Eco-design practices towards sustainable supply chain management: interpretive structural modelling (ISM) approach

Due to increasing emphasis on sustainable practices, many organisations have attempted to leverage their supply chain performance towards balancing triple bottom line dimensions (economic, environmental and social perspectives). This paper, therefore, determines the priorities of sustainable supply chain management focusing on eco-design. Interpretive structural modelling (ISM) and Matriced’ Impacts Croise’s Multiplication Appliquée a UN Classement (MIMAC) are used to identify the hierarchical structure of the relationships among eco-design dimensions, and to analyse characteristics power of each dimension on supporting eco-design practices. The relationships and characteristics power of each dimension are used to determine indicators that are effective in enhancement of eco-design practice, evaluated through sustainable supply chain performance. Results indicate that product deployment is an important approach for improving eco-design practice towards sustainable supply chain management. This emphasises the purpose and impact of eco-design on sequential supply chain activities at deployment phase. Further research is required to make an overall assessment of eco-design practices across range of manufacturing industries, given the current research is based on inputs from a limited number of experts of selected organisations.     

THE REGULATED RIPARIAN VERSION OF THE ASCE MODEL WATER CODE: THE THIRD WAY TO ALLOCATE WATER1

ABSTRACT: Lawyers, engineers, and hydrologists are accustomed to thinking of water law as falling into one of two incompatible models: riparian rights (under which water is allocated by courts according to the relative reasonableness of the competing uses) and appropriative rights (under which water is allocated according to the temporal priority of the competing uses, largely by the action of the water users themselves but perfected by the issuance of an administrative permit). Usually unnoticed is the existence of a third approach, which I have dubbed “regulated riparianism.” Under regulated riparianism, water is allocated by water permits issued after an administrative determination of the reasonableness of the proposed use before the use is commenced. This system, now in place in about half of the states east of Kansas City (plus Hawaii), thus is fundamentally different from either the traditional ripanan rights that it replaces or the appropriative rights found in western states.     

基于ISM的建筑施工高处坠落事故致因分析

高处坠落是建筑工程事故统计中发生频率最高的一类事故,会造成极大的人员伤害和经济损失。通过分析123例典型高处坠落事故调查报告,采用关键词检索抽取出19种导致该类事故发生的致因要素;针对一般事故和较大事故分别对致因要素发生频率进行了统计,得出一般事故中人的因素更关键,较大事故中物的因素更关键。采用ISM模型进一步分析致因要素间的作用关系,构建了7个层级的高处坠落致因要素解释结构模型;对不同层级要素进行分析,发现其与频率度量有良好的一致性,最后得出行政监管和违法承发包两个致因要素是事故发生的深层原因。     

太湖水体富营养化中农业面污染源的影响研究

太湖流域地处长江三角洲核心部位,是我国的工业经济中心,但同时也是水体富营养化最严重的地区之一。文章通过实地调研、采集得到太湖流域污染的相关数据资料,运用结构解析模型(ISM)建模,通过研究太湖蓝藻各诱发因子的主次关系,对太湖蓝藻危机爆发的成因做了深入的分析。并以GIS为平台核算其耕地面积,结合当地土壤数据及作物特征,计算出了太湖流域农业每年磷的排放量,占总磷排放量的70.7%,得出农业面源产生的的氮、磷流失是引起太湖水体富营养化的重要原因。     

集成DEMATEL-ISM的古建筑火灾致因因素评价

为深入了解古建筑火灾事故致因因素,提高古建筑消防安全管理水平,基于事故致因理论,采用德尔菲法从人员、古建筑消防系统、古建筑防火能力、安全管理与环境五个方面确定18个古建筑火灾致因因素,并建立古建筑火灾事故评价指标体系。同时运用实验室决策分析法(DEMATEL)构建矩阵对古建筑火灾致因因素进行分析。一方面,通过原因度定量结果对古建筑火灾致因因素的属性进行分类,确定其属于火灾原因因素还是结果因素;另一方面,通过中心度指标评价古建筑火灾各个致因因素的重要程度。进而利用解释结构模型(ISM)将致因因素进行层级划分,构建5层3阶的多级递阶模型,分析致因因素间的耦合和交互关系。结果表明,古建筑火灾事故的发生是近邻原因、过渡原因及本质原因共同作用的结果,并针对这三方面确定古建筑火灾事故重点管控方向。同时,在古建筑消防安全管理中,应重点关注中心度较大的致因因素。     

林聪悟-直线法在基于美国混凝土规范设计中的程序实现

首先,阐述了美国ACI318-08规范中钢筋混凝土受弯、受压构件的设计原理和基本假定。与我国混凝土结构设计规范不同,ACI318-08规范是根据构件的受力破坏形态来确定名义抗压和抗弯承载力的折减系数的,相对于延性破坏,脆性破坏构件的承载力折减较多。然后,由平衡条件、平截面假定及Newton迭代格式,推导出林聪悟-直线法的计算公式。编制程序实现该算法时,须根据最大、最小配筋率的规定对迭代区域进行限定;在确定P-M相关曲线上的拐点位置的基础上,实现中性轴高度在曲线上的分段迭代。通过在曲线拐点处设置微小增量及自动调整中性轴高度等方法,解决了程序计算时可能出现的迭代发散问题。算例表明,所编制程序的计算结果具有很高的精度。     

An approach to calculating allowable watershed pollutant loads

To improve the management of discharge pollutants loads in the reservoirs’ watershed, an approach of the allowable pollutants loads calculation and its allocation, based on the water environment model, was proposed. Establishment of the approach framework was described at first. Under the guidance of this framework, two major steps were as follows: modeling and scenario analysis were involved and should be applied to support the decision of discharge loads management; Environmental Fluid Dynamic Code (EFDC) model was selected as the kernel model in this framework. In modeling step, spatial discretization for establishing cell map in model, data preprocessing, parameter calibration and uncertainty analysis (which is considered as the significantly relevant factor of the margin of safety (MOS)), were conducted. As a result of the research, the model-based approach presented as a combination of estimation and precise calculation, which contributed to scenario analysis step. Some integrated modules, such as scenario simulation, result analysis and plan optimization were implemented as cycles in the scenario analysis. Finally, allowable pollutant loads under various conditions were calculated. The Chaihe Reservoir in Liaoning Province, China was used as a case study for an application of the approach described above. Results of the Chaihe reservoir water quality simulation, show good agreement with field data and demonstrated that the approach used in the present study provide an efficient and appropriate methodology for pollutant load allocation.     

An optimal level of dust explosion risk management: Framework and application

The current research provides guidance on the prevention and mitigation of dust explosion using a Quantitative Risk Management Framework (QRMF). Using concepts drawn from previous studies, the framework consists of three main steps: (i) a new combined safety management protocol, (ii) the use of DESC (Dust Explosion Simulation Code) and FTA (Fault Tree Analysis) to assess explosion consequences and likelihood, respectively, and (iii) application of the hierarchy of controls (inherent, engineered and procedural safety). QRMF assessment of an industrial case study showed that the original process was at high risk. DESC simulations and Probit equations determined the destructive percentages. FTAs revealed high probabilities of explosion occurrence; in addition, detailed individual and societal risks calculations were made, before and after the framework was applied. Based on the hierarchy of controls technique, the framework showed significant risk reduction to the point where the residual risk was acceptable for the process.     

航运企业风险评估的实施

航运业历来就是一种高风险的行业,随着航运科技和安全管理手段的不断发展,全球航运安全形势呈现了良好的态势,尤其自1998年7月1日国际海事组织公布了以ISO9002为基准的《国际安全管理规则》（ISM CODE）以来,航运业的安全管理进入了国际标准化时代。为进一步完善航运业的标准化管理,国际海事组织在85届海安会上通过了MSC.237（85）决议批准了ISMCODE的修正案,并要求航运企业自2010年7月1日起针对安全和防止污染的任何活动都需要进行风险评估。为保证航运企业能够正确进行安全活动的风险评估,以满足该修正案的要求,应用风险决策法系统分析了航运企业进行船舶、人员和环境风险评估所涉及的各个要素。提出一套合理、实用和系统的航运企业风险评估方法,并对风险评估实施过程需要特别关注的问题进行阐述。对进一步提高船舶安全操作水平有了重要的现实意义。     

生态环境损害惩罚性赔偿规则的检视与适用

生态环境损害的惩罚性赔偿规则首次在《民法典》侵权责任编中确立。针对这项制度创新,本文梳理了惩罚性赔偿规则在不同法律制度中适用范围和适用条件的差异性,并进一步分析惩罚性赔偿在生态环境损害救济体系中所具有的特殊规则和功能定位。在缺乏生态环境领域部门法配套的情况下,《民法典》中惩罚性赔偿规则的适用应基于生态环境的公益性而适当扩大请求权主体范围,基于严格法定性而明确举证责任负担和证明标准,基于生态环境要素的特殊性而完善多样化的赔偿内容和计算方法。