达里诺尔湖水体DOM荧光特征及其来源解析

达里诺尔湖（简称“达里湖”）是内蒙古自治区高原地区重要的生态屏障,探究达里湖水质状况及污染来源,对加强流域水环境治理、改善水环境质量具有十分重要的意义.于2018年9月及2019年6月对湖水进行采样,并通过三维荧光光谱结合PARAFAC（平行因子分析）模型,探究达里湖水体DOM（溶解性有机质）来源及其与水质的关系.结果表明:①达里湖水体中pH较高,ρ（DOC）（DOC为溶解性有机碳）、ρ（NH₄+-N）、ρ（TP）相对较高,均超过GB 3838—2002《地表水环境质量标准》Ⅴ类水质标准限值.②水体中DOM含4种荧光组分.夏季水体DOM主要分布于河流入湖口附近,其中,类腐殖质荧光组分（紫外区类富里酸和可见区类富里酸）占总组分的62.93%,类蛋白类荧光组分（类色氨酸和类酪氨酸）占总组分的36.07%;秋季水体DOM主要分布于东南侧,其中,类腐殖质荧光组分占总组分的40.52%,类蛋白类荧光组分占总组分的59.48%.③达里湖采样点荧光参数表明,达里湖DOM自生源特征较强,腐殖化程度较低.类腐殖质荧光组分与ρ（DOC）、ρ（Chla）均呈正相关,类色氨酸荧光组分与pH呈正相关,类络氨酸与ρ（DTN）、ρ（NH4+-N）、ρ（DTP）均呈正相关.研究显示,达里湖DOM具有陆源与生物源双重特性,DOM的形成与微生物、细菌、浮游生物的生命活动密切相关.      

纳米涂层/铝合金在不同pH值的海水溶液中的腐蚀行为研究

目的评价纳米涂层/铝合金在不同pH值海水溶液中的腐蚀行为。方法通过测试纳米涂层/铝合金试样在不同pH值海水溶液中的EIS值,分析试样阻抗谱图及Bode谱图的演化规律,建立不同EIS图谱的不同电极阻抗模型,并采用ZView软件解析涂层体系不同时期的电化学阻抗谱,获得涂层电阻的变化趋势,及不同pH值海水浸泡的纳米涂层体系腐蚀失效速度。结果随着浸泡时间的增加及pH值的降低,纳米涂层/铝合金体系腐蚀损伤失效速率在浸泡前期整体趋势增大,但中后期由于腐蚀产物逐渐堵塞了涂层的微孔,腐蚀介质向铝合金表面渗透的速率逐渐减小。结论 pH为2.0海水浸泡下的3涂层失效最快,其次是pH为4.0海水浸泡下的2涂层,最后为p H为6.0海水浸泡下的1涂层,该涂层体系应采用等效电路模型C进行拟合。     

火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜

采用火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜。鱼内脏经组织捣碎机捣成匀浆后，加硝酸消解；底泥则经氢氟酸和高氯酸消化。该方法具有灵敏度高，精密度和回收率较好等特点。     

煤烟型大气污染解决方法

重点介绍了新型燃煤工艺——水平火焰无烟工业炉及其特点，并提出排烟尾气处理的资源化方案。     

国内氰化物测定法近况

阐述了近几年来国内氰化物的测定方法。方法包括:色谱法、光谱法、电化学法及其他方法。     

水中微量铝的间接原子吸收法测定

在ＨＡｃ－ＮａＡｃ缓冲溶液（ｐＨ４．５）体系中，利用（１－（２－萘酚（ＰＡＮ），Ａｌ＾３＾＋与Ｃｕ＾２＾＋－ＥＤＴＡ发生定量交换反应，用氯仿萃取出Ｃｕ＾２＾＋－ＰＡＮ，用原子吸收法测定水中的Ｃｕ＾２＾＋，以间接测定ＡＬ＾３＾＋。方法的最佳线性范围为０．１－１．０ｍｇ／Ｌ，最低检出浓度为０．１ｍｇ／Ｌ；测定河水，饮用水，地下水中的Ａｌ＾３＾＋，其回收率在８５．０％－１０９％之间，变异系数为１．５％－     

Prevention of gasoline vapor explosions in portable fuel containers

Portable Fuel Containers (PFCs) made for consumer use can, under unusual circumstances, develop a flammable atmosphere in the container headspace. In order to prevent an inadvertent ignition from causing flame propagation into this headspace and a subsequent explosion or flame jetting, PFC manufacturers are developing prototype Flame Mitigation Devices (FMDs) for installation in the PFC. A test method is described in this paper to determine if the installed FMD will indeed prevent flame entry into the PFC in a high-challenge flame propagation scenario. The method entails the use of a butane-air mixture ignited in a 5 cm diameter, 12 cm long tube attached to either the container neck or a spout on the container neck. Two concept FMD designs have successfully prevented repeated attempts at flame propagation into the PFC and have also produced encouraging results in tests for fuel flow restriction, duel dispensing nozzle friction, and prolonged fuel exposure. Versions of these tests are currently being promulgated in a draft ASTM standard on PFC FMDs.     

Experimental study on explosion inhibition by heptafluoropropane and its synergy with inert gas

The inhibition effect of heptafluoropropane (CF₃CHFCF₃) on methane explosions under different inhibitor concentrations in a closed vessel was studied. A high-speed camera and a pressure sensor were adopted respectively to record flame propagation characteristics and pressure data. Results indicate that the relationship between flame propagation and pressure rising was correlated. As the equivalent ratio (ϕ)≤1, the pressure presented a trend of rising firstly and then decreasing with increasing CF₃CHFCF₃ concentration, and it was found that there existed a critical concentration for pressure decrease. As ϕ > 1, the pressure exhibited a decreasing trend. Although the pressure appeared to seemingly increase, the moment that the pressure began to rise (t_rise) and the moment that the maximum explosion overpressure appeared (t_Pmax) were obviously delayed. The average rate of pressure rise ((dP/dt)_ave) was decreased as the concentration of CF3CHFCF3 increased. It indicates that CF₃CHFCF₃ can effectively reduce the explosion reaction rate. The critical concentration of CF₃CHFCF₃ for complete inhibition was determined. Meanwhile, the synergy of CF₃CHFCF₃-inert gas can improve the inhibition effect. Compared with CF₃CHFCF₃–N₂, the synergy of CF₃CHFCF₃–CO₂ presented a better inhibition effect, and the inhibition effect was increased with increasing inert gas concentration. And the mechanisms of physical and chemical effects on explosion inhibition were analyzed.     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.     

夏、冬季降雨中溶解性有机质(DOM)光谱特征及来源辨析

利用紫外-可见光谱与三维荧光光谱,结合拉格朗日混合单粒子轨道模型及火点图,研究了重庆2013年夏、冬两季雨水DOM光谱特征,并对其来源进行解析.结果表明,雨水DOM与水体、土壤DOM具有类似性质光谱特征,证明降雨DOM也是陆地及水环境中DOM地化特征的重要贡献者.雨水DOM中DOC含量为0.88~12.80 mg·L-1,CDOM含量在3.17~21.11m-1之间,夏、冬两季降雨DOM差异明显(P0.05).与夏季相比,冬季降雨DOM分子量较小,芳香性程度较低,腐殖化程度也更低,输入主要以本地和短距离输送为主;而夏季DOM来源较分散.尽管吸收和荧光光谱可用于解析雨水DOM组成和来源,但在光谱特征的解析和来源识别上与其他来源DOM有所区别,传统"内、外源区分"并不适用于雨水DOM.