The fly ash influenced the heavy metal status of the soil and the seeds of sunflower. A case study

In this study, four cultivars of sunflower (Helianthus annuus) were grown in the sandy loam soil, supplemented with graded (v/v) quantity (0, 20, 40, 60, 80, 100%) of the fly ash, released by the combustion of the coal from the thermal power plant. The presence of fly ash in the soil increased its porosity, water holding capacity, pH, E.C., C.E.C., the content of sulphate, carbonate, bicarbonate, chloride, phosphorus, potassium, calcium and various trace elements. However, in the seeds, except Fe, Pb, Mn and Zn, and other heavy metals remained untraced up to 40% of the fly ash, above that their quantity slightly increased but the values are very much under the permissible limits.     

Removal of Novacron Golden Yellow dye from aqueous solutions by low-cost agricultural waste: Batch and fixed bed study

The present work describes the removal of Novacron Golden Yellow (NGY) dye from aqueous solutions using peanut hulls. The experiments were performed with native, pretreated and immobilised forms of peanut hulls. The effect of various operational parameters (pH, biosorbent dose, initial dye concentration and temperature etc.) was explored during batch study. NGY showed maximum removal at low pH and low biosorbent dose. High initial dye concentration facilitated the biosorption process. Maximum dye removal with native, pretreated and immobilised biomass was found to be 35.7, 36.4 and 15.02 mg/g respectively. The experimental data were subjected to different kinetic and equilibrium models. The kinetic data confirmed the fitness of pseudo-second-order rate law for NGY biosorption. The equilibrium modelling was carried out by Freundlich, Langmuir and Temkin models. The isothermal data of NGY removal were best described by Freundlich adsorption isotherm. Negative values of Free energy change (Δ G⁰) for NGY with native and pretreated biomass depicted the spontaneous nature of biosorption process. In column mode, the effects of bed height, flow rate and initial dye concentrations were optimised. Maximum NGY biosorption (7.28 mg/g) was observed with high bed height, low flow rate and high initial concentration in continuous mode. Bohart–Adams model best fitted to the data obtained from column studies. The results indicated that the peanut hulls could be used effectively for the removal of dyes containing wastewater.     

Big data and predictive analytics to optimise social and environmental performance of Islamic banks

Environment Systems and Decisions - Regardless of known as environment-friendly entities, Islamic banks indirectly impact the environment through their clients’ engagement and slow response...     

Spatial analysis of drought severity and magnitude using the standardized precipitation index and streamflow drought index over the Upper Indus Basin,Pakistan

Environment, Development and Sustainability - Droughts are one of the multidimensional extreme events that negatively influence agriculture, water availability and food security in the World. The...     

The environmental impact of industrialization and foreign direct investment: empirical evidence from Asia-Pacific region

Environmental Science and Pollution Research - Environmental degradation has been the main distress in recent years due to the drastic effect of climate change. To determine the gone thorough...     

Assessment of physicochemical parameters of wastewater samples

Water samples from selected locations of Nullah Lai and Koh-e-Noor textile mill in the metropolitan city of Rawalpindi and Islamabad, Pakistan, were collected. Physicochemical parameters and heavy metals were determined using standard analytical procedures in comparison with sites, locations and subsequent interval of 3 months. The results of the physicochemical analysis at different locations of Nullah Lai and Koh-e-Noor textile mill with an interval of 3 months were obtained in the following range: pH (7.16–8.29), temperature (17.8–28.8 °C), conductivity (1,005–3,347 μS/m), TDS (754.3–2,519.5 mg/L), turbidity (272.8–487.05 NTU), total hardness (300–452 mg/L), nitrates (10.11–22.95 ppm), calcium (74.31–139.2 ppm), chloride (127.72–396.16 ppm), sulphate (15.97–87.38 ppm), NaCl (210.5–631.1 ppm), Ni (0.30–0.72 ppm), Cd (0.005–0.03 ppm), Cr (0.2–7.4 ppm), Pb (0.12–0.73 ppm), Zn (0.03–0.08 ppm) and Cu (0.01–0.06 ppm). The highest value of physicochemical parameters (compared with Nullah Lai) was obtained in locations of Koh-e-Noor textile mill. The results obtained exceeded the maximum allowable limit set by the World Health Organization for drinking purpose but can be used for irrigation purposes after suitable treatment and purification.     

Analysis of environmental degradation mechanism in the nexus among energy consumption and poverty in Pakistan

Environmental Science and Pollution Research - The study aims to analyze the mediating role of environmental degradation (ED) in the association between energy consumption (EC) and poverty (POV) in...     

Impact of mechanical deweeding on the phytophilous macroinvertebrate community of an eutrophic lake

The aim of the study was to estimate the impact of mechanical deweeding on the community structure of phytophilous macroinvertebrates. The eutrophic lake selected for the study was Dal Lake in the Kashmir Himalayas. The dissolved nutrient concentration was found to be highest in August and September, i.e., nitrates-nitrogen (513 μg l^?l) and total phosphorus (685 μg l^?l). During the period of investigation, a total of 22 macroinvertebrate taxa were recorded which belonged to phylum Arthropoda, Mollusca, and Annelida. The samples were collected with the help of a composite Gerking frame box and grappler. Mechanical deweeding had a profound impact on the population density of phylum Mollusca and Arthropoda followed by Annelida. However, family Tubificidae was not influenced by deweeding, as the harvester only trimmed the vegetation, and these organisms were recorded in the sediment of the lake. On average, the reference site had higher density of macroinvertebrates as compared to deweeded areas. The abundance of macroinvertebrates decreased from 200 ind. (individuals)?m^?2 in the reference site to 51 ind.?m^?2 in the deweeded site as a result of weed removal. Species richness and composition of major macroinvertebrates in harvested and unharvested areas of the lake were also dissimilar as portrayed by biotic indices vis-à-vis Shannon diversity index, evenness index, and Simpson index.     

The management of Industry 4.0 technologies and environmental assets for optimal performance of industrial firms in Malaysia

Environmental Science and Pollution Research - The integration of Industry 4.0 (I4.0) has emerged as an innovative paradigm for industrial firms contemplating environmental and economic issues....