铝型材挤压模具的失效分析

根据铝型材挤压模具的服役条件,采用宏观与微观相结合的分析方法,分析现场挤压模具的失效形式、失效性质和失效原因,并提出了提高模具使用寿命的一些措施.     

碟形封头冷旋压成形时的数值分析及旋压力计算

建立了碟形封头冷旋压的三维有限元数学模型 ,分析了封头在冷旋压成形过程中应力应变的分布规律 ,计算了旋压力并分析了其变化的原因 ,为更有效地进行旋压加工前的科学预测、工艺优化和进一步定量控制提供了可靠方法和依据     

导流板在生产性氧化沟中的应用

导流板是曝气转盘的附件。通过测试导流板设置前后对氧化沟流速分布和曝气机充氧能力的影响，分析了导流板在实际氧化沟中的应用效果，测试结果表明：导流板的设置提高了氧的转移效率，使转盘的充氧能力得以增加，改善氧化沟上部、底部流速分布。同时设置上下游导流板比只设置下游导流板效果更加明显。     

矿井提升机盘闸制动系统工作状态监控与安全

运用故障树分析(FTA)方法分析矿井提升机盘式制动系统故障原因,包括机械故障、摩擦系数故障、液压故障等,提出矿井提升机盘闸制动系统的故障树,并给出了系统状态计算机测控系统方案。采用现代检测与计算机技术,对盘闸制动系统的主要故障进行综合检测;对摩擦系数进行间接检测;研究成果,为故障报警与控制提供了保障,报警与控制结合,提高了提升机盘闸制动系统的安全性。     

A reflection on four impactful Ambio papers: The biotic perspective: This article belongs to Ambio’s 50th Anniversary Collection. Theme: Climate change impacts

Climate change represents one of the most pressing societal and scientific challenges of our time. While much of the current research on climate change focuses on future prediction, some of the strongest signals of warming can already be seen in Arctic and alpine areas, where temperatures are rising faster than the global average, and in the oceans, where the combination of rising temperatures and acidification due to increased CO₂ concentrations has had catastrophic consequences for sensitive marine organisms inhabiting coral reefs. The scientific papers highlighted as part of this anniversary issue represent some of the most impactful advances in our understanding of the consequences of anthropogenic climate change. Here, we reflect on the legacy of these papers from the biotic perspective.     

青藏高原生活污水处理及回用的工艺研究

在高寒缺氧的青藏高原如何对生活污水进行有效的处理,目前仍无好的解决方案。实验采用的生态大棚系统可在青藏高原的恶劣环境下提供适宜的人工小环境,保证生物处理正常运行所必需的热平衡、O2-CO2的循环平衡和水循环的平衡。采用的好氧生物-土地处理工艺不仅能保证污水处理达到国家一级排放标准,同时还解决了长期以来高原蔬菜种植的难题。     

Screening Capsicum Accessions for Capsaicinoids Content

Ninety Capsicum accessions selected from the USDA Capsicum germplasm collection were screened for their capsaicinoids content using gas hromatography with nitrogen phosphorus detection (GC/NPD). Fresh fruits of Capsicum chinense, C. frutescens, C. baccatum, C. annuum, and C. pubescens were extracted with methanol and analyzed for capsaicin, dihydrocapsaicin, and nordihydrocapsaicin. Mass spectrometry of the fruit crude extracts indicated that the molecular ions at m/z 305, 307, and 293, which correspond to capsaicin, dihydrocapsaicin, and nordihydrocapsaicin, respectively, have a common benzyl cation fragment at m/z 137 that can be used for monitoring capsaicinoids in pepper fruit extracts. Capsaicin and dihydrocapsaicin were the dominant capsaicinoids detected. Capsaicin concentrations were typically greater than dihydrocapsaicin. Concentrations of total capsaicinoids varied from not detectable to 11.2 mg fruit^?1. Statistical analysis revealed that accession PI-441624 (C. chinense) had the highest capsaicin content (2.9 mg g^?1 fresh fruit) and accession PI-497984 (C. frutescens) had the highest dihydrocapsaicin content (2.3 mg g^?1 fresh fruit). Genebank accessions PI-439522 (C. frutescens) and PI-497984 contained the highest concentrations of total capsaicinoids.     

Screening Capsicum chinense fruits for heavy metals bioaccumulation

Elevated concentrations of heavy metals in edible plants could expose consumers to excessive levels of potentially hazardous chemicals. Sixty-three accessions (genotypes) of Capsicum chinense Jacq, collected from 8 countries of origin were grown in a silty-loam soil under field conditions. At maturity, fruits were collected and analyzed for seven heavy metals (Cd, Cr, Ni, Pb, Zn, Cu, and Mo) concentrations. The main objectives of this investigation were: 1) to determine the concentrations of seven heavy metals in the soil and monitor their accumulation in mature fruits, 2) to categorize the pepper accessions as low or high heavy metal accumulators, and 3) to determine if heavy metal content of the pepper fruit was lower than the permitted limits. Concentrations and relative proportions of heavy metals in pepper fruits of C. chinense varied among accessions. Fruits of Plant Introduction (PI) 355820 accumulated significant concentrations of Cd (0.47 μ g g^?1dry fruit). PI-260522 accumulated the highest concentration of Pb (2.12 μ g g^?1 dry fruit) among the 63 accessions tested. This accession (PI-260522) contained about twice the Pb limit on a fresh weight basis. Among the 63 accessions analyzed, PI-238051 contained the highest levels of Ni (17.2 μ g g^?1). We concluded that high accumulator genotypes may be useful for phytoremediation, while, low accumulator accessions might be appropriate selections for growing on Cd-, Pb-, or Ni-contaminated soils to prevent potential human exposure to heavy metals and health hazards through the food chain.     

Simulation of the flow of an explosive atmosphere exposed to a hot surface

The accidental ignition of combustible atmospheres by hot surfaces is of great concern for chemical and process plant safety. In this paper, we present our research regarding the evolution of thermal plumes originating from hot hemispheres and discs. In particular, we focus on the effect of the orientation of the surface on the ignition process. The auto-ignition temperatures and ignition locations were studied experimentally. To get further insight, we conducted detailed numerical simulations and validated them with measurements. Three-dimensional simulations were performed on hot hemispheres and hot discs for different orientations ranging from 0° to 180°. The solver employs a transient, implicit scheme which is based on the coupled heat transfer and flow equations. The mesh in the vicinity of the hot surfaces is refined to resolve the steep temperature gradients and to capture the boundary layer separation. The influence of the orientation on critical hot spots in the gas mixture is analysed by examining the flow structures and the temperature evolution of the buoyancy-driven flow. Using the obtained results, we discuss the change of the onset and location of the ignition.     

Small scale boilover and visualization of hot zone

Experimental studies of boilover were conducted in small scale rig at Universiti Teknologi PETRONAS (UTP), Malaysia and Loughborough University, United Kingdom. The study at UTP was aimed to demonstrate the ability of conducting tests at a smaller scale to simulate the boilover phenomenon. At Loughborough University, a novel laboratory scale rig was designed and built in order to obtain visual records of fuels' behaviour in a pool fire. The ultimate objective of these studies is to develop a greater understanding of boilover pertaining to fires involving the contents of storage tanks. Fuel mixtures containing light and heavy components were burnt as to study the feasibility of reproducing hot zone formation and boilover in a smaller scale and a safe environment. Boilover occurred after certain period of burning. It is found that thickness of the hot zone changed with time. It is also found that the time needed to start boilover increased when fuel thickness increased. The visualization of the fuel behaviour during the experiments was obtained to better understand the formation and growth of hot zone, the boiling of water layer and hence the boilover occurrence. Based on the data analysis and the photographs recorded from the experiments, the laboratory scale experimental rig could be used to simulate the hot zone formation mechanism and the boilover event safely and successfully. Such information are important for the understanding towards boilover phenomenon.