基于关联性及趋势性分析的AVHRR NDVI及#br# MODIS NDVI数据产品比较

针对AVHRR NDVI和MODIS NDVI数据集中不同数据产品间的差异和区域适应性问题，利用2003~2013年重叠时间段MODIS Terra/Aqua的NDVI Collection 5(C5)和Collection 6(C6)产品以及AVHRR NDVI中的GIMMS NDVI3g产品，选择汉江流域典型区域进行数据对比分析。通过关联指数IOAs(Index of Association)来评价各数据在季节波动上的一致性；采用Mann Kendall检验分析各数据的长期趋势差异。结果表明，在季节性变化上，同一卫星不同版本产品之间的关联性相对较高。在年际变化上，GIMMS产品相对MODIS 产品，仅能检出部分NDVI变化趋势。在地表覆被异质性相对较高地区，GIMMS产品的长期变化趋势检出率较低。MODIS Terra的NDVI C5产品受传感器退化影响，表现出相对较高的减少趋势。 关键词： GIMMS NDVI；MODIS NDVI；Mann Kendall检验；趋势分析     

碘化阶层孔氧化硅纳米球对水中典型有机氯污染物的吸附性能研究

采用共缩聚法,成功地原位合成了碘改性的阶层多孔氧化硅纳米球（SiO₂-I）,研究了其基于卤键作用对典型有机氯污染物六六六的吸附性能,并考察了改性剂I-硅烷含量和pH值对吸附效果的影响.实验结果表明,该纳米材料对六六六表现出优异的吸附富集性能,吸附速率快,60 min内对六六六的去除率为71.6%,240 min内达到吸附平衡,去除率可达98.3%,最大吸附量为178.6 mg·g^-1;吸附动力学符合拟二级动力学模型;碘物种的加入提高了阶层多孔氧化硅的吸附速率和吸附效率.另外,为了便于纳米吸附材料的分离,本研究对SiO₂-I纳米球进行了磁性化.研究发现,磁性化修饰后,SiO₂-I纳米材料仍然保留对六六六优异的吸附富集性能,240 min时的吸附去除率达90.3%.     

能源富集区市域经济发展水平空间格局演变——基于晋陕蒙甘宁地区

采用熵权TOPSIS法对我国晋陕蒙甘宁这一典型能源富集区各地级以上城市的市域经济发展水平进行综合评价,进而使用马尔可夫转移概率分析方法和ESDA空间分析方法,探索该地区市域经济发展水平时空分异格局的演化特征,结果显示：（1）该地区的市域经济发展差距在波动中下降;（2）各等级城市在不同时期演化规律截然相反,随时间推移,除低等级之外的各等级城市均表现出较高的等级下降风险;（3）该地区城市的市域经济水平曾存在一定空间负相关,到2015年这种关系则不再显著;（4）该地区呈现以局部为核心区的格局,但西部地区明显趋冷;（5）市域经济系统整体处于耦合协调度较低的状态,发展不平衡、不协调的问题较突出。     

生物基聚合物PHBV和PLA复合材料在不同介质中的生物降解及其影响因素

传统工艺的塑料生产不仅依赖石油资源的持续开发利用,同时给环境造成了前所未有的压力,近年来生物基聚合物（聚（3-羟基-3-戊酸酯）-PHBV,聚乳酸-PLA）日渐成为传统石油基塑料的替代产品.本文采用呼吸测试手段,旨在揭示均质复合材料在不同环境介质（土壤、熟化堆肥、水体）条件下及有机添加剂（木质素）,无机添加剂（蒙脱石）和天然有机物链增长剂（Joncryl）作用下的生物降解特征.结果表明：当链增长剂Joncryl添加量为5%时,对所有介质PHBV和PLA复合材料产生显著抑制作用.Joncryl添加量为0.2%时,未对所测样品的生物降解行为产生干扰作用.在熟化堆肥介质中,PLA复合材料比PHBV基质混合物的生物降解速率明显降低.有机木质纤维添加剂（榛子壳粉末）单独在聚合物中添加或者和链增长剂Joncryl以及非有机添加剂（Dellite72T）共同作用下都可促进PLA聚合物中各组分的相容连接性.实验结果表明,新型添加剂在不同介质中以二元或三元添加的方式对生物降解过程产生重要影响,该研究将为新型材料使用后的生物降解效应提供理论依据.     

Investigating the bacterial community and amoebae population in rural domestic wastewater reclamation for irrigation

Reclamation of domestic wastewater for agricultural irrigation is viewed as a sustainable option to create an alternative water source and address water scarcity. Free-living amoebae(FLA), which are amphizoic protozoa, are widely distributed in various environmental sources. The FLA could cause considerable environmental and health risks. However, little information is available on the risk of these protozoa. In this study, we evaluated the feasibility using rural domestic wastewater for agricultural irrigation, and analyzed dynamic changes of the microbial community structure and FLA populations in raw and treated wastewater, as well as the phyllosphere and rhizosphere of lettuce production sites that were irrigated with different water sources. The bacterial community dynamics were analyzed by terminal restriction fragment length polymorphism(T-RFLP). The bacterial community structures in the influent were similar to that in the effluent, while in some cases relative abundances varied significantly. The populations of Acanthamoeba spp. and Hartmannella vermiformis in the anaerobically treated wastewater were significantly higher than in the raw wastewater. The vegetables could harbor diverse amoebae, and the abundances of Acanthamoeba spp. and H. vermiformis in the rhizosphere were significantly higher than in the phyllosphere. Accordingly, our studies show insight into the distribution and dissemination of amoebae in wastewater treatment and irrigation practices.     

反舰导弹命中精度预测与评估

目的解决反舰导弹命中精度受试验航区及靶场试验环境等客观条件制约,难以通过飞行试验得到客观全面评估的问题。方法在对影响反舰导弹命中精度的主要因素进行分析的基础上,利用实际环境条件下的飞行试验数据,构建基于偏最小二乘回归的命中精度模型,实现对反舰导弹各种使用环境条件命中精度的定量评估。结果在构建基于偏最小二乘回归的命中精度模型后,可以实现对90°发射扇面角、20 m/s侧风以及300 km最大射程等实际试验无法考核的边界使用环境条件下反舰导弹的命中精度进行定量评估。结论通过实例分析表明了方法的有效性和可行性,可以实现有小样本条件下对反舰导弹命中精度的评估。     

基于有限元分析的橡胶减振器优化设计

目的加快橡胶减振器的设计过程。方法分析橡胶材料及Mooney-Rivllin橡胶本构模型特点,介绍橡胶减振器应用特点及隔振设计的相关理论,采用Mooney-Rivllin模型模拟橡胶材料的力学特性,通过引进有限元优化技术,在设计初期保证减振器的刚度特性。结果在某设备减振设计中,采用单轴拉压曲线获取了橡胶材料的Mooney-Rivllin模型参数,以减振器的部分结构尺寸为设计参数,减振器的三向刚度为设计目标,获取了三轴向频率近似相等的隔振系统(轴向频率40 Hz、径向频率40.9 Hz)。通过试验测试,减振系统频率与试验值差别较小,其中轴向差别为2%,径向差别为1%。结论通过引进有限元优化技术,采用合理的橡胶本构模型,可以满足工程精度要求,加速了橡胶减振器的设计过程。     

Development and validation of methods for environmental monitoring of cyclophosphamide in workplaces

Methods to monitor contamination of workplaces with antineoplastic drugs have been developed and validated. Cyclophosphamide (CP) was used as a model compound as it is one of the most commonly used antineoplastic drugs. A wipe sampling method to detect contamination with CP at surfaces was developed. A personal air sampling method to sample gas and vapour on solid sorbent tubes and particles with filters was also developed. Wipe and filter samples were extracted and sorbent samples were eluted, all with ethyl acetate. The samples were analysed with liquid chromatography tandem mass spectrometry. (2)H(6)-labelled cyclophosphamide was used as an internal standard. The between-day precision was 2-5% for wipe samples, 4-6% for sorbent samples and 3-8% for filter samples. The limit of detection was 0.02 ng CP per sample for the wipe and filter methods and 0.03 ng CP per sample for the solid sorbent method. Wipe sampling on surfaces made of different materials resulted in mean recoveries between 78-106%. The desorption recovery was between 97-102% for the wipe samples, 97% for the sorbent samples and 101% for the filter samples. Samples were stable for up to 2 months at 5 degrees C and -20 degrees C and for about 2 d at room temperature. The developed methods were applied to the measurement of contamination with CP in a hospital pharmacy. Trace amounts of CP, 1.3 and 1.4 ng, were detected on surfaces in the pharmacy.