Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

延迟焦化装置含硫污水减量化实践

在分析160×10~4t/a延迟焦化装置含硫污水来源及减量化潜力基础上,通过采取优化加热炉注汽量、调整焦炭塔吹汽量、降低分馏塔汽提蒸汽量、回用含硫污水汽提净化水等管理和技术措施,装置节约了蒸汽消耗,源头减少了含硫污水产生量,增加了含硫污水汽提净化水回用量,年经济效益达460万元。     

特别排放限值对石化企业发电锅炉达标排放的影响分析

根据环境保护部新发布的《关于执行大气污染物特别排放限值的公告》和GB13223-2011,结合重点地区石化企业燃煤发电锅炉的大气污染物排放情况,从脱硫、脱硝、除尘、脱汞4个方面对特别排放限值实施后可能对企业环保达标产生的影响进行了分析,并提出对策建议。     

脱水污泥制备含炭吸附剂及其应用研究

采用热解炭化法、物理活化法、化学活化法制备污泥含炭吸附剂,通过静态吸附实验研究各种影响污泥含炭吸附剂吸附性能的因素.实验结果表明,采用化学活化法制得的污泥含炭吸附剂吸附性能最好,在以ZnCl2为活化剂、锯末添加剂投加量为脱水污泥质量的1%、ZnCl2为3 mol/L、活化温度为450 ℃、活化时间为1.5 h、固液质量比(干污泥与活化剂溶液的质量比)为1:4的最佳制备条件下,制得的污泥含炭吸附剂碘吸附值在520 mg/g以上,产物收率>60%,比表面积>230 m2/g,总孔容积为0.35 mL/g,其中微孔容积为0.08 mL/g,中孔容积为0.23 mL/g.利用其处理城市污水,其对COD、色度、TP的去除率好于选定的商品颗粒活性炭.     

单芯铜线过电流故障电弧熔痕的微观特征研究*

为准确认定电气火灾中过电流故障,模拟4~7倍额定电流（Ie）条件下单芯铜导线过电流故障,利用光学显微镜和扫描电子显微镜（SEM）分析过电流故障电弧熔痕的组织特征,并结合Image-Pro Plus软件测定晶粒直径、周长和面积,探究金相组织的量化判据和变化规律。结果表明:当I＝4Ie时,过电流故障电弧熔痕的金相组织主要为方向性较强的树枝晶;当I＝5Ie,6Ie时,金相组织内树枝晶占比减小,胞状晶占比升高;当I＝7Ie时,方向性较弱的胞状晶占主导。随着电流增加,晶粒的平均直径、周长和面积均呈增长趋势。通过火灾案例分析可知,实验结果与现场的电弧熔痕组织特征基本相符,验证火灾事故原因为过电流故障。     

地震波斜入射下土质边坡的稳定性分析*

地震诱发的边坡失稳是重要的地质灾害类型之一,数值方法是对地震边坡进行分析的一项重要工具。基于黏弹性人工边界,通过将地震记录转化为等效地震荷载实现地震波在场地中的施加;并采用Mohr?Coulomb准则模拟土体的非线性特征。根据非线性有限元软件ABAQUS,建立了双面边坡的数值模型,通过分析地震波在不同角度入射下不同坡角边坡的地震响应,讨论了地震波入射角以及边坡坡角对破坏的影响。结果表明,地震波入射角和边坡形状改变了地震波在坡体内的传播规律,因此影响了边坡的破坏。随着地震波入射角的增加,靠近波源一侧坡面的滑动位移和滑动区域逐渐增加,而远离波源一侧的滑动位移和滑动区域逐渐减小。边坡坡度的增加引起坡面危害的逐渐加剧。本文讨论了不同尺寸边坡在不同地震作用下的破坏规律,从而为地震诱发边坡的失稳破坏提供了理论支撑,具有重要的现实工程意义。     

有机磷阻燃剂的环境暴露与动物毒性效应

有机磷阻燃剂(OPFRs)逐渐替代了危害较大的多溴联苯醚(PBDEs),因此使得人类及其他生物更易暴露于这种有机物中。有研究表明,部分有机磷酸酯具有致癌性,因而使人们对其毒性的问题也日益关注。本文概述了有机磷阻燃剂的环境暴露水平,总结了近年来从体外与体内实验2个方面动物毒性效应的研究。目前研究发现诸多地区的大气、土壤和水体中的有机磷阻燃剂总含量水平相对较低;仅高浓度暴露才会对不同动物体造成一定程度的损伤,而远大于环境浓度的低浓度暴露几乎无损伤效应。最后,对有机磷阻燃剂毒性效应的未来研究重点进行了展望。     

Risk assessment of heavy metals in road and soil dusts within PM2.5, PM10 and PM100 fractions in Dongying city, Shandong Province, China

15 road and 14 soil dust samples were collected from an oilfield city, Dongying, from 11/2009-4/2010 and analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) for V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb within PM(2.5), PM(10) and PM(100) fractions synchronously. Metal concentrations, sources and human health risk were studied. Results showed that both soil and road dust exhibited higher values for Mn and Zn and lower values for Co and Cd for the three fractions. Mass concentration ratios of PM(2.5)/PM(10) and PM(10)/PM(100) for metals in road and soil dust indicate that most of the heavy metals tend to concentrate in fine particles. Geoaccumulation index and enrichment factors analysis showed that Cu, Zn and Cd exhibited moderate or heavy contamination and significant enrichment, indicating the influence of anthropogenic sources. Vanadium, Cr, Mn and Co were mostly not enriched and were mainly influenced by crustal sources. For Ni, As and Pb, they ranged from not enriched to moderately enriched and were influenced by both crustal materials and anthropogenic sources. The conclusions were confirmed by multivariate analysis methods. Principle component analysis revealed that the major sources were vehicle emission, industrial activities, coal combustion, agricultural activities and crustal materials. The risk assessment results indicated that metal ingestion appeared to be the main exposure route followed by dermal contact. The most likely cause for cancer and other health risks are both the fine particles of soil and road dusts.     

Surface clogging process modeling of suspended solids during urban stormwater aquifer recharge

Aquifer recharge,which uses urban stormwater,is an effective technique to control the negative effects of groundwater overexploitation,while clogging problems in infiltration systems remain the key restricting factor in broadening its practice.Quantitative understanding of the clogging process is still very poor.A laboratory study was conducted to understand surface physical clogging processes,with the primary aim of developing a model for predicting suspended solid clogging processes before aquifer recharge projects start.The experiments investigated the clogging characteristics of different suspended solid sizes in recharge water by using a series of one-dimensional fine quartz sand columns.The results showed that the smaller the suspended particles in recharge water,the farther the distance of movement and the larger the scope of clogging in porous media.Clogging extents in fine sand were 1 cm,for suspended particle size ranging from 0.075 to 0.0385 mm,and 2 cm,for particles less than 0.0385 mm.In addition,clogging development occurred more rapidly for smaller suspended solid particles.It took 48,42,and 36 hr respectively,for large-,medium-,and small-sized particles to reach pre-determined clogging standards.An empirical formula and iteration model for the surface clogging evolution process were derived.The verification results obtained from stormwater recharge into fine sand demonstrated that the model could reflect the real laws of the surface clogging process.