Photovoltaic-thermal (PV/t) panel to minimize electrical and air conditioning energy consumption of a typical office in Beirut

A combined photovoltaic–thermal (PV/t) panel is proposed to produce simultaneously electricity and heat from one integrated unit. The unit utilizes effectively the solar energy through achieving higher PV electrical efficiency and using the thermal energy for heating applications. To predict the performance of the PV/t at a given environmental conditions, a transient mathematical model was developed. The model was integrated in a heating application for a typical office space in the city of Beirut to provide the office needs for electricity, heating during winter season, and dehumidification and evaporative cooling during the summer season. To minimize the yearly office energy (electrical and heat) needs, the PV/t panel cooling air flow rate and the dehumidification regeneration temperature were determined for opimal unit operation. Thermal energy savings of up to 85% in winter and 71% in summer were achived compared to conventional systems at a payback period of 8 years for the panels.     

Radiant Domestic Combustion Stove System: Experimental and Simulated Study of Energy Use and Thermal Comfort

A steady-state space radiant heat model and a stove combustion model are developed to simulate the heat exchanges between various surfaces in the room and the stove and stack surfaces, assuming stiochiometric combustion inside the stove and the exhaust gases flow out through the stack by natural convection. The space heat model calculates the fuel consumption, the stove, stack temperatures, and the mass flow rate of exhaust gases, and provides an opportunity to study the energy efficiency of the stove, while satisfying the constraints of thermal comfort. Fanger (1982) Fanger, P. O. 1982. Thermal Comfort Analysis and Applications in Engineering, 156–198. New York: McGraw Hill.  [Google Scholar] model and a radiation exchange model between various surfaces of the space, the thermal building energy balance, and stove combustion process is applied to determine the mean radiant temperature (MRT) and the extent of thermal comfort as determined by predicted mean vote (PMV).

The overall model is validated by performing experiments in a room placed inside a controlled outdoor environment. The room is heated using a domestic stove common for rural areas of Lebanon and the MRT, the room air temperature, the walls and window temperatures are measured at two stove positions. The measured MRT, the average room temperature, and the wall surface temperatures agreed within ±7% of values predicted by the numerical model.

A parametric study is performed to optimize the stove and occupant locations in the room where adequate comfort level can be maintained at lower fuel consumption levels. The values of MRT and PMV depend strongly on the position of the radiant stove heater and stack with respect to the cold window and the occupant location. It is shown that it is possible to save up to 15% in stove fuel consumption by changing the stove position in the room with respect to the window and to the person, while maintaining the same level of comfort.     

Portlandite wet-synthesis process from phosphogypsum waste using hydroxide medium: application in both CO2 capture and brine water salinity reduction

Journal of Material Cycles and Waste Management - Portlandite (Ca(OH)2) preparation from phosphogypsum waste (PGW) was evaluated in numerous works; however, the use of this compound is not applied...     

Motives of ethical consumption: a study of ethical products’ consumption in Tunisia

Environment, Development and Sustainability - Consuming ethical products has become a fundamental behavior for the protection of people’s lives and the environment, discussions on ethical...     

Effective and innovative procedures to use phosphogypsum waste in different application domains: review of the environmental,economic challenges and life cycle assessment

Journal of Material Cycles and Waste Management - Phosphogypsum (PG) waste is a by-product generated from wet-process phosphoric acid (H3PO4) manufacturing during phosphate rock...