Comparison of Two Manual Methods of Nitrogen Dioxide Determination in Ambient Air

Sodium arsenite (modified Jacobs and Hochheiser method; hereafter referred as SA), the most widely used manual monitoring method for determination of nitrogen dioxide (NO₂) in ambient air, particularly in developing countries has been evaluated and compared with US EPA recommended equivalent method of TGS-ANSA (hereafter referred as ANSA). NO₂ concentrations generated from laboratory test atmosphere were analyzed by these two methods and were compared statistically. Laboratory evaluations showed that SA method has high sensitivity to different sampling conditions, which normally vary during actual field monitoring. Hence, correction factors for absorption efficiency were estimated for SA and ANSA methods. Absorption efficiency of NO₂ in SA method was found to be much lower (64%) as against the reported value of 82% at the method recommended sampling conditions, whereas for ANSA method, it was found 1.0 as against the reported value of 0.93. After applying derived correction factors, both the methods produced almost similar concentration values of NO₂.     

Biosynthesis of Poly(3-hydroxybutyrate) from Cheese Whey by <Emphasis Type="Italic">Bacillus megaterium</Emphasis> NCIM 5472

Microbial polyhydroxyalkonate such as homopolyester of poly(3-hydroxybutyrate) (PHB) was produced from cheese whey by Bacillus megaterium NCIM 5472. Due to their numerous potential industrial applications, the focus was given to competently enhance the amount of PHB produced. The amount of PHB produced from whole cheese whey, and ultrafiltered cheese whey was first compared, and after observing a rise in PHB production by using ultrafiltered cheese whey, cheese whey permeate was chosen for further analysis. The presence of PHB was then confirmed by GCMS. Since the main aim of the study was to increase the amount of PHB produced through batch fermentation, various process parameters like time, pH, C/N ratio, etc. were optimized. After optimization, it was found that B. megaterium NCIM 5472 was capable of accumulating 75.5% of PHB of its dry weight and a PHB yield of 8.29 g/L. The chemical structure of the polymer was further analyzed by using FTIR and NMR spectroscopy methods. Also, the physical and thermal properties were studied by using Differential scanning calorimetry and Thermogravimetric analysis. It was found that the polymer produced had excellent thermal stability, thus allowing the possibility to exploit its properties for industrial purposes such as adhesives, packaging materials, etc.     

Biosequestration of lead using Bacillus strains isolated from seleniferous soils and sediments of Punjab

The present study was conducted to isolate and explore bacterial strains with a potential to sequester lead (Pb) and tolerate other heavy metals from industrial effluents and sediments. Out of the six bacterial strains isolated from seleniferous sites of Punjab, three isolates (RS-1, RS-2, and RS-3) were screened out for further growth-associated lead sequestration and molecular characterization on the basis of their tolerance toward lead and other heavy metals. Biomass and cell-free supernatant were analyzed for lead contents using ICP-MS after growth-associated lead sequestration studies in tryptone soya broth (pH?=?7.2?±?0.2) under aerobic conditions at 37 °C temperature. Almost 82 % and 70 % divalent lead was sequestered in cell pellets of RS-1 and RS-3, respectively while only 45 % of lead was found in cell pellet of RS-2 in the first 24 h. However, significant biosequestration of lead was observed in RS-2 after 48 h of incubation with concomitant increase in biomass. Simultaneously, morphological, biochemical, and physiological characterization of selected strains was carried out. 16S rRNA gene sequence of these isolates revealed their phylogenetic relationship with class Bacillaceae, a low G + C firmicutes showing 98 % homology with Bacillus sp.     

Assessment of environmental benefits of flyover construction over signalized junctions: a case study

In the present study, the impact of the flyover construction to curb traffic congestion problem has been assessed in terms of traffic decongestion, time saving, fuel saving and emission reduction. A flyover has also been constructed over four signalized junctions in the main commercial area in Nagpur city, India. It was found that about 35% of the total traffic is diverted to the flyover, which results in a reduction of about 32% in the total emission generation. Travel on the flyover resulted in as much as 60-70% saving in time, compared to the travel on the main road, particularly when all the four signals are found to be in the red phase. The loss of fuel for combustion and the associated cost resulting from waiting for the signal to change are also estimated, and these are found to be significant.     

Can adaptive modulation of traits to urban environments facilitate Ricinus communis L. invasiveness?

This paper addresses the phenotypic variation among Ricinus communis L. populations in four urban habitat types (road verges, garbage dumps, construction debris, and natural area) in Delhi, India, by evaluating important traits such as plant height, basal circumference, seeds per plant, seed size, seed weight, specific leaf area, and reproductive index. An important biochemical marker, proline, considered as a good plant performance indicator under stress was also quantified in leaves of R. communis to evaluate its response in different habitats. Interestingly, the species showed significant variation in plant height, specific leaf area, seed size, seed weight, and leaf proline content in different habitat types. Leaf proline content was positively related to plant height, specific leaf area, and seed size while negatively related to the total number of seeds/plant. Interestingly, reproductive index, calculated as a ratio of the total number of seeds to the plant height also showed a negative relation with leaf proline content. Results indicated that R. communis exhibits adaptive modulation of growth, reproductive traits, and leaf proline content in various urban habitats which contributes to invasiveness, range expansion, and establishment of the species. The study also gives evidence of how morphological and physiological traits could directly affect invasiveness of R. communis.     

Indoor–outdoor concentrations of RSPM in classroom of a naturally ventilated school building near an urban traffic roadway

A study on indoor–outdoor RSPM (PM₁₀, PM_2.5 and PM_1.0) mass concentration monitoring has been carried out at a classroom of a naturally ventilated school building located near an urban roadway in Delhi City. The monitoring has been planned for a year starting from August 2006 till August 2007, including weekdays (Monday, Wednesday and Friday) and weekends (Saturday and Sunday) from 8:0 a.m. to 2:0 p.m., in order to take into account hourly, daily, weekly, monthly and seasonal variations in pollutant concentrations. Meteorological parameters, including temperature, rH, pressure, wind speed and direction, and traffic parameters, including its type and volume has been monitored simultaneously to relate the concentrations of indoor–outdoor RSPM with them. Ventilation rate has also been estimated to find out its relation with indoor particulate concentrations. The results of the study indicates that RSPM concentrations in classroom exceeds the permissible limits during all monitoring hours of weekdays and weekends in all seasons that may cause potential health hazards to occupants, when exposed. I/O for all sizes of particulates are greater than 1, which implies that building envelop does not provide protection from outdoor pollutants. Further, a significant influence of meteorological parameters, ventilation rate and of traffic has been observed on I/O. Higher I/O for PM₁₀ is indicating the presence of its indoor sources in classroom and their indoor concentrations are strongly influenced by activities of occupants during weekdays.     

Post-irrigation impact of domestic sewage effluent on composition of soils,crops and ground water--a case study

Long-term irrigation with sewage water adds large amounts of carbon, major and micro- nutrients to the soil. We compared the spatial distribution of N, P, K and other micronutrients and toxic elements in the top 0.6 m of an alluvial soil along with their associated effects on the composition of crops and ground waters after about three decades of irrigation with domestic sewage effluent as a function of distance from the disposal point. Use of sewage for irrigation in various proportions improved the organic matter to 1.24-1.78% and fertility status of soils especially down to a distance of 1 km along the disposal channel. Build up in total N was up to 2908 kg ha(-1), available P (58 kg ha(-1)), total P (2115 kg ha(-1)), available K (305 kg ha(-1)) and total K (4712 kg ha(-1)) in surface 0.15 m soil. Vertical distribution of these parameters also varied, with most accumulations occurring in surface 0.3 m. Traces of NO3-N (up to 2.8 mg l(-1)), Pb (up to 0.35 mg l(-1)) and Mn (up to 0.23 mg l(-1)) could also be observed in well waters near the disposal point thus indicating initiation of ground water contamination. However, the contents of heavy metals in crops sampled from the area were below the permissible critical levels. Though the study confirms that the domestic sewage can effectively increase water resource for irrigation but there is a need for continuous monitoring of the concentrations of potentially toxic elements in soil, plants and ground water.     

MTBE oxidation byproducts from the treatment of surface waters by ozonation and UV-ozonation

In recent years, there has been considerable concern over the release of methyl tert-butyl ether (MTBE), a gasoline additive, into the aquifers used as potable water sources. MTBE readily dissolves in water and has entered the environment via gasoline spills and leaking storage tanks. In this paper, we investigate ozonation and UV-ozonation for treatment of MTBE in contaminated drinking water sources. We report the test protocol and results of using solid-phase microextraction (SPME) to determine the level of MTBE and its oxidation byproducts in samples drawn from laboratory-scale ozone and UV-ozone reactors being evaluated at a US EPA research facility. Analysis of a prepared MTBE standard indicated a detection limit on the order of 0.1 microgl(-1) with a repeatability of +/-0.4%. Results show that the overall rate of removal of MTBE via UV-ozonation in a relatively turbid surface water (15 ntu) is twice that of ozonation alone. In addition, GC-MS analysis of decomposition products showed that tert-butyl formate (TBF), methyl acetate, butene, acetone, and acetaldehyde were produced by both processes. TBF and butene reach similar maximum yields from the two processes, but are more efficiently degraded by UV-ozonation treatment. This indicates that these treatment processes also degrade these byproducts. In contrast, the remaining byproducts (methyl acetate, acetone, and acetaldehyde) are formed at similar levels during treatment, but are not degraded once formed. These byproducts may be resistant to hydrogen abstraction by hydroxyl radical.     

Air pollution modeling for an industrial complex and model performance evaluation

Jamshedpur, the steel city of India situated in the eastern part of India is affected by increasing air pollution levels as a result of concentrated industrial activities. The impact of NOx emissions resulting from various air pollution sources, viz. industries, vehicles and domestic, was estimated using Industrial Source Complex Short-Term gaussian dispersion model. The contribution of NOx concentration from industrial, vehicular and domestic sources was found to be 53, 40 and 7%. Further statistical analysis was carried out to evaluate the model performance by comparing measured and predicted NOx concentrations. The model performance was found good with an accuracy of about 68%.