广东省地方污染物排放标准的特点

介绍了广东省地方污染物排放标准中的《水污染物排放限值》和《大气污染物排放限值》的主要特点 ,对今后标准修订提出了建议     

无机痕量分析中预富集技术的应用现状及前景

综述了预富集技术在无机痕量分析中的应用，概述了国内外最新进展，介绍了主要技术及方法的特点，大量文献表明预富集技术用于痕量分析取得满意的效果，降低了检测限，提高了灵敏度。     

The use of amniotic fluid AFP action limits in diagnosing open neural tube defects

An analysis is made of alphafetoprotein (AFP) concentrations in 3630 amniotic fluids submitted for prospective prenatal diagnoses over a 7-year period. There were 89 cases of anencephaly, 74 of open spina bifida and 3467 with normal singleton outcomes. The AFP data were expressed in both standard deviations above the mean and multiples of the normal median for individual weeks of gestation. False positive and false negative rates were comparable in the two systems at selected cut-offs. It is concluded that either system may be used in setting action limits for the primary distinction of unaffected pregnancies from those in which an open neural tube defect is present.     

爆炸冲击波作用下靶板的塑性大变形响应研究

对四边约束方形靶板 ,在爆炸冲击波作用下的塑性大变形响应情况 ,进行了理论分析与试验研究。运用能量守恒的方法 ,同时考虑试验过程中靶板的边界约束条件 ,得到了四边约束方形靶板在爆炸冲击波作用下发生塑性大变形时挠度的半经验公式。理论计算与试验结果吻合性较好 ,这种方法可应用于板结构在爆炸冲击波作用下的毁伤或防护方面的工程预测     

THE INFLUENCE OF CLIMATE VARIATION ON THE ESTIMATION OF LOW FLOWS USED TO PROTECT WATER QUALITY: A NATIONWIDE ASSESSMENT1

ABSTRACT: Historical flow records are used to estimate the regulatory low flows that serve a key function in setting discharge permit limits through the National Pollutant Discharge Elimination System, which provides a nationwide mechanism for protecting water quality. Use of historical records creates an implicit connection between water quality protection and climate variability. The longer the record, the more likely the low flow estimate will be based on a broad set of climate conditions, and thus provides adequate water quality protection in the future. Unfortunately, a long record often is not available at a specific location. This analysis examines the connection between climate variability and the variability of biologically based and hydrologically based low flow estimates at 176 sites from the Hydro‐Climatic Data Network, a collection of stream gages identified by the USGS as relatively free of anthropogenic influences. Results show that a record of 10 to 20 years is necessary for satisfactory estimates of regulatory low flows. Although it is possible to estimate a biologically based low flow from a record of less than 10 years, these estimates are highly uncertain and incorporate a bias that undermines water quality protection.     

Flammability limits of binary mixtures of dimethyl ether with five diluent gases

Flammability limits of binary mixtures of dimethyl ether with five kinds of diluent gases were measured by ASHRAE method at room temperature. The five diluent gases are nitrogen, carbon dioxide, chlorodifluoromethane (HCFC-22), 1,1,1,2-tetrafluoroethane (HFC-134a) and 1,1,1,2,3,3,3-heptafluoropropane (HFC-227ea). The experimental results were correlated with the extended Le Chatelier's formula. It was found that the experimental results were well reproduced by the formula. In addition, flammability limits of binary mixtures of dimethyl ether with nitrogen and carbon dioxide were compared with the estimated values based on the adiabatic flame temperature method. The experimental results were found to be in satisfactory agreement with the estimated values.     

挥发性有机污染物排放控制标准制订中的关键技术问题研究

研究分析了挥发性有机污染物排放标准制订中4个关键技术问题:污染因子选择、控制指标确定、限值的确定以及技术管理措施.结果表明,应根据毒性和光化学反应性选择污染因子;确定控制指标应既考虑有组织控制指标,又考虑无组织的控制指标;确定排放限值应明确是基于控制技术还是基于健康风险;同时制定技术管理措施以通过源头和过程控制挥发性有机污染物排放.     

Development of chemically produced hydrogen energy-based impact bonding process for dissimilar metals

There has been a growing demand in the fabrication of dissimilar metal parts for application in the automotive, aerospace, defense, chemical and nuclear industries. Welding of dissimilar materials can be accomplished via impact welding, which can minimize the formation of a continuous inter-metallic phase, while chemically bonding dissimilar metals. This paper discusses an innovative technique for bonding dissimilar metals by chemically produced hydrogen energy by reacting aluminum powder and water. Experiments were carried out to study impact bond characteristics using copper and stainless steel cylindrical billets. The influence of nosed flyer billet angle and billet mass on bonding characteristics were studied. The test results have demonstrated that the nosed flyer billet angle has significant influence on wavy bond patterns at the interface. Among the three flyer billet nose angles of 9°, 12° and 15°, the billets with a flyer angle of 15° resulted in a complete wave morphological pattern along the whole sample cross-section. This study shows the potential of developing a cost effective system/machinery where discrete metal parts can be bonded at near net shape.     

Experimental investigation of the lower flammability limit of volatile liquid fuel-aluminum powder mixtures in air

Aluminum powder was always chosen as an additive to improve the explosive performance. In this work, experiments were performed to investigate the lower flammability limit (LFL) of volatile liquid fuel-aluminum powder mixtures using a 20 L closed spherical stainless steel vessel at a temperature of 20 °C (293 K) and 40 °C (313 K). The volatile liquid fuels tested in the work were diethyl ether (DEE), epoxypropane (PO), n-pentane and n-hexane. DEE, PO and n-pentane are in the liquid phase at room temperature and can easily transition to the gas phase at 40 °C (313 K). Through a series of experiments carried out, it was found that the change in phase would affect the interaction between the components. Aluminum powder always has an inhibitory effect on the flammability of the mixtures when it is mixed with gas-phase fuels. The inhibition effect was most obvious when the aluminum powder concentration reached 200 g/m³. While the interaction between aluminum powder and liquid-phase volatile fuels was promotion and was influenced by the component proportion and the type of the volatile fuels.     

Determination of 2,4- and 2,6-dinitrotoluene biodegradation limits

This study was carried out to explore the lowest achievable dinitrotoluene (DNT) isomer concentrations that would support sustained growth of DNT degrading microorganisms under an aerobic condition. Studies were conducted using suspended (chemostat) and attached growth (column) systems. The biodegradation limits for 2,4-dinitrotoluene chemostat and column system were 0.054 ± 0.005 and 0.057 ± 0.008 μM, respectively, and for 2,6-dinitrotoluene, the limits for chemostat and column system were 0.039 ± 0.005 and 0.026 ± 0.013 μM, respectively. The biodegradation limits determined in this study are much lower than the regulatory requirements, inferring that bacterial ability to metabolize DNT does not preclude applications of bioremediation (including natural attenuation) for DNT contaminated media.