Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

How does population structure affect pollutant discharge in China? Evidence from an improved STIRPAT model

Environmental Science and Pollution Research - China is the most populous country in the world, and the pollution caused by the excessive population should not be underestimated. In recent years,...     

大兴安岭西坡中生代火山岩形成机制

依据火山喷发特点、火山岩岩石组合及火山岩的同位素年代学证据,大兴安岭西坡地区发育的大量中生代火山岩可分为三个放回,自早而晚依次为：晚侏罗世的塔木兰沟族回、上库力旋回和早白垩世的伊列克得旋回。不同旋回火山岩具有不同的地质、地球化学特征。在岩浆起源、源区性质和演化过程等方面,不同族回火山岩既有相似之处,也存在明显差别。火山岩为深部作用和过程的产物,对其形成机制的研究,有助于理解本区中生代发生的剧烈的火山岩浆作用和成矿作用的构造背景及演化过程。     

海37引信回转体座冷挤压工艺

回转体座是海37引信中的关键件,要求有一定的机械强度、耐磨性.研制期间,曾用压铸铝合金,由于铝合金压铸内部存在着气孔,表面粗糙.不能满足其机械性能的要求.针对这一现象,研制了回转体座冷挤压成形工艺,零件表面质量好,成本低,满足了产品的机械性能要求.     

“赛力奇”的致突变性研究

选用Ａｍｅｓ试验、小鼠骨髓细胞微核实验和小鼠显性致死突变试验对新型食品添加剂“赛力奇”的致突变性进行了检验。结果表明：三项试验的结果均生。根据国家《食品安全性毒理学评价程序（试行）》的规定，认为“赛力奇”无致突变性。     

基于环境的交通网络流分配模型

通过对车辆尾气排放的观察 ,建立了一个基于环境的固定需求用户均衡网络流分配模型。并用EXCEL求解了一具体算例。运用模型可以在满足交通需求的情况下 ,使车辆对环境的污染减少到最低限度     

发展理论与环境保护

从２０世纪发展研究的进展中，阐述了发展的含义，二战后发展理论学。分析了２０世纪５０掉代的发展观－经济增长论，不可持续发的经济畸增的生产与消费模式使生态环境和自然资源遭到严重破坏，人类生存与发展面临严峻挑战，重点阐明 了合理利用自然资源地球环境的发展观－可持续发展理诊及其对策思路，     

低温高铁锰氨氮地下水两级生物净化快速启动

为了实现东北地区低温（5~6℃）高铁、锰、氨氮（TFe：9~15mg/L，Fe²⁺：6~12mg/L，NH₃-N：1.4~2.0mg/L，Mn²⁺：1.4~2.0mg/L）地下水的净化及解决同层净化中运行稳定性差、出水锰超标的问题，在水厂净化车间开展“两级曝气+两级过滤”工艺启动研究，采用差滤速和同滤速2种启动方式分别启动两级生物净化工艺.结果表明，2种启动方式分别在106，59d启动成功.同滤速启动可以有效的缩短两级生物净化的启动时间，铁、锰、氨氮去除负荷可达110.69，18.80，19.54g/（m²·h），沿程分析发现，铁在一级滤柱的60cm处即被去除至痕量；85.08%的氨氮在一级滤柱中去除，沿程各段去除均匀，14.92%的氨氮在二级滤柱中去除；锰的去除率和氧化活性去除区位受滤速及进水氨氮浓度影响较大，33.72%的锰在一级滤柱中去除，66.28%的锰在二级滤柱中去除，锰的去除仍然是滤池成熟的决定性因素.     

开式冷挤压成形深小锥孔件时极限变形程度的理论研究

给出了深小锥孔件开式冷挤压成形时极限变形程度的定义,建立了变形区非稳态连续速度场;利用上限原理得到了极限变形程度的理论判据。分析了各主要参数对极限变形程度的影响规律,对指导制定深小锥孔件开式冷挤压成形工艺具有重要意义。