重庆大气可吸入颗粒物中多环芳烃的分析测定

本文报告了重庆大气可吸入颗粒物(IP)中多环芳烃(PAH)的分析测定方法和结果.用GC-MS定性和定量分析了重庆IP中的PAH;研究了IP中PAH的种类和分布情况;确认重庆IP中存在甲基多环芳烃(MePAH)、约占33%;颗粒大小分布表明,约有98%PAH存在于小于3μm的颗粒中.     

气相色谱法测定空气和废气中8种烃类化合物

建立了针筒采样、大口径毛细管柱分离、气相色谱-氢火焰离子化检测器测定空气和废气中甲烷、乙烷、乙烯、乙炔、丙烷、异丁烷、正丁烷和正戊烷等8种烃类化合物的方法.优化了试验条件,方法线性良好,甲烷、乙烯、乙炔、乙烷、丙烷、异丁烷、正丁烷和正戊烷的检出限分别为0.09 mg/m3、0.20 mg/m3、0.18 mg/m3、0.29 mg/m3、0.28 mg/m3、0.37 mg/m3、0.16 mg/m3和0.56 mg/m3,RSD＜8.0%,加标回收率为80.5%～104%.     

河南双河油泥在生物降解过程中饱和烃污染物的组成与分布

分析了河南双河油泥在微生物降解过程中烷烃的组成与分布特征,结果表明,XT-4、F-2、C-2、A-1和AB-1菌的混合菌对饱和烃组分有好的降解效果:当饱和烃含量在60~70g/kg范围时,经过120d的降解,饱和烃降解率达到66.4%,随着降解的进行,正构烷烃分布由单峰形变成了双峰形;萜烷类抗微生物降解能力强,在本实验条件下,其组成与分布没有发生显著变化。微生物对烷烃类化合物易降解顺序为:正构烷烃>类异戊二烯烃>藿烷类,C21以前的正构烷烃>C22以后的正构烷烃,姥鲛烷>植烷,Tm>Ts,藿烷>莫烷。     

Field reconnaissance and estimation of petroleum hydrocarbon and heavy metal contents of soils affected by the Ebocha-8 oil spillage in Niger Delta, Nigeria

Field reconnaissance of the Ebocha-8 oil spill-affected site at Obiobi/Obrikom in the Niger Delta region of Nigeria was carried out to assess the extent of damage to the terrestrial ecosystem and delimit the epicenter of oil spillage. Following three successive reconnaissance surveys, the area to be sampled was delimited (200 x 200 m2), and soil samples were collected using the grid method from three replicate quadrats at two depths, surface (0-15 cm) and subsurface (15-30 cm). A geographically similar area located 50 m adjacent to the oil-polluted area was used as a reference (control) site. Total hydrocarbon content (THC) and heavy metal concentrations were later determined in the laboratory by extraction and spetrophotemetric techniques. Generally, the THC of soils at surface and subsurface depths of the oil-polluted plots was 2.06 x 10(4) +/- 4.97 x 10(3) mg/kg and 1.67 x 10(3) +/- 3.61 x 10(2) mg/kg soil, respectively, (no overlap in standard errors at 95% confidence limit) while concentrations of heavy metals(Pb, Cd, V, Cu and Ni) were enhanced, especially at the surface. The high levels of THC and heavy metals may predispose the site, which hitherto served as arable agricultural land, to impaired fertility and possible conflagration. When concentrations of heavy metals reach the levels obtained in this study, they may become toxic to plants or possibly bio-accumulate, thus leading to toxic reactions along the food chain. While the spilled-oil may have contributed to the enhanced levels of the metals in the affected soils, physico-chemical properties of the soils, mobility of metals, and the intense rainfall and flooding that preceded the period of study may have also contributed in part to their enhanced concentrations. The presence of high hydrocarbon content may cause oxygen deprivation, which may result in the death of soil fauna by asphyxiation. There is, therefore, an urgent need to clear the affected site of these excess hydrocarbon deposits so as to enhance the rehabilitation process of the affected mat layer of soils. Other appropriate mitigating measures, such as subsequent monitoring of hydrocarbon levels at suitable intervals after the clean up activities, are also recommended, with reference to the findings of this study, for effective management of the affected area.     

Pool evaporation: Experimental tests at medium-scale with gasoline

Pool evaporation is a major source of flammable vapour clouds. Predicting the evaporation rate of a liquid hydrocarbon pool is therefore a key issue of dispersion modelling for safety concerns. This paper presents small- and medium-scale experiments of pool evaporation carried out with liquid hydrocarbons (pentane, heptane), hydrocarbon “gasoline-like” mixtures and gasoline. Liquid mass loss was measured and the evaporation rate deduced with its evolution in time. Other observations are highlighted, regarding the evolution of liquid temperatures, mixture compositions, and scale effects like the influence of pool length on surface evaporation rate. Comparisons with well-known correlations are then shown. The authors finally suggest a new semi-empirical correlation with a set of parameters fitted on the performed experiments.     

Hydrocarbon degradation, plant colonization and gene expression of alkane degradation genes by endophytic Enterobacter ludwigii strains

The genus Enterobacter comprises a range of beneficial plant-associated bacteria showing plant growth promotion. Enterobacter ludwigii belongs to the Enterobacter cloacae complex and has been reported to include human pathogens but also plant-associated strains with plant beneficial capacities. To assess the role of Enterobacter endophytes in hydrocarbon degradation, plant colonization, abundance and expression of CYP153 genes in different plant compartments, three plant species (Italian ryegrass, birdsfoot trefoil and alfalfa) were grown in sterile soil spiked with 1% diesel and inoculated with three endophytic E. ludwigii strains. Results showed that all strains were capable of hydrocarbon degradation and efficiently colonized the rhizosphere and plant interior. Two strains, ISI10-3 and BRI10-9, showed highest degradation rates of diesel fuel up to 68% and performed best in combination with Italian ryegrass and alfalfa. All strains expressed the CYP153 gene in all plant compartments, indicating an active role in degradation of diesel in association with plants.     

Age-dating Diesel Fuel Spills: Using the European Empirical Time-based Model in the U.S.A.

In 1993, a paper was published by Christensen and Larsen that offered a method for determining the age of diesel oil spills in soil (Christensen and Larsen, 1993 Ground Water Mount. R . Fall , 142-149). It presented an empirical time-based model of the degradation of diesel fuel in soils using chemical data gathered at petroleum release sites in Denmark and the Netherlands. Now, evaluation of the validity of the application of this work to subsurface petroleum releases in other countries remains. In the U.S.A., investigations assessing date(s) of release of diesel fuel in soils, e.g. age dating of subsurface petroleum contamination, have considerable interest. Litigation-driven scientific investigations with accompanying expert testimony in a court of law are underway. The number of instances where application of the Christensen and Larsen empirical time-based model to petroleum-contaminated properties is growing in the U.S.A. This paper presents two case studies which evaluate the applicability of the Christensen and Larsen empirical time-based model to petroleum-contaminated properties in general. It illustrates the approach using gas chromatographic data from two recently-completed projects evaluating the applicability of the Christensen and Larsen model to a No. 2 fuel oil/diesel fuel surface spill in the U.S.A. Results showed that the application of the model to petroleum-contaminated soils was scientifically valid, provided its applicability was evaluated using hypothesis testing for specific changes in the characteristics of the petroleum hydrocarbon distribution in a number of soil samples collected over time at one site. The paper offers observations on the application of the Christensen and Larsen model to petroleum found in the light non-aqueous phase liquid (LNAPL) phase and groundwater.     

Mixing-controlled biodegradation in a toluene plume--results from two-dimensional laboratory experiments

Various abiotic and biotic processes such as sorption, dilution, and degradation are known to affect the fate of organic contaminants, such as petroleum hydrocarbons in saturated porous media. Reactive transport modeling of such plumes indicates that the biodegradation of organic pollutants is, in many cases, controlled by mixing and therefore occurs locally at the plume's fringes, where electron donors and electron-acceptors mix. Herein, we aim to test whether this hypothesis can be verified by experimental results obtained from aerobic and anaerobic degradation experiments in two-dimensional sediment microcosms. Toluene was selected as a model compound for oxidizable contaminants. The two-dimensional microcosm was filled with quartz sand and operated under controlled flow conditions simulating a contaminant plume in otherwise uncontaminated groundwater. Aerobic degradation of toluene by Pseudomonas putida mt-2 reduced a continuous 8.7 mg L(-1) toluene concentration by 35% over a transport distance of 78 cm in 15.5 h. In comparison, under similar conditions Aromatoleum aromaticum strain EbN1 degraded 98% of the toluene infiltrated using nitrate (68.5+/-6.2 mg L(-1)) as electron acceptor. A major part of the biodegradation activity was located at the plume fringes and the slope of the electron-acceptor gradient was steeper during periods of active biodegradation. The distribution of toluene and the significant overlap of nitrate at the plume's fringe indicate that biokinetic and/or microscale transport processes may constitute additional limiting factors. Experimental data is corroborated with results from a reactive transport model using double Monod kinetics. The outcome of the study shows that in order to simulate degradation in contaminant plumes, detailed data sets are required to test the applicability of models. These will have to deal with the incorporation of existing parameters coding for substrate conversion kinetics and microbial growth.     

基于主成分分析-多元线性回归的松花江水体中多环芳烃源解析

对松花江全流域14个监测断面的16种美国环保局优先控制的多环芳烃(PAHs)的主要来源及其贡献率应用主成分因子分析-多元线性回归模型(PCA-MLR)进行了来源解析。结果表明:松花江全流域为化石和石油燃料的复合PAHs污染,水体环境中PAHs首要污染源为化石燃料燃烧和交通污染,合计贡献率为63.1%,第二大污染源为工业和民用燃煤污染,合计贡献率为36.9%,沿江的石化、石油基地、大型焦化厂、电厂都是PAHs的主要来源。     

A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures

Fly and bottom ashes are the main by-products arising from the combustion of solid biomass. Since the production of energy from this source is increasing, the processing and disposal of the resulting ashes has become an environmental and economic issue. Such ashes are of interest as a construction material because they are composed of very fine particles similar to fillers normally employed in bituminous and cementitious mixtures. This research investigates the potential use of ash from biomass as filler in bituminous mixtures. The morphological, physical and chemical characteristics of 21 different ashes and two traditional fillers (calcium carbonate and “recovered” plant filler) were evaluated and discussed. Leaching tests, performed in order to quantify the release of pollutants, revealed that five ashes do not comply with the Italian environmental re-use limits. Experimental results show a wide range of values for almost all the investigated properties and a low correlation with biomass type in terms of origin and chemical composition. Furthermore, sieving and milling processes were found to improve the properties of the raw material in terms of grading and sample porosity. The effectiveness of these treatments and the low content of organic matter and harmful fines suggest that most of the biomass ashes investigated may be regarded as potential replacements for natural filler in bituminous mixtures.