Regulated emission characteristics of in-use LNG and diesel semi-trailer towing vehicles under real driving conditions using PEMS

On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH_4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH_4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.     

北京市清洁汽车可持续发展战略与对策研究

在分析北京市清洁车行动实施现状的基础上，提出了北京市清洁汽车行动的基本原则与可持续发展战略及对策。     

State of research on the automation of HAZOP studies

For more than 30 years, multiple research groups have worked on the automation of hazard and operability (HAZOP) studies, or more specifically on the hazard identification process. So far, very few of these approaches have been used in the chemical process industry. Automatic hazard identification is a knowledge-intensive process that demands high standards with regard to the way in which knowledge is stored and made available. There are various suitable approaches to the qualitative modeling of processes and plants, which are the foundation for reasoning systems that are used for the identification of hazards. Additionally, there are quantitative methods that are based on process simulations and can be used to identify potential hazards. The investigation of the state of research demonstrates that there are sophisticated technologies for automated systems that include powerful reasoning techniques. The benefits and shortcomings of existing technologies are discussed with regard to their industrial applicability. Often, the quality of the necessary specific and generic knowledge is not sufficient to detect potential hazardous events and operational malfunctions. Computer-aided HAZOP systems should be integrated with computer-aided design- or process simulation software using common data models based on the digital representation of the process plant. In order to be used by HAZOP practitioners automated systems need to be comprehensive, serve as specialized decision support systems, and be tested and evaluated using round robin tests.     

中国国道和省道机动车尾气排放特征

近年来,随着我国机动车保有量的持续增长,机动车排放已成为我国重要的大气污染物来源之一.现有的机动车排放研究多关注城市内的机动车大气污染物排放,针对城市间的大气污染物排放研究较少.我国城市间交通道路主要包括国道和省道,截止至2015年我国国道里程18.53万km、省道里程32.97万km,约占全国等级公路总里程的13%,因此开展我国国道和省道机动车大气污染物排放研究十分重要.本研究基于全国国道和省道交通监测站的年均监测数据,采用环境保护部发布的《道路机动车大气污染物排放清单编制技术指南(试行)》中的指导方法,计算了2015年我国国道和省道机动车的大气污染物排放清单,分析了污染物排放的时空分布特征.结果表明,我国国道和省道公路机动车排放的一氧化碳(CO)、氮氧化物(NO_x)、颗粒物(PM)和碳氢化合物(HC)排放量分别占全国机动车污染物总排放量的4.5%、27.9%、14.4%和7.7%;不同车型对国道和省道机动车大气污染物排放的分担率不同,其中大货车是NO_x、PM_(10)、PM_(2.5)的主要来源,摩托车是CO和HC的主要来源;不同道路类型中各车型的大气污染物排放分担率也不同,如高速路上大货车是NO_x、PM_(10)和PM_(2.5)的主要来源,普通道路上大客车和大货车是NO_x、PM_(10)和PM_(2.5)的主要来源.     

柴油车尾气颗粒物排放现状评价

对2013年哈尔滨市不同供油方式的柴油车排气细颗粒物或黑碳测量参数—光吸收系数进行了统计分析,结果表明:涡轮增压和自然吸气供油方式光吸收系数均值分别为1.39 m-1和1.27 m-1,超标率分别为5.8%和2.4%,采用颗粒物控制措施及排气装置强制维护降低了颗粒物排放,符合排放标准。     

Perceptions of safety on a shared road: Driving,cycling, or walking near an autonomous vehicle

Introduction: While improved safety is a highly cited potential benefit of autonomous vehicles (AVs), at the same time a frequently cited concern is the new safety challenges that AVs introduce. The literature lacks a rigorous exploration of the safety perceptions of road users who will interact with AVs, including vulnerable road users. Addressing this gap is essential because the successful integration of AVs into transportation systems hinges on an understanding of how all road users will react to their presence. Methods: A stated preference survey of the Phoenix, Arizona, metropolitan statistical area (Phoenix MSA) was conducted in July 2018. A series of ordered probit models was estimated to analyze the survey responses and identify differences between various population groups with respect to the perceived safety of driving, cycling, and walking near AVs. Results: Greater exposure to and awareness of AVs are not uniformly associated with increases in perceived safety. Various attitudinal factors, level of AV automation, and other intrinsic and extrinsic factors are related to safety perceptions of driving, walking, and cycling near AVs. Socioeconomic and demographic characteristics, such as gender, age, income, employment, and automobile usage and ownership, have various relationships with perceived safety. Conclusions: Cycling near an AV was perceived as the least safe activity, followed by walking and then driving near an AV. Both similarities and differences were observed among the factors associated with the perceived safety of different travel alternatives. Practical Applications: Public perception will guide the development and adoption of AVs directly and indirectly. To help maintain control of public perception, transportation planners, decision makers, and other stakeholders should consider more deliberate and targeted messaging to address the concerns of different road users. In addition, more careful pilot testing and more direct attention to vulnerable road users may help avoid a backlash that could delay the rollout of this technology.     

Passenger distractions among adolescent drivers

PROBLEM: Adolescents who drive with peers are known to have a higher risk of crashes. While passengers may distract drivers, little is known about the circumstances of these distractions among teen drivers. METHOD: This study used survey data on driving among 2,144 California high school seniors to examine distractions caused by passengers. RESULTS: Overall, 38.4% of youths who drove reported having been distracted by a passenger. Distractions were more commonly reported among girls and students attending moderate- to high-income schools. Talking or yelling was the most commonly reported type of distraction. About 7.5% of distractions reported were deliberate, such as hitting or tickling the driver or attempting to use the vehicle's controls. Driving after alcohol use and having had a crash as a driver were both significant predictors of reporting passenger-related distraction. CONCLUSION: Adolescents often experience distractions related to passengers, and in some cases these distractions are intentional. IMPACT ON INDUSTRY: These results provide information about teenage drivers who are distracted by passenger behaviors. In some cases, passengers attempted to use vehicle controls; however, it seems unlikely that this behavior is common enough to warrant redesign of controls to make them less accessible to passengers.     

闭环电控三元催化技术对化油器型车辆排放的控制

针对城市汽车尾气治理及化油器型车辆的排放现状 ,指出开发和运用闭环电控三元催化技术是目前解决城市化油器型车辆排放问题及时可行的过渡措施 ,并对电控三元催化技术的应用提出了建议与要求。     

克拉玛依市机动车污染现状调查与防治对策研究

在调查克拉玛依市机动车尾气污染的基础上,分析存在的问题,并针对性地提出城市交通污染的控制对策.     

CFD Prediction of Air Quality in the Area between Two City Vehicular Tunnels Considering Moving Cars

Concentration fields of different pollutants that spread outside two roadtunnels predicted with a CFD code will be presented. The solution domain represents the city area located between two tunnel outlets – tunnel Strahov and tunnel Mrazovka in Prague. The vicinity of both tunnels is a heavily built up area with tall buildings forming typical street canyons. The CFD modelling predicts the situation after the tunnel Mrazovka will be finished and traffic will increase considerably between both tunnels. Namely, an interest was given to the prediction of dispersion of emissions leaving both tunnel and the area touched by the traffic. For the CFD predictions, a method previously developed for moving vehicles was used. The method uses combination of Eulerian and Lagrangian approaches to moving objects and is capable of modeling different speeds and traffic rates of cars as well as traffic-induced turbulence. Influence of several meteorological parameters was studied, namely wind speed and direction and traffic parameters, like traffic rates and speed of cars. The method separates contributions from different sources to the total concentration field, namely from background, tunnel outlet and roadway. Results are presented in the form of horizontal and vertical concentration fields of NO_x.