Simulation of effects of atmospheric ethylene on tree leaf shedding

This study made a preliminary assessment of the possibility that ethylene contained in polluted atmospheres affects leaf shedding of trees. The effect of ethylene dosage (ppb x h) on leaf shedding at various temperatures was approximated by using a polynomial regression. The effect of ethylene dosage on shedding of tree leaves with various sensitivities to this hydrocarbon was simulated in connection with the relationship between ethylene concentrations (10-100 ppb), dosage periods (0-50 days) and temperature (10-30 degrees C). The simulated results indicated the possibility that, for the tree group having high sensitivity, the rate of leaf shedding due to a dosage of ethylene with a concentration as low as 20 ppb, which is commonly observed in urban atmospheres, increased with temperature. On the other hand, the same concentration scarcely influenced leaf shedding in the low sensitivity group even at a temperature as high as 30 degrees C. The results for the real atmosphere determined at the Tokyo metropolitan center indicated the possibility that, for trees having high sensitivity, the rate of leaf shedding increased with rises in both monthly ethylene concentrations and air temperatures and reached a maximum of 90% in July. But in December when the concentration again reached the same value as in July while the mean monthly air temperature was 9.3 degrees C, the rate was only 10%.     

Polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) and monobromo-polychlorinated dibenzo-p-dioxins/dibenzofurans (MoBPXDD/Fs) in the atmosphere and bulk deposition in Kyoto, Japan

Polybrominated diphenyl ethers (PBDEs), polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) and monobromo-polychlorinated dibenzo-p-dioxins/dibenzofurans (MoBPXDD/Fs) in atmosphere, bulk atmospheric deposition and soil in Kyoto, which is an urban city in Japan, were measured. Decabromodiphenyl ether (D(10)BDE, BDE-209) was detected in relatively high concentrations compared to other PBDE congeners in most samples. Similar results, in which D(10)BDE was predominantly detected, were reported in other studies in Japan. However, these homologue profiles differ from those of studies conducted in North America. The partitioning of semivolatile organic compounds between atmospheric gas phase and particulate-associated phase is an important factor in their environmental behavior. In this study, atmospheric particulate phase fraction (f(P)) of the brominated compounds increased with increasing bromine number, and f(P) was higher in samples collected in winter than in those collected in summer. Moreover, f(P) of PBDFs and MoBPXDFs was higher than that of PCDFs with the same halogen number. These results agree well with expectations from the vapor pressure of the brominated compounds and PCDD/Fs. Among the brominated compounds in the atmosphere, the level of MoBPXDD/Fs correlates positively with that of PCDD/Fs. This relationship has been previously observed in waste incineration samples. These results suggest that one of the sources of MoBPXDD/Fs in the atmosphere is incineration byproduct. The level of PBDD/Fs seems to correlate positively with that of PBDEs. This relationship suggest that the PBDD/Fs in the atmosphere relate to PBDEs, which is an impurity of PBDE products, or formed by the manufacture or combustion of plastics containing PBDEs.     

MIXING INDUCED BY AN INTERNAL HYDRAULIC JUMP1

ABSTRACT The efficiency of an inverted internal hydraulic jump as a mixing and dispersion mechanism in an aquatic environment was examined. The flow considered was a two-dimensional buoyant flow from a shallow channel over a sloping bottom into a deep reservoir. It could be seen that a rapidly varied flow associated with violent turbulent mixing occurred near the point of discharge if specific discharge conditions and downstream controls were met. Downstream from the mixing zone the flow was stably stratified. The main object of the study was to find the conditions under which a turbulent mixing zone occurred and the rate of turbulent entrainment. Energy loss and length of the mixing zone were also investigated. The independent variables were the outlet densimetric Froude number, the density differential between outfall water and receiving water, the relative depths of the upper and lower layers in the stratified flow portion, the total depth, and the slope of the transition. Theoretical calculations had to be confined to a step increase in depth, but experiments in a laboratory flume showed that results obtained with slopes of 23° and 90° were quite similar. Both theory and experiments showed, for example, that dilution (entrainment rates) up to 2:1 (2 parts heated water to one part cold water) can be achieved at very little energy expense and with downstream depths approximately 8 times the outlet depth. Theoretically, any amount of dilution can be obtained, but large depths may be required. Experimental results also indicate that the length of the mixing zone was frequently ten times the value of the outlet densimetric Froude number.     

Polychlorinated biphenyl (118) activates osteoclasts and induces bone resorption in goldfish

To analyze the effect of polychlorinated biphenyl (PCB) 118 on fish bone metabolism, we examined osteoclastic and osteoblastic activities, as well as plasma calcium levels, in the scales of PCB (118)-injected goldfish. In addition, effect of PCB (118) on osteoclasts and osteoblasts was investigated in vitro. Immature goldfish, in which the endogenous effects of sex steroids are negligible, were used. PCB (118) was solubilized in dimethyl sulfoxide at a concentration of 10 ppm. At 1 and 2 days after PCB (118) injection (100 ng/g body weight), both osteoclastic and osteoblastic activities, and plasma calcium levels were measured. In an in vitro study, then, both osteoclastic and osteoblastic activities as well as each marker mRNA expression were examined. At 2 days, scale osteoclastic activity in PCB (118)-injected goldfish increased significantly, while osteoblastic activity did not change significantly. Corresponding to osteoclastic activity, plasma calcium levels increased significantly at 2 days after PCB (118) administration. Osteoclastic activation also occurred in the marker enzyme activities and mRNA expressions in vitro. Thus, we conclude that PCB (118) disrupts bone metabolism in goldfish both in vivo and in vitro experiments.     

Effect of Snow Cover Conditions on the Hydrologic Regime: Case Study in a Pluvial‐Nival Watershed,Japan1

Abstract: Hydrologic monitoring in a small forested and mountainous headwater basin in Niigata Prefecture has been undertaken since 2000. An important characteristic of the basin is that the hydrologic regime contains pluvial elements year‐round, including rain‐on‐snow, in addition to spring snowmelt. We evaluated the effect of different snow cover conditions on the hydrologic regime by analyzing observed data in conjunction with model simulations of the snowpack. A degree‐day snow model is presented and applied to the study basin to enable estimation of the basin average snow water equivalent using air temperature at three representative elevations. Analysis of hydrological time series data and master recession curves showed that flow during the snowmelt season was generated by a combination of ground water flow having a recession constant of 0.018/day and diurnal melt water flow having a recession constant of 0.015/hour. Daily flows during the winter/snowmelt season showed greater persistence than daily flows during the warm season. The seasonal water balance indicated that the ratio of runoff to precipitation during the cold season (December to May) was about 90% every year. Seasonal snowpack plays an important role in defining the hydrologic regime, with winter precipitation and snowmelt runoff contributing about 65% of the annual runoff. The timing of the snowmelt season, indicated by the date of occurrence of the first significant snowmelt event, was correlated with the occurrence of low flow events. Model simulations showed that basin average snow water equivalent reached a peak around mid‐February to mid‐March, although further validation of the model is required at high elevation sites.     

Investing in safety an analytical precautionary principle

PROBLEM: Governments and businesses must respond to increasing safety requirements and balance the associated costs with productivity and competing pressures. METHOD: A real options approach has been introduced for decision making in the private sector; this approach is adapted for regulatory decisions that can involve irreversible and uncertain safety impacts, social costs that differ from private costs, and differences in perception among the stakeholders. RESULT AND IMPACT ON INDUSTRY AND GOVERNMENT: The outcome is an economic decision gage that determines if it is optimal to invest in safety even if the estimated costs significantly exceed the estimated benefits. Applications potentially include safety decisions related to aviation, ground transportation, pipelines, nuclear facilities, natural disaster planning, and terrorism, among others.     

Evaluation of environmentally friendly lubricant for aluminum cold forging using friction test based on spline extrusion

It is required to replace the aluminum fluoride coating, which is a popular lubricant for aluminum alloy cold forging in Japan, with environmentally friendly lubricants, because the aluminum fluoride coating has high environmental risks and needs much expense. Evaluations of lubrication performance are necessary before lubricant replacement. The authors proposed new friction test based on combined forward spline-backward can extrusion. It can realize large surface expansion, which is a characteristic of aluminum cold forging. In the present paper, a double-layer-type environmentally friendly solid lubricant film and the aluminum fluoride coating were applied to a precipitation hardened aluminum alloy. The lubrication performance was evaluated by the friction test. The double-layer-type lubricant showed superior performance enough for the replacement. The effect of surface treatment applied to workpiece on the lubrication performance was also investigated. The surface asperity generated by a wet-blasting showed high pickup resistance and low friction.     

Detection of Rotavirus Strains in Freshwater Clams in Japan

Bivalve molluscan shellfish like clams and oysters, etc., are capable to bioaccumulate surrounding contaminants from waters into their digestive systems and posing serious threats of food poisoning. Detection of rotaviruses (RVs) in shellfish is of particular importance because RVs are prone to genome reassortment resulting in the emergence of new RV variants that may compromise vaccine safety. Herein, we have detected the wild-type RVs and Rotarix/RotaTeq vaccine strains in freshwater clams collected on the riverside, Kawasaki city, from July 2019 to January 2020 and correlated the detected genotypes with that of gastroenteritis cases of nearby clinics to understand the transmission of RVs in the environment. The wild-type RVs were detected in 62 (64.6%) out of 96 freshwater clams in every study month: July, September, November, and January that are considered as off-season for RV infections. The most frequent genotypes were G2 (42.9%), G8 (28.6%), G3 (14.3%), G1 (7.1%), and G10 (7.1%), which remained comparable with genotypic distribution found in the clinical samples over the last few years indicating that these RVs may accumulate in clams since a long time. However, G10 genotype was detected in clam but not in clinical samples suggesting the presence of asymptomatic infection or RVs could be carried out from a long distance. Importantly, vaccine strains, RotaTeq (1%) but not Rotarix (0%), were also detected in a clam. Attention must be paid to monitoring the potential transmission of wild-type and vaccine RV strains in the environment to prevent the emergence of new variants generated from genome reassortment with vaccine strains.

     

Integrated biogeochemical modelling of nitrogen load from anthropogenic and natural sources in Japan

This study proposed an integrated biogeochemical modelling of nitrogen loads from anthropogenic and natural sources in Japan. Firstly, the nitrogen load (NL) from different sources such as crop, livestock, industrial plant, urban and rural resident was calculated by using datasets of fertilizer utilization, population distribution, land use map, and social census. Then, the nitrate leaching from soil layers in farmland, grassland and natural conditions was calculated by using a terrestrial nitrogen cycle model (TNCM). The Total Runoff Integrating Pathways (TRIP) was used to transport nitrogen from natural and anthropogenic sources through river channels, as well as collect and route nitrogen to the river mouths. The forcing meteorological and hydrological data is a 30-year (1976–2005) dataset for Japan which were obtained by the land surface model, Minimal Advanced Treatments of Surface Interaction and Runoff (MATSIRO). For the model validation, we collected total nitrogen (TN) concentration data from 59 rivers in Japan. As a comparison result, calculated TN concentration values were in good agreement with the observed ones, which shows the reliability of the proposed model. Finally, the TN loads from point and nonpoint sources were summarized and evaluated for 59 river basins in Japan. The proposed modelling framework can be used as a tool for quantitative evaluation of nitrogen load in terrestrial ecosystems at a national scale. The connection to land use and climate data provides a possibility to use this model for analysis of climate change and land use change impacts on hydrology and water quality.     

The effect of estimated PAR uncertainties on the physiological processes of biosphere models

Photosynthetically active radiation (PAR) energy reaching on the vegetated surface is a key determinant of plant physiological processes. Most of biosphere or crop models use the ratio of PAR to incoming solar radiation (R_s), PAR/R_s, to convert R_s into PAR in order to reduce weather data-input requirements. Several existing models simply specify a constant ratio, PAR/R_s = 0.5. However, some field experiments have reported that the ratio PAR/R_s may not be constant. Previous empirical equations of PAR/R_s were derived based on the data of monthly or daily timescales collected from only a few measurement sites, hence they may not be appropriate to be used in current global biosphere models usually with hourly simulation time steps. Here, we represent the exponential correlation between PAR/R_s and sky clearness index (0-1) using hourly data from 54 Ameriflux measurement sites. It is found that PAR/R_s increases up to 0.6 in cloudy conditions when the clearness index (CI) is below ∼0.2, whereas it is nearly constant at ∼0.42 when CI is above 0.2. When the identified empirical equation is used in the model simulation, it results in −4 to 2% difference in the stomatal conductance compared to that using the constant ratio PAR/R_s = 0.5.