能源富集区市域经济发展水平空间格局演变——基于晋陕蒙甘宁地区

采用熵权TOPSIS法对我国晋陕蒙甘宁这一典型能源富集区各地级以上城市的市域经济发展水平进行综合评价,进而使用马尔可夫转移概率分析方法和ESDA空间分析方法,探索该地区市域经济发展水平时空分异格局的演化特征,结果显示：（1）该地区的市域经济发展差距在波动中下降;（2）各等级城市在不同时期演化规律截然相反,随时间推移,除低等级之外的各等级城市均表现出较高的等级下降风险;（3）该地区城市的市域经济水平曾存在一定空间负相关,到2015年这种关系则不再显著;（4）该地区呈现以局部为核心区的格局,但西部地区明显趋冷;（5）市域经济系统整体处于耦合协调度较低的状态,发展不平衡、不协调的问题较突出。     

Investigating the bacterial community and amoebae population in rural domestic wastewater reclamation for irrigation

Reclamation of domestic wastewater for agricultural irrigation is viewed as a sustainable option to create an alternative water source and address water scarcity. Free-living amoebae(FLA), which are amphizoic protozoa, are widely distributed in various environmental sources. The FLA could cause considerable environmental and health risks. However, little information is available on the risk of these protozoa. In this study, we evaluated the feasibility using rural domestic wastewater for agricultural irrigation, and analyzed dynamic changes of the microbial community structure and FLA populations in raw and treated wastewater, as well as the phyllosphere and rhizosphere of lettuce production sites that were irrigated with different water sources. The bacterial community dynamics were analyzed by terminal restriction fragment length polymorphism(T-RFLP). The bacterial community structures in the influent were similar to that in the effluent, while in some cases relative abundances varied significantly. The populations of Acanthamoeba spp. and Hartmannella vermiformis in the anaerobically treated wastewater were significantly higher than in the raw wastewater. The vegetables could harbor diverse amoebae, and the abundances of Acanthamoeba spp. and H. vermiformis in the rhizosphere were significantly higher than in the phyllosphere. Accordingly, our studies show insight into the distribution and dissemination of amoebae in wastewater treatment and irrigation practices.     

反舰导弹命中精度预测与评估

目的解决反舰导弹命中精度受试验航区及靶场试验环境等客观条件制约,难以通过飞行试验得到客观全面评估的问题。方法在对影响反舰导弹命中精度的主要因素进行分析的基础上,利用实际环境条件下的飞行试验数据,构建基于偏最小二乘回归的命中精度模型,实现对反舰导弹各种使用环境条件命中精度的定量评估。结果在构建基于偏最小二乘回归的命中精度模型后,可以实现对90°发射扇面角、20 m/s侧风以及300 km最大射程等实际试验无法考核的边界使用环境条件下反舰导弹的命中精度进行定量评估。结论通过实例分析表明了方法的有效性和可行性,可以实现有小样本条件下对反舰导弹命中精度的评估。     

基于有限元分析的橡胶减振器优化设计

目的加快橡胶减振器的设计过程。方法分析橡胶材料及Mooney-Rivllin橡胶本构模型特点,介绍橡胶减振器应用特点及隔振设计的相关理论,采用Mooney-Rivllin模型模拟橡胶材料的力学特性,通过引进有限元优化技术,在设计初期保证减振器的刚度特性。结果在某设备减振设计中,采用单轴拉压曲线获取了橡胶材料的Mooney-Rivllin模型参数,以减振器的部分结构尺寸为设计参数,减振器的三向刚度为设计目标,获取了三轴向频率近似相等的隔振系统(轴向频率40 Hz、径向频率40.9 Hz)。通过试验测试,减振系统频率与试验值差别较小,其中轴向差别为2%,径向差别为1%。结论通过引进有限元优化技术,采用合理的橡胶本构模型,可以满足工程精度要求,加速了橡胶减振器的设计过程。     

Development and validation of methods for environmental monitoring of cyclophosphamide in workplaces

Methods to monitor contamination of workplaces with antineoplastic drugs have been developed and validated. Cyclophosphamide (CP) was used as a model compound as it is one of the most commonly used antineoplastic drugs. A wipe sampling method to detect contamination with CP at surfaces was developed. A personal air sampling method to sample gas and vapour on solid sorbent tubes and particles with filters was also developed. Wipe and filter samples were extracted and sorbent samples were eluted, all with ethyl acetate. The samples were analysed with liquid chromatography tandem mass spectrometry. (2)H(6)-labelled cyclophosphamide was used as an internal standard. The between-day precision was 2-5% for wipe samples, 4-6% for sorbent samples and 3-8% for filter samples. The limit of detection was 0.02 ng CP per sample for the wipe and filter methods and 0.03 ng CP per sample for the solid sorbent method. Wipe sampling on surfaces made of different materials resulted in mean recoveries between 78-106%. The desorption recovery was between 97-102% for the wipe samples, 97% for the sorbent samples and 101% for the filter samples. Samples were stable for up to 2 months at 5 degrees C and -20 degrees C and for about 2 d at room temperature. The developed methods were applied to the measurement of contamination with CP in a hospital pharmacy. Trace amounts of CP, 1.3 and 1.4 ng, were detected on surfaces in the pharmacy.     

高浓度印染废水处理工程工艺条件与实例分析

研究以三相生物流化床作为工程化反应器处理印染废水的工程工艺条件及操作特性，分别测定流化床内的气相含率，兴体循环速度及体积氧传质系数。     

项目环境影响评价与战略环境评价比较

结合国内外战略环境评价研究状况,对战略环境评价和项目环境影响评价的关系进行了较为全面地比较.通过分析项目环境影响评价的不足和战略环境评价的优点, 指出开展战略环境评价,可完善环境影响评价体系,促进可持续发展战略实施.并就战略环境评价与项目环境评价在研究对象、管理体系、技术特点、方法体系和技术手段等方面的区别作了明确阐述.最后分析了二者的联系,明确了二者的层次关系及可供借鉴之处.     

浅谈水泥生产中回转窑窑尾SO_2监测

窑尾监测SO_2时,有时会出现其浓度低于仪器最低检出限的情况,应根据窖尾类型、煤中硫含量大小,有无脱硫工艺等情况,认真对比、计算分析,以保证监测数据真实可靠。     

聚合物材料在快速原型制造技术中的应用

介绍聚合物材料作为成形原料在主要的快速原型制造(RPM)工艺中的应用情况。具体按照立体印刷成形(SLA)、层合实体制造(LOM)、选域激光烧结(SLS)及熔融沉积造型(FDM)这4种工艺的不同,阐述与各工艺对应的聚合物材料的种类、聚合物材料成形过程中可能出现的问题及解决方案。总结了聚合物材料原型的应用情况和聚合物材料在RPM技术应用中存在的问题。