systematic sampling of storm runoff during rainfall events. The water samples collected were analysed for its physical and chemical constituents. The ranges and mean concentrations of common quality parameters have been established, and the flushing effects of selected parameters were studied. Correlations of event mean concentrations and pollution loads of total suspended solids and chemical oxygen demand to both antecedent dry weather period and rainfall characteristics were also carried out.     

酞酸酯对人与环境的危害

酞酸酯是一种增塑剂，随着时间的推移，可由塑料中转移到外环境，现已成为地球上最为广泛存在的环境污染物。该文较系统地介绍了酞酸酯的理化性质，毒性和致癌作用，以及其对环境的影响，环境行为，动物的吸收，分布、代谢和排泄等等，最后还对酞酸酯的有关毒性评价作了部分介绍。     

Diopside-based glass-ceramics from MSW fly ash and bottom ash

By utilising MSW fly ash from the Shanghai Yuqiao municipal solid waste (MSW) incineration plant as the main raw material, diopside-based glass-ceramics were successfully synthesized in the laboratory by combining SiO(2), MgO and Al(2)O(3) or bottom ash as conditioner of the chemical compositions and TiO(2) as the nucleation agent. The optimum procedure for the glass-ceramics is as follows: melting at 1500 degrees C for 30 min, nucleating at 730 degrees C for 90 min, and crystallization at 880 degrees C for 10h. It has been shown that the diopside-based glass-ceramics made from MSW fly ash have a strong fixing capacity for heavy metals such as lead (Pb), chromium (Cr), cadmium (Cd) etc.     

Process evaluation for optimization of EDTA use and recovery for heavy metal removal from a contaminated soil

This study aimed to establish an optimized, closed loop application of ethylenediaminetetraacetic acid (EDTA) in heavy metal removals from a contaminated soil through integrating EDTA recovery/regeneration and metal precipitation processes in the treatment train. Three divalent heavy metals were investigated, namely, Pb, Cd, and Ni. The extractability of the metals by EDTA followed the decreasing order of CdPb>Ni. The first part of this study was to search for the optimal use of the fresh EDTA in removing these heavy metals from the contaminated soil. The second part of this study was devoted to the recovery/regeneration of the spent EDTA which followed the sequential processes involving (1) complex destabilization by adding ferric ion (Fe(III)) to liberate Pb, Cd, and Ni, (2) precipitation of the liberated Pb, Cd, and Ni in phosphate (PO4(3-)) forms, and (3) precipitation of the excess Fe(III) which eventually produced free EDTA for reuse. The process variables were dosages of Fe(III) and PO4(3-), pH and reaction times. Laborious trial experiments would be needed in searching for the optimum conditions for the above processes. To expedite this exercise, a geochemical equilibrium model, MINTEQA2, was used to find the thermodynamically favorable conditions for recoveries of both EDTA and heavy metals. This was then followed by experimental examination of the process kinetics to observe for the optimal reaction time for each thermodynamically favorable process. This study revealed that 2 h of reaction time each for the complex destabilization reaction and the metal phosphate precipitation reaction was sufficient to achieve equilibrium. With the optimized process condition identified in this study, a total of 95%, 89% and 90% of the extracted Pb, Cd and Ni, respectively, could be precipitated from the spent EDTA solution, with 84% EDTA recovery. The reused EDTA maintained more than 90% of its preceding extraction power in each cycle of reuse.     

Non-Conventional Construction Materials from Dredging Spoils

As a result of increasing environmental concerns on offshore dumping, dredging spoils arising from reclamation and harbour works will create another problem of disposal. The spoils are usually not suitable for use as landfill materials as they have little bearing capacities. The disposal problem could, however, be reduced if there is an alternative use for it. This paper describes a laboratory study on the use of dredging spoils together with limestone as raw materials for the production of cementitious building materials. Different compositions of the raw materials were ground and incinerated to produce cement. The cementitious material produced after incineration was also mixed with ordinary Portland cement for use as blended cement. The study shows that dredging spoils could be used to produce cement satisfying the strength requirements for masonry cement. When used as blended cement, it can replace up to 30% by weight of ordinary Portland cement without reducing the strength.     

超塑性恒压充模胀形过程中材料的流动和充填规律

采用刚粘塑性有限元法模拟超塑性恒压充模胀形过程,给出了材料质点的流动轨迹和不同时刻的胀形件剖面形状,分析了模具几何形状参数对单元贴模次序、贴模部位的影响。     

Rapid Assessment of Hydrologic Performance of Low Impact Development Practices under Design Storms

Low impact development (LID) practices are often applied to compensate for surface imperviousness caused by urban development. These practices can mitigate flood risk by reducing runoff volume and peak flow and by delaying the time to peak flow. To select a suitable LID practice type and its surface area during the preliminary design process, it is necessary to rapidly estimate the hydrologic performance of various LID designs under design storms. This study provides a method and a toolbox for rapid assessment of the hydrologic performance of various LID practices, which can be useful to developers for establishment of preliminary LID designs. The hydrologic performance of three common types of LID practices (i.e., green roofs, bioretention cells, and infiltration trenches) under various design storms is first simulated using the Storm Water Management Model (SWMM). The results are then presented as performance curves on a unit storage basis. Look‐up tables are further developed to assist the comparison and selection of the LID alternatives for various hydrologic performance targets. To facilitate SWMM modeling, a MATLAB toolbox is developed to automate the process of input modification, model simulation, result extraction, and postprocessing. Finally, the sensitivity of the look‐up curves to design storm types and design specifications of bioretention cells is also analyzed, and the assumptions used in the development of these look‐up curves are validated.     

Embryonic and fetal globins are expressed in adult erythroid progenitor cells and in erythroid cell cultures

The understanding of human hemoglobin ontogeny during development is of biological and clinical importance. Molecular and immunocytological techniques were used to study the expression of embryonic zeta (ζ), epsilon (ε), and fetal gamma (γ) globin genes in newborn cord blood, peripheral blood from men, pregnant and non-pregnant women, and in vitro mononuclear cell cultures. We have shown that embryonic and fetal globin mRNA and peptides are expressed in cultured erythroid cells and in circulating blood cells from newborns, adult non-pregnant women and from men. The findings suggest that during erythroid cell differentiation in newborns and adults, there is a transient recapitulation of sequential globin chain expression as found during embryonic and fetal development. Furthermore, these findings underscore the need for caution in using embryonic and fetal globin chains as markers to identify erythroid cells of fetal origin in maternal circulation for prenatal diagnosis. Copyright © 2001 John Wiley & Sons, Ltd.