煤烟型大气污染解决方法

重点介绍了新型燃煤工艺——水平火焰无烟工业炉及其特点，并提出排烟尾气处理的资源化方案。     

轻烧镁窑烟尘污染治理技术的筛选与应用

利用煤气发生炉生产煤气，烧结轻烧镁，具有产品质量高，大幅度削减烟尘排放量，节约能源等优点，该项技术具有广泛的推广价值，本文较详细地介绍了辽宁省轻烧镁窑烟尘污染治理技术的典型，具有同类技术的国内先进水平．     

火电厂低氮燃烧改造技术的应用

本文介绍了氮氧化物产生的机理以及低氮燃烧技术在火电厂大型燃煤锅炉的应用,简述其技术特点和改造措施,并通过试验测试了改造后的效果。     

加热炉设计中的环境噪声控制

对石化企业中加热炉的噪声生成进行了分析，介绍了噪声对装置环境的影响，在工程设计中对噪声控制     

石墨炉原子吸收法测定自来水中总铬升温参数的探讨

对石墨炉原子吸收测定自来水中总铬的方法进行优化。通过对石墨炉升温程序条件进行优化,找出其最佳参数值,其方法的线性关系良好,相关系数为0.999以上,回收率在96.7%~99.5%之间。该法操作简便,灵敏度和准确度高,线性好,便于推广,适合自来水中总铬的测定。     

微波消解-GFAAS法测定土壤中的总铅

研究了微波消解-GFAAS法测定土壤样品中总铅的方法。土壤样品加入HNO3+HF,经微波消解体系消解后,在恒温加热器上赶酸并除硅,石墨炉原子吸收光谱法(GFAAS)测定土壤样品中的总铅。测定数据经过与国标(GB/T 17141-1997)消解方法的比对,以及对不同土壤及土壤标准物质的测试。结果表明,两者无显著性差异,且此法重复性好,试剂用量少,安全易控制,结果可靠。     

微波高压络合消解石墨炉原子吸收分光光度法测定环境空气中锑

用有机滤膜采集空气中颗粒物样品,用微波高压络合消解后制成样品溶液。用石墨炉原子吸收分光光度法可确定样品溶液中锑的浓度。该方法具有对有机滤膜和样品消解完全,省时,无损失,灵敏度高,准确度、精密度好等特点。     

石墨炉原子吸收法快速测定水中的四乙基铅

用三氯甲烷萃取水中的四乙基铅,直接上石墨炉原子吸收仪进行测定。结果表明,方法相对标准偏差为5.9%,平均回收率在90.4%~108%之间,检出限为1.3×10-5mg/L。准确度高,精密度好。     

微波处理沥青烟气的探讨研究

采用响应曲面分析法,对微波处理沥青尾气时,管式炉加热温度、沥青烟预热温度及流量对处理沥青烟的影响进行了分析。结果表明:微波高温加热处理沥青烟气的方法,大大提高了焚烧法处理沥青尾气的效率,并且具有成本降低、设备简单、易于操作、易于控制、系统阻力较小、污染小等特点,这一工艺的提出,也为沥青烟气的处理方法开拓了新的道路。     

Formation and destruction of PCDD/F inside a grate furnace

Formation and destruction of polychlorinated dibenzo-p-dioxins and dibenzofurans PCDD/F during the combustion process was investigated experimentally in a pilot plant. All important process steps like the burnout of the fuel bed on the grate, the burnout of the flue gas inside the combustion chamber, the heat recovery in a boiler as well as influences of the fuel composition are described in detail.

High concentrations especially of PCDF are formed during the burnout of the fuel bed. The formation reaction is mainly influenced by the fuel composition and the burnout characteristic of the fuel bed. Fuels with low chlorine and low metal content (Cu) result only in negligible concentrations of PCDD/F.

Under stable combustion conditions characterized by an excellent flue gas burnout PCDD/F will almost be completely destroyed already inside the combustion chamber. “Cold strands” of unburned flue gas (high CO concentrations) caused by disturbed combustion conditions will result in high concentrations of PCDD and especially of PCDF in the raw gas.

A second place of PCDD/F formation is the well-known boiler section. Here fly ash deposits containing residual carbon (mainly soot particles) are the source for the formation reaction. Under stationary effective combustion conditions, they are dominant for PCDD/F concentrations in the raw gas over a very long period of time.

Stationary efficient flue gas burnout (especially soot) together with effective boiler cleaning will guaranty low concentrations of PCDD/F in the flue gas in front of the flue gas cleaning system.