A hybrid model for human factor analysis in process accidents: FBN-HFACS

Human factors are the largest contributing factors to unsafe operation of the chemical process systems. Conventional methods of human factor assessment are often static, unable to deal with data and model uncertainty, and to consider independencies among failure modes. To overcome the above limitations, this paper presents a hybrid dynamic human factor model considering Human Factor Analysis and Classification System (HFACS), intuitionistic fuzzy set theory, and Bayesian network. The model is tested on accident scenarios which have occurred in a hot tapping operation of a natural gas pipeline. The results demonstrate that poor occupational safety training, failure to implement risk management principles, and ignoring reporting unsafe conditions were the factors that contributed most failures causing accident. The potential risk-based safety measures for preventing similar accidents are discussed. The application of the model confirms its robustness in estimating impact rate (degree) of human factor induced failures, consideration of the conditional dependency, and a dynamic and flexible modelling structure.     

Particulate matter exchange between atmosphere and roads surfaces in urban areas

The deposition and the re-suspension of particulate matter (PM) in urban areas are the key processes that contribute not only to stormwater pollution, but also to air pollution. However, investigation of the deposition and the re-suspension of PM is challenging because of the difficulties in distinguishing between the resuspended and the deposited PM. This study created two Bayesian Networks (BN) models to explore the deposition and the re-suspension of PM as well as the important influential factors. The outcomes of BN modelling revealed that deposition and re-suspension of PM10 occurred under both, high-traffic and low-traffic conditions, and the re-suspension of PM2.5 occurred under low-traffic conditions. The deposition of PM10 under low-volume traffic condition is 1.6 times higher than under high-volume traffic condition, which is attributed to the decrease in PM10 caused by relatively higher turbulence under high-volume traffic conditions. PM10 is more easily resuspended from road surfaces compared to PM2.5 as the particles which larger than the thickness of the laminar airflow over the road surface are more easily removed from road surfaces. The increase in wind speed contributes to the increase in PM build-up by transporting particulates from roadside areas to the road surfaces and the airborne PM2.5 and PM10 increases with the increase in relative humidity. The study outcomes provide a step improvement in the understanding of the transfer processes of PM2.5 and PM10 between atmosphere and urban road surfaces, which in turn will contribute to the effective design of mitigation measures for urban stormwater and air pollution.     

Sex‐specific and dose‐response relationships of urinary cobalt and molybdenum levels with glucose levels and insulin resistance in U.S. adults

Growing studies have linked metal exposure to diabetes risk. However, these studies had inconsistent results. We used a multiple linear regression model to investigate the sex-specific and dose-response associations between urinary metals (cobalt (Co) and molybdenum (Mo)) and diabetes-related indicators (fasting plasma glucose (FPG), hemoglobin A1c (HbA1c), homeostasis model assessment for insulin resistance (HOMA-IR), and insulin) in a cross-sectional study based on the United States National Health and Nutrition Examination Survey. The urinary metal concentrations of 1423 eligible individuals were stratified on the basis of the quartile distribution. Our results showed that the urinary Co level in males at the fourth quartile (Q4) was strongly correlated with increased FPG (β = 0.61, 95% CI: 0.17–1.04), HbA1c (β = 0.31, 95% CI: 0.09–0.54), insulin (β = 8.18, 95% CI: 2.84–13.52), and HOMA–IR (β = 3.42, 95% CI: 1.40–5.44) when compared with first quartile (Q1). High urinary Mo levels (Q4 vs. Q1) were associated with elevated FPG (β = 0.46, 95% CI: 0.17–0.75) and HbA1c (β = 0.27, 95% CI: 0.11–0.42) in the overall population. Positive linear dose-response associations were observed between urinary Co and insulin (P_nonlinear = 0.513) and HOMA–IR (P_nonlinear = 0.736) in males, as well as a positive linear dose-response relationship between urinary Mo and FPG (P_nonlinear = 0.826) and HbA1c (P_nonlinear = 0.376) in the overall population. Significant sex-specific and dose-response relationships were observed between urinary metals (Co and Mo) and diabetes-related indicators, and the potential mechanisms should be further investigated.     

Application of Bayesian regularized BP neural network model for analysis of aquatic ecological data-A case study of chlorophyll-a prediction in Nanzui water area of Dongting Lake

Bayesian regularized BP neural network（BRBPNN） technique was applied in the chlorophyll-α prediction of Nanzui water area in Dongting Lake. Through BP network interpolation method, the input and output samples of the network were obtained. After the selection of input variables using stepwise/multiple linear regression method in SPSS i1.0 software, the BRBPNN model was established between chlorophyll-α and environmental parameters, biological parameters. The achieved optimal network structure was 3-11-1 with the correlation coefficients and the mean square errors for the training set and the test set as 0.999 and 0.000？8426, 0.981 and 0.0216 respectively. The sum of square weights between each input neuron and the hidden layer of optimal BRBPNN models of different structures indicated that the effect of individual input parameter on chlorophyll- α declined in the order of alga amount 〉 secchi disc depth（SD） 〉 electrical conductivity （EC）. Additionally, it also demonstrated that the contributions of these three factors were the maximal for the change of chlorophyll-α concentration, total phosphorus（TP） and total nitrogen（TN） were the minimal. All the results showed that BRBPNN model was capable of automated regularization parameter selection and thus it may ensure the excellent generation ability and robustness. Thus, this study laid the foundation for the application of BRBPNN model in the analysis of aquatic ecological data（chlorophyll-α prediction） and the explanation about the effective eutrophication treatment measures for Nanzui water area in Dongting Lake.     

综合预应力与陀螺效应的TLJ500土工离心机模态分析

目的 分析获得离心机运转时各综合效应对其模态频率的影响.方法 从理论上推导结构在无离心场时,仅考虑预应力刚化效应和仅考虑旋转软化效应与综合考虑各效应时结构固有频率之间的关系.建立TLJ500土工离心机静止状态及运转状态的有限元模型,并根据TLJ500静止状态的模态试验结果对有限元模型中主轴轴承部位的材料参数进行修正识别,获得可信度更高的模型.再将修正识别得到的主轴轴承参数代入离心机运转状态的有限元模型,开展离心机运转状态的模态分析,结合理论分析结果,计算得到综合考虑预应力刚化效应与旋转软化效应时离心机关心模态频率的结果.结果 运转状态TLJ500离心机关心模态频率计算结果与试验结果比较一致.结论 仿真结果验证了文中方法的可行性,为离心机临界转速设计提供了一种可信的数值模拟预测方法.     

TEMPORAL CHANGES IN THE YADKIN RIVER FLOW VERSUS SUSPENDED SEDIMENT CONCENTRATION RELATIONSHIP1

ABSTRACT: Dynamic linear models (DLM) and seasonal trend decomposition (STL) using local regression, or LOESS, were used to analyze the 50‐year time series of suspended sediment concentrations for the Yadkin River, measured at the U.S. Geological Survey station at Yadkin College, North Carolina. A DLM with constant trend, seasonality, and a log₁₀ streamflow regressor provided the best model to predict monthly mean log₁₀ suspended sediment concentrations, based on the forecast log likelihood. Using DLM, there was evidence (odds approximately 69:1) that the log₁₀ streamflow versus log₁₀ suspended sediment concentration relationship has changed, with an approximate 20 percent increase in the log₁₀ streamflow coefficient over the period 1981 to 1996. However, sediment concentrations in the Yadkin River have decreased during the decade of the 1990s, which has been accompanied by a concomitant increase in streamflow variability. Although STL has been shown to be a versatile trend analysis technique, DLM is shown to be more suitable for discovery and inference of structural changes (trends) in the model coefficient describing the relationship between flow and sediment concentration.     

Using long-term data for a reintroduced population to empirically estimate future consequences of inbreeding

Inbreeding depression is an important long-term threat to reintroduced populations. However, the strength of inbreeding depression is difficult to estimate in wild populations because pedigree data are inevitably incomplete and because good data are needed on survival and reproduction. Predicting future population consequences is especially difficult because this also requires projecting future inbreeding levels and their impacts on long-term population dynamics, which are subject to many uncertainties. We illustrate how such projections can be derived through Bayesian state-space modeling methods based on a 26-year data set for North Island Robins (Petroica longipes) reintroduced to Tiritiri Matangi Island in 1992. We used pedigree data to model increases in the average inbreeding level (F ) over time based on kinship of possible breeding pairs and to estimate empirically N_e/N (effective/census population size). We used multiple imputation to model the unknown components of inbreeding coefficients, which allowed us to estimate effects of inbreeding on survival for all 1458 birds in the data set while modeling density dependence and environmental stochasticity. This modeling indicated that inbreeding reduced juvenile survival (1.83 lethal equivalents [SE 0.81]) and may have reduced subsequent adult survival (0.44 lethal equivalents [0.81]) but had no apparent effect on numbers of fledglings produced. Average inbreeding level increased to 0.10 (SE 0.001) as the population grew from 33 (0.3) to 160 (6) individuals over the 25 years, giving a ratio of 0.56 (0.01). Based on a model that also incorporated habitat regeneration, the population was projected to reach a maximum of 331–1144 birds (median 726) in 2130, then to begin a slow decline. Without inbreeding, the population would be expected stabilize at 887–1465 birds (median 1131). Such analysis, therefore, makes it possible to empirically derive the information needed for rational decisions about inbreeding management while accounting for multiple sources of uncertainty.     

Tracking a half century of media reporting on gray wolves

Natural resource and wildlife managers must balance the disparate priorities of a diversity of stakeholders. To manage these priorities, a firm understanding of topics salient to the public is needed. The media often report on issues of importance to the public; therefore, these reports may be a useful measure of public interest. However, efficient methods for distinguishing diverse topics related to a wildlife management issue reported in the media and changes in the salience of those topics have been lacking. We used latent Dirichlet allocation, a Bayesian mixture model, to quantitatively assess the salience of topics surrounding the gray wolf (Canis lupus), which was reintroduced to Idaho (U.S.A.) in 1995. We analyzed articles published from 1960 to 2015 in an Idaho newspaper. We identified 6 distinct topics associated with gray wolves: policy, hunting, biological status, implementation of management, recovery, and human-wolf conflict. The salience of topics pre- and postreintroduction of wolves (1995) and pre- and postdelisting of wolves from the U.S. Endangered Species Act (2009) differed significantly, underscoring that these events were turning points in how issues were being publicly discussed and framed. Articles written by the local reporters were more likely to report on topics regarding conflict between humans and wolves, whereas articles sourced from a national outlet reported more on topics pertaining to wolf policy and biological status. In the context of managing a contentious, far-ranging, and long-lived wildlife species, our methods can help guide the location and timing of a suite of management strategies (e.g., media relation plans and stakeholder engagement) that promote human-wildlife coexistence across different landscapes.     

Fault detection and diagnostics of a three-phase separator

A high demand of oil products on daily basis requires oil processing plants to work with maximum efficiency. Oil, water and gas separation in a three-phase separator is one of the first operations that are performed after crude oil is extracted from an oil well. Failure of the components of the separator introduces the potential hazard of flammable materials being released into the environment. This can escalate to a fire or explosion. Such failures can also cause downtime for the oil processing plant since the separation process is essential to oil production. Fault detection and diagnostics techniques used in the oil and gas industry are typically threshold based alarm techniques. Observing the sensor readings solely allows only a late detection of faults on the separator which is a big deficiency of such a technique, since it causes the oil and gas processing plants to shut down.A fault detection and diagnostics methodology for three-phase separators based on Bayesian Belief Networks (BBN) is presented in this paper. The BBN models the propagation of oil, water and gas through the different sections of the separator and the interactions between component failure modes and process variables, such as level or flow monitored by sensors installed on the separator. The paper will report on the results of the study, when the BBNs are used to detect single and multiple failures, using sensor readings from a simulation model. The results indicated that the fault detection and diagnostics model was able to detect inconsistencies in sensor readings and link them to corresponding failure modes when single or multiple failures were present in the separator.     

Using a Bayesian network to clarify areas requiring research in a host–pathogen system

Bayesian network analyses can be used to interactively change the strength of effect of variables in a model to explore complex relationships in new ways. In doing so, they allow one to identify influential nodes that are not well studied empirically so that future research can be prioritized. We identified relationships in host and pathogen biology to examine disease‐driven declines of amphibians associated with amphibian chytrid fungus (Batrachochytrium dendrobatidis). We constructed a Bayesian network consisting of behavioral, genetic, physiological, and environmental variables that influence disease and used them to predict host population trends. We varied the impacts of specific variables in the model to reveal factors with the most influence on host population trend. The behavior of the nodes (the way in which the variables probabilistically responded to changes in states of the parents, which are the nodes or variables that directly influenced them in the graphical model) was consistent with published results. The frog population had a 49% probability of decline when all states were set at their original values, and this probability increased when body temperatures were cold, the immune system was not suppressing infection, and the ambient environment was conducive to growth of B. dendrobatidis. These findings suggest the construction of our model reflected the complex relationships characteristic of host–pathogen interactions. Changes to climatic variables alone did not strongly influence the probability of population decline, which suggests that climate interacts with other factors such as the capacity of the frog immune system to suppress disease. Changes to the adaptive immune system and disease reservoirs had a large effect on the population trend, but there was little empirical information available for model construction. Our model inputs can be used as a base to examine other systems, and our results show that such analyses are useful tools for reviewing existing literature, identifying links poorly supported by evidence, and understanding complexities in emerging infectious‐disease systems.