Estimation of the Thermal Sensitivity of a Dwelling to Variations in Architectural and Behavioural Parameters

The provision of energy for households is a major contributor to greenhouse gas emissions in the domestic sector. There is significant scope for energy savings and thus emission reduction in this sector. This paper constructs a bridge between thermal analysis and environmental assessment in the occupancy stage of the dwelling life cycle, approaching both methods as being on a common system Environment–Dwelling–Inhabitant. The importance of the local level in the thermal analysis and assessment of either a dwelling or an inhabitant's behaviour is demonstrated. It is shown that the researcher can choose between natural experiment, computer experiment and mathematical modelling to analyze the system. Such a choice is discussed for two particular methods of thermal analysis. Thermal Nomograms are the result of mathematical modelling, and the Energy Score Sheet is the result of a computer experiment in energy rating. Despite being developed for the purpose of thermal analysis, these methods can also be utilized for environmental assessment at the local level. The discussion centres on Australian conditions where the majority of the population resides in a relatively benign climate wherein behavioural alterations have significant potential for energy savings and environmental impact. The purpose of the paper is to emphasise benefits apart from energy minimisation to promote the use of energy efficient housing strategies.     

Biofilm structure and its influence on clogging in drip irrigation emitters distributing reclaimed wastewater

Using reclaimed wastewater for crop irrigation is a practical alternative to discharge wastewater treatment plant effluents into surface waters.However,biofouling has been identified as a major contributor to emitter clogging in drip irrigation systems distributing reclaimed wastewater.Little is known about the biofilm structure and its influence on clogging in the drip emitter flow path.This study was first to investigate the microbial characteristics of mature biofilms present in the emitters and the effect of flow path structures on the biofilm microbial communities.The analysis of biofilm matrix structure using a scanning electron microscopy (SEM) revealed that particles in the matrix of the biofilm coupled extracellular polysaccharides (EPS) and formed sediment in the emitter flow path.Analysis of biofilm mass including protein,polysaccharide and phospholipid fatty acids (PLFAs) showed that emitter flow path style influenced biofilm community structure and diversity.The correlations of biofilm biomass and discharge reduction after 360 h irrigation were computed and suggest that PFLAs provide the best correlation coefficient.Comparatively,the emitter with the unsymmetrical dentate structure and shorter flow path (Emitter C) had the best anti-clogging capability.By optimizing the dentate structure,the internal flow pattern within the flow path could be enhanced as an important method to control the biofilm within emitter flow path.This study established electron microscope techniques and biochemical microbial analysis methods that may provide a framework for future emitter biofilm studies.     

Unique zinc mass in mandibles separates drywood termites from other groups of termites

Previously, the presence of metals in arthropod mandibles has been linked with harder cuticle, and in termites, a 20% increase in hardness has been found for mandibles containing major quantities of zinc. The current study utilises electron microscopy and energy-dispersive X-ray microanalysis to assess incidence and abundance of metals in all extant subfamilies of the Isoptera. The basal clades contain no zinc and little to no manganese in the cutting edge of the mandible cuticle, suggesting that these states are ancestral for termites. However, experimentation with mandibles in vitro indicates the presence of some elements of the cuticular biochemistry necessary to enable uptake of zinc. The Termopsidae, Serritermitidae, Rhinotermitidae and Termitidae all contain minor quantities of manganese, while trace to minor quantities of zinc occur in all except the Serritermitidae. In contrast, all Kalotermitidae or drywood termites contain major levels of zinc in the mandible edge. Diet and life type are explored as links to metal profiles across the termites. The presence of harder mandibles in the drywood termites may be related to lack of access to free water with which to moisten wood. Scratch tests were applied to a set of mandibles. The coefficient of friction for Cryptotermes primus (Kalotermitidae) mandibles, when compared with species from other subfamilies, indicates that zinc-containing mandibles are likely to be more scratch resistant.     

Evaluating the use of occupational standards for controlling toxic air pollutants

Currently, the U.S. Environmental Protection Agency has established air standards for relatively few chemicals. As a result, state agencies are faced with controlling air contaminants for a large number of chemicals posing potential public health threats. Use of occupational standards as a basis for deriving ambient air guidelines is a method used by states to control air toxics. This standard development approach is reviewed by considering the differences in the health basis and numerical values which often occur among the occupational standards set by OSHA, NIOSH and ACGIH. This study indicated that careful selection should be made of the most appropriate occupational standard to use to protect public health. A comparison is made of chemicals regulated by various state air toxic programs using occupational standards lowered by a safety factor to concentrations established by the U.S. EPA. It was found that the air guidelines vary, but the degree of stringency can be comparable.     

Differential use of stored sperm during oviposition in the damselfly Calopteryx splendens xanthostoma (Charpentier)

Female Calopteryx splendens xanthostoma (Charpentier) (Odonata), have two discrete sperm storage organs, the bursa copulatrix and the paired spermathecae. We used the Random Amplified Polymorphic DNA(RAPD) profiling technique to determine from which sperm storage organ spermatozoa were used to fertilise eggs during behaviourally distinct oviposition bouts. During oviposition bouts following remating sperm from the bursa copulatrix are largely used to fertilise eggs, but when females avoid remating before an oviposition bout the sperm used to fertilise eggs are derived mainly from the paired spermathecae. Our observations suggest that female C. s. xanthostoma can avoid male paternity assurance mechanisms by a combination of behavioural and anatomical adaptation: the reason(s) they do so is unclear. Received: 28 November 1995/Accepted after revision: 5 August 1996     

The Early Miocene Cape Melville Formation fossil assemblage and the evolution of modern Antarctic marine communities

The fossil community from the Early Miocene Cape Melville Formation (King George Island, Antarctica) does not show the archaic retrograde nature of modern Antarctic marine communities, despite evidence, such as the presence of dropstones, diamictites and striated rocks, that it was deposited in a glacial environment. Unlike modern Antarctic settings, and the upper units of the Eocene La Meseta Formation on Seymour Island, Antarctica, which are 10 million years older, the Cape Melville Formation community is not dominated by sessile suspension feeding ophiuroids, crinoids or brachiopods. Instead, it is dominated by infaunal bivalves, with a significant component of decapods, similar to present day South American settings. It is possible that the archaic retrograde structure of the modern community did not fully evolve until relatively recently, maybe due to factors such as further cooling and isolation of the continent leading to glaciations, which resulted in a loss of shallow shelf habitats.     

Effects of veterinary fences on Wildlife conservation in Zimbabwe

In Zimbabwe, veterinary fences are used to control trypanosomiasis and foot- and-mouth disease, two important diseases that threaten cattle production and beef exports. Wildlife is implicated in both instances and the effects of fences on wildlife conservation and land use are discussed in relation to these two diseases. Advantages and disadvantages related to direct and indirect fence effects are outlined. Although the maintenance of fences for trypanosomiasis control is likely to become obsolete, control of foot- and-mouth disease will rely on fences for the foreseeable future. Most of Zimbabwe's protected wildlife areas are located in marginal agricultural land around the periphery of the country where cattle productivity is low. This land should be excluded from any involvement in the beef export industry rather than attempting its inclusion through cordoning and isolating individual protected areas. Within such land, the need for rigid veterinary restrictions should then disappear and allow more flexible strategies for disease control, including adaptive and imaginative approaches to land-use planning.     

Insect mandibles—comparative mechanical properties and links with metal incorporation

A number of arthropod taxa contain metals in their mandibles (jaws), such as zinc, manganese, iron, and calcium. The occurrence of zinc and its co-located halogen chlorine have been studied in relation to the mechanical properties and shown to be linked in a direct fashion with increasing concentration. Hardness along with elastic modulus (stiffness) has also been linked to zinc and halogen concentration in some marine polychaete worms. The metal appears to be incorporated within the biological matrix, possibly bonding with proteins. However, the comparative advantage of metal inclusion has not been tested. It is possible that without metals, alternative mechanisms are used to achieve hardness of equal value in similar 'tools' such as mandibles. This question has direct bearing on the significance of metal hardening. In the present article, we compare across mandibles from six termite species, including samples with major zinc concentration, minor manganese, and no metals. Nanoindentation, electron microscopy, and electron microanalysis are used to assess metal concentration, form, and mechanical properties. The data demonstrate that termite mandibles lacking metals when fully developed have lower values for hardness and elastic modulus. Zinc is linked to a relative 20% increase in hardness when compared with mandibles devoid of metals. The similar transition metal, manganese, found in minor concentrations, is not linked to any significant increase in these mechanical properties. This raises the question of the function of manganese, which is as commonly found in insect mandibles as zinc and often located in the same mandibles.