A study of the elemental leachability and retention capability of compost

In this work a comparison is made between the different approaches that can be taken to evaluate the mobility of elements in compost. The practical consequences of the results obtained are also discussed in terms of methods for cleaning up compost and using compost in environmental remediation. The mobility of potentially toxic elements in compost is evaluated by leaching with four selected eluents, i.e. diluted sulfuric acid, oxalate, citrate and EDTA. In contrast to the chelating agents, diluted sulfuric acid was found to generally have a low leaching capability for removal of heavy metals from compost. This implies that the risk of heavy metal leaching caused by natural rainfall is likely to be low. The results obtained in the leaching experiment were compared with previous results obtained from sequential fractionation. This comparison confirmed that both methods gave similar results for predicting the lability of elements in compost. A non-linear regression analysis of the leaching curves was also conducted. The leaching curves for elements with high lability could be fitted with a two components model. The labile components identified by the kinetic model are approximately in accordance with the fractions obtained from the first step of the sequential extraction method. The kinetic speciation method is shown to be a relatively rapid and simple procedure for compost which gives more information about element lability than simple leaching experiments. The leaching reagents used in this work were not effective enough to be used for cleaning up compost with a high metal content. Compost was however shown to have a high affinity for heavy metals, with the order of affinity of metal for the compost being very similar to that seen for humic acid. Compost may therefore prove to be a good remediation material for metal contaminated waste.     

Particle size distribution of airborne Aspergillus fumigatus spores emitted from compost using membrane filtration

Information on the particle size distribution of bioaerosols emitted from open air composting operations is valuable in evaluating potential health impacts and is a requirement for improved dispersion simulation modelling. The membrane filter method was used to study the particle size distribution of Aspergillus fumigatus spores in air 50 m downwind of a green waste compost screening operation at a commercial facility. The highest concentrations (approximately 8 × 10⁴ CFU m⁻³) of culturable spores were found on filters with pore diameters in the range 1–2 μm which suggests that the majority of spores are emitted as single cells. The findings were compared to published data collected using an Andersen sampler. Results were significantly correlated (p < 0.01) indicating that the two methods are directly comparable across all particles sizes for Aspergillus spores.     

Kinetics of biochemically driven metal precipitation in synthetic landfill leachate

This study investigates the effectiveness of using metal sulphide and carbonate precipitation mechanisms combined with a landfill‐derived mixed bacterial population. The study was conducted under controlled substrate conditions in anaerobic batch reactors. High chemical oxygen demand (COD):sulphate ratios, butyrate, propionate, and acetate were used anaerobically by bacteria for growth with associated sulphate reduction as well as sulphide and carbonate generation. Propionate and butyrate degradation occurred during sulphate reduction by sulphate‐reducing bacteria while acetate degradation was associated with methanogenesis by methanogenic bacteria. Using low COD, sulphate ratios showed limited acetate utilization, but sulphate reduction still occurred. Precipitation of Cd, Cu, Zn, Ni, and Fe sulphides occurred quickly and was completed in 15 to 30 days, while Ca, Mn, and Mg carbonates formed after 40 to 50 days and some soluble metal remained even after 120 days. The rate of metal precipitation was in the order of Cd>Cu>Zn>Ni>Fe>Mn>Mg>Ca. Bacterially mediated metal precipitation occurred slower than that recognized for chemical precipitation. These findings suggest that contaminant transport models based on chemical equilibrium metal behaviors may over‐predict metal removal by bio‐precipitation. © 2002 Wiley Periodicals, Inc.     

WalkSafe: a school-based pedestrian safety intervention program

OBJECTIVE: To evaluate the effectiveness of the WalkSafe program, an elementary school-based pedestrian safety program in a single high-risk district in Miami-Dade County. METHODS: Sixteen elementary schools were identified in a single high-risk district and enrolled in a one-year study. All schools implemented the WalkSafe program on the last week of January 2003. A pre, post, and three-month post testing of pedestrian safety knowledge was conducted. An observational component was also implemented at four schools that were randomly chosen. Engineering recommendations and law enforcement initiatives were also performed. RESULTS: A total of 6467 children from K-5th grade from 16 elementary schools participated in the program. Of these 5762 tests were collected over three different testing times. A significant difference (p-value < 0.001) was found between the pre and post testing conditions across all grade levels. There was no significant difference found between the post and three-month post testing conditions across all grade levels (p-value > 0.05). The observational data collected at four schools across the different testing times demonstrated a significant difference found between pre and post testing conditions for Group A (stop at the curb and look left, right, left) and also for Group B (midstreet crossing and darting out) (p-value < 0.05). There was no difference found between comparing the pre-test or post-test condition with the three-month post-test time. There were many environmental modifications that were recommended and actually performed. CONCLUSION: The WalkSafe program implemented in a single high-risk district was shown to improve the pedestrian safety knowledge of elementary school children. The observational data demonstrated improved crossing behaviors from pre-test to post-testing conditions. Future research will focus on sustaining the program in this district and expanding the program throughout our county.     

Surface geophysical exploration: developing noninvasive tools to monitor past leaks around Hanford’s tank farms

A characterization program has been developed at Hanford to image past leaks in and around the underground storage tank facilities. The program is based on electrical resistivity, a geophysical technique that maps the distribution of electrical properties of the subsurface. The method was shown to be immediately successful in open areas devoid of underground metallic infrastructure, due to the large contrast in material properties between the highly saline waste and the dry sandy host environment. The results in these areas, confirmed by a limited number of boreholes, demonstrate a tendency for the lateral extent of the underground waste plume to remain within the approximate footprint of the disposal facility. In infrastructure-rich areas, such as tank farms, the conventional application of electrical resistivity using small point-source surface electrodes initially presented a challenge for the resistivity method. The method was then adapted to directly use the buried infrastructure, specifically the steel-cased wells that surround the tanks, as “long” electrodes for both transmission of electrical current and measurements of voltage. Overcoming the drawbacks of the long electrode method has been the focus of our work over the past 7 years. The drawbacks include low vertical resolution and limited lateral coverage. The lateral coverage issue has been improved by supplementing the long electrodes with surface electrodes in areas devoid of infrastructure. The vertical resolution has been increased by developing borehole electrode arrays that can fit within the small-diameter drive casing of a direct push rig. The evolution of the program has led to some exceptional advances in the application of geophysical methods, including logistical deployment of the technology in hazardous areas, development of parallel processing resistivity inversion algorithms, and adapting the processing tools to accommodate electrodes of all shapes and locations. The program is accompanied by a full set of quality assurance procedures that cover the layout of sensors, measurement strategies, and software enhancements while insuring the integrity of stored data. The data have been shown to be useful in identifying previously unknown contaminant sources and defining the footprint of precipitation recharge barriers to retard the movement of existing contamination.     

THE CANADIAN FLOOD DAMAGE REDUCTION PROGRAM

Ad hoc investments in structural flood control measures and continuing high disaster assistance payments by both senior levels of government have often failed to reduce the damage sustained due to floods in Canada. The national Hood Damage Reduction Program, undertaken by the federal government in conjunction with the provinces, has a new comprehensive approach. This joint program emphasizes the non-structural means of reducing flood damages over the long term but also allows for structural measures where these offer the best solution for existing development in the flood plain. The historical and constitutional context, the rationale and details of the program and its success to date are outlined.