Combined influence of food level and inoculation density on competition between <Emphasis Type="Italic">Anuraeopsis fissa</Emphasis> and <Emphasis Type="Italic">Brachionus patulus</Emphasis> or <Emphasis Type="Italic">Brachionus macracanthus</Emphasis> (Rotifera: Brachionidae)

We tested separately the effect of two taxonomically related rotifers (B. patulus and B. macracanthus) on the population dynamics of another species (A. fissa) at low (0.5 ×10 ⁶) and high food levels (1.5 × 10⁶ cells/ml of Chlorella vulgaris) using different inoculation densities (0–100%). We also quantified the impact of A. fissa on the two brachionid species. Regardless of the presence of the competing species, an increase in the availability of food led to increase in the abundances of the three rotifers. The population growth of B. patulus, B. macracanthus, or A. fissa was affected negatively when cultured together with another species. An increase in the initial density of any one of the competing species became advantageous to maintain a certain population size. At a low algal food level, B. patulus was able to suppress A. fissa more strongly than B. macracanthus. On the other hand, at a high food level, B. macracanthus suppressed the population of A. fissa more strongly than B. patulus. Peak population densities for A. fissa varied from about 150 to 1000 ind./ml, depending on food density and the presence of competitors. The rate of population increase (r) of A. fissa, B. patulus, and B. macracanthus increased with an increase in food availability but decreased with increasing initial density of the competitor. Both Brachionus spp. experienced negative growth rates in the presence of A. fissa, especially at a high initial density of the latter. Published in Russian in Ekologiya, 2007, Vol. 38, No. 5, pp. 381–390. The article was submitted by the authors in English.     

海洋现代沉积速率~（210）Pb－~（210）Bi法的射线测定研究

本文主要介绍了用~（２１０）Ｐｂ─~（２１０）Ｂｉ法测定海洋现代沉积速率和数据处理方法的研究。该方法测定的结果与~（２１０）Ｐｂ─~（２１０）Ｐｏ法和阴离子交换－ＥＤＴＡ纯化－硫酸钡镭沉淀－α计数法（简称~（２２６）Ｒａ法）以及厦门大学海洋系经研究改进的分离、纯化~（２１０）Ｐｂ的离子交换法的测定结果相当吻合。     

The study for polyaromatic hydrocarbons decay on Chinese coal soot particles in atmosphere

A study for the photochemical behavior of some polyaromatic hydrocarbons (PAH), for example B(a )P, B( k )F and fluoranthene in coal smoke particles was performed by using indoor Teflon smog chamber.Experiments suggest that the photochemical reaction of PAH is first order reaction and kinetic rates of some PAH were obtained. It was shown that the reaction rate constant is proportional to light intensity and water vapor concentration. Temperature and PAH loading also have influence on PAH decay rate. A model for PAH loss has been set up on the basis of the results of our experiments and the simulating results of this model suggest that coal particle PAH half lives are of the order of a period of days in winter and a few hours in summer. Other factors which may have effect on the photochemical reaction of PAH have also been discussed.     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

NATURAL EROSION RATES AND THEIR PREDICTION IN THE IDAHO BATHOLITH1

ABSTRACT: Natural rates of surface erosion on forested granitic soils in central Idaho were measured in 40 m² bordered erosion plots over a period of four years. In addition, we measured a variety of site variables, soil properties, and summer rainstorm intensities in order to relate erosion rates to site attributes. Median winter erosion rates are approximately twice summer period rates, however mean summer rates are nearly twice winter rates because of infrequent high erosion caused by summer rainstorms. Regression equation models and regression tree models were constructed to explore relationships between erosion and factors that control erosion rates. Ground cover is the single factor that has the greatest influence on erosion rates during both summer and winter periods. Rainstorm intensity (erosivity index) strongly influences summer erosion rates, even on soils with high ground cover percentages. Few summer storms were of sufficient duration and intensity to cause rilling on the plots, and the data set was too small to elucidate differences in rill vs. interrill erosion. The regression tree models are relatively less biased than the regression equations developed, and explained 70 and 84 percent of the variability in summer and winter erosion rates, respectively.     

How certain are we about the certainty-equivalent long term social discount rate?

Theoretical arguments for using a term structure of social discount rates (SDR) that declines with the time horizon have influenced government guidelines in the US and Europe. The certainty equivalent discount rate that often underpins this guidance embodies uncertainty in the primitives of the SDR, such as growth. For distant time horizons the probability distributions of these primitives are ambiguous and the certainty equivalent itself is uncertain. Yet, if a limited set of characteristics of the unknown probability distributions can be agreed upon, ‘sharp’ upper and lower bounds can be defined for the certainty-equivalent SDR. Unfortunately, even with considerable agreement on these features, these bounds are widely spread for horizons beyond 75 years. So while estimates of the present value of intergenerational impacts, including the social cost of carbon, can be bounded in the presence of this ambiguity, they typically remain so imprecise as to provide little practical guidance.     

高碳氮负荷下同时脱氮除碳好氧颗粒污泥研究

在4 L反应器中,以补加葡萄糖和硫酸铵的猪场废水为基质,不接种活性污泥,加入粉末状活性炭对废水土著微生物进行预固定.通过批次进水并控制运行条件（逐渐提高COD、NH 4＋-N负荷、缩短沉降时间、提高曝气量）培养同时脱氮除碳好氧颗粒污泥,研究了该好氧颗粒污泥的脱氮除碳功能及对高碳氮负荷冲击的响应.结果表明,成熟好氧颗粒污泥为土黄色不规则球状,粒径为0.5～3.5 mm.COD和NH 4＋-N负荷分别在4.80～12.6 kg.（m3.d）-1和0.217～0.503 kg.（m3.d）-1时,好氧颗粒污泥对COD的去除率〉94%,对NH 4＋-N的去除率〉98%.当COD和NH 4＋-N负荷分别提高至15.70 kg.（m3.d）-1和0.723kg.（m3.d）-1并运行4 d后,反应器内絮体激增,颗粒沉降变差并开始破碎,NH 4＋-N去除率下降至81.6%.排出部分污泥并降低负荷继续运行,颗粒污泥的NH 4＋-N去除率可迅速恢复至98%以上.本研究培养的好氧颗粒污泥具有良好的同时脱氮除碳功能,可以耐受高COD和NH 4＋-N负荷的双重冲击.     

Choice of teenagers' vehicles and views on vehicle safety: survey of parents of novice teenage drivers

Objective

To examine parental decisions about vehicles driven by teenagers and parental knowledge of vehicle safety.

Methods

About 300 parents were interviewed during spring 2006 in Minnesota, North Carolina, and Rhode Island while teenagers took their first on-road driving tests.

Results

Fewer than half of parents surveyed said teenagers would be the primary drivers of the chosen vehicles. Parents most often cited safety, existing family vehicle, and reliability when explaining the choices for their teenagers’ vehicles. About half of the vehicles intended for teenagers were small/mini/sports cars, pickups, or SUVs — vehicles considered less safe for teenagers than midsize/large cars or minivans. A large majority of vehicles were 2001 models or earlier. Vehicles purchased in anticipation of adding a new driver to the family were more likely to be the sizes/types considered less safe than vehicles already owned. Few parents insisted on side airbags or electronic stability control, despite strong evidence of their safety benefits. Even when asked to identify ideal vehicles for their teenagers to drive, about half of parents identified less safe vehicle sizes/types. Most parents knew that midsize/large vehicles are safer than small vehicles, and at least half of parents said SUVs and pickups are not safe for teenage drivers, citing instability.

Conclusions

The majority of parents understood some of the important criteria for choosing safe vehicles for their teenagers. However, parents actually selected many vehicles for teenagers that provide inferior crash protection.

Impact on industry

Vehicle safety varies substantially by vehicle size, type, and safety features. Many teenagers are driving inferior vehicles in terms of crashworthiness and crash avoidance.     

Why are powered two wheeler riders still fatally injured in road junction crashes? – A causation analysis

Introduction: Powered Two Wheeler (PTW) crashes continue to be a road safety concern with a plateauing of the number of associated fatalities. Method: Forty one UK fatal or serious injury crashes involving a PTW and another vehicle at a junction were examined. Crash causation was analysed using the Driver Reliability and Error Analysis Method (DREAMv3.2). Crashes were split into two groups: Group A, where the other vehicle was travelling in the opposite direction to the PTW and commenced a right turn across the PTW’s path; and Group B where the other vehicle turned right out of a side road (or entrance) across the PTW’s path. Results: Overall, the factor that led directly to the crash (phenotype) was most commonly ‘too high speed’ or ‘too late action’ for the motorcyclist and ‘too early action’ for the other driver. Missed or late observations were contributory factors for both PTW riders and other vehicle drivers. Some differences between groups were observed with the PTW riders in Group B more likely to have ‘insufficient skills’ and the other vehicle drivers in Group A more likely to have ‘attention allocation’ as a causation factor. For both groups the crashes occurred because the other vehicle failed to give way to the PTW with causation chains that suggest ‘looked but failed to see’ is still an issue in this type of crash. The excessive speed of the PTW contributed to some crashes. Conclusions: This analysis suggests that drivers failing to give way to PTW riders at junctions is still a problem. This may relate to the ‘looked but did not see’ phenomenon. Causation differences were observed between the examined groups. Practical considerations: The DREAM methodology is an effective tool in analysing crash data from police collision investigation reports. Different countermeasures may be necessary to prevent different types of junction crashes.     

Field effectiveness evaluation of advanced driver assistance systems

Abstract

Objective: Advanced driver assistance systems (ADAS) are a class of vehicle technologies designed to increase safety by providing drivers with timely warnings and autonomously intervening to avoid hazardous situations. Though laboratory testing suggests that ADAS technologies will greatly impact crash involvement rates, real-world evidence that characterizes their effectiveness is still limited. This study evaluates and quantifies the association of ADAS technologies with the likelihood of a moderate or severe crash for new-model BMWs in the United States.

Methods: Vehicle ADAS option information for the cohort of model year 2014 and later BMW passenger vehicles sold after January 1, 2014 (n?=?1,063,503), was coded using VIN-identified options data. ADAS technologies of interest include frontal collision warning with autonomous emergency braking, lane departure warning, and blind spot detection. BMW Automated Crash Notification system data (from January 2014 to November 2017) were merged with vehicle data by VIN to identify crashed vehicles (n?=?15,507), including date, crash severity (delta V), and area of impact. Using Cox proportional hazards regression modeling, the study calculates the adjusted hazard ratio for crashing among BMW passenger vehicles with versus without ADAS technologies. The adjusted percentage reduction in moderate and severe crashes associated with ADAS is interpreted as one minus the hazard ratio.

Results: Vehicles equipped with both autonomous emergency braking and lane departure warning were 23% less likely to crash than those not equipped (hazard ratio [HR]?=?0.77; 95% confidence interval [CI], 0.73–0.81), controlling for model year, vehicle size and body type. Autonomous emergency braking and lane departure warning generally occur together, making it difficult to tease apart their individual effects. Blind spot detection was associated with a 14% reduction in crashes after controlling for the presence of autonomous emergency braking and lane departure warning (HR =0.86; 95% CI, 0.744–0.99). Differences were observed by vehicle type and crash type. The combined effect of autonomous emergency braking and lane departure warning was greater in newer model vehicles: Equipped vehicles were 13% less likely to crash (HR =0.87; 95% CI, 0.79–0.95) among 2014 model year vehicles versus 34% less likely to crash (HR =0.66; 95% CI, 0.57–0.77) among 2017 model year vehicles.

Conclusion: This robust cohort study contributes to the growing evidence on the effectiveness of ADAS technologies.