射流曝气周期活性污泥法脱氮除磷研究

针对零星居民点的污水处理,开发了射流曝气周期活性污泥法工艺.它是一种连续进水、周期性间歇曝气的改良型SBR工艺,也是一种时间程序和空间程序相结合的污水处理工艺,具有良好的脱氮除磷效果.试验表明,在水力负荷4 m3/d,曝气周期为每2 h曝气15 min、静置105 min的条件下,出水COD为48.8～53.5 mg/L,去除率达79.4%～80.5%;出水TN为2.81～3.98 mg/L,去除率达82.4%～89.4%;出水NH3-N为0.36～0.78 mg/L,去除率高达96.4%～98.4%;出水TP为0.63～1.18 mg/L,去除率为67.2%～78.9%,均可达到《城镇污水处理厂污染物排放标准》(GB 18918-2002)中的一级B排放标准.     

Individual risk analysis of high-pressure natural gas pipelines

Transmission pipelines carrying natural gas are not typically within secure industrial sites, but are routed across land out of the ownership of the pipeline company. If the natural gas is accidentally released and ignited, the hazard distance associated with these pipelines to people and property is known to range from under 20 m for a smaller pipeline at lower pressure to up to over 300 m for a larger pipeline at higher pressure. Therefore, pipeline operators and regulators must address the associated public safety issues.This paper focuses on a method to explicitly calculate the individual risk of a transmission pipeline carrying natural gas. The method is based on reasonable accident scenarios for route planning related to the pipeline's proximity to the surrounding buildings. The minimum proximity distances between the pipeline and buildings are based on the rupture of the pipeline, with the distances chosen to correspond to a radiation level of approximately 32 kW/m². In the design criteria for steel pipelines for high-pressure gas transmission (IGE/TD/1), the minimum building proximity distances for rural areas are located between individual risk values of 10⁻⁵ and 10⁻⁶. Therefore, the risk from a natural gas transmission pipeline is low compared with risk at the building separated minimum distance from chemical industries.     

控制排气放空噪声的消声器之研究与应用

排气放空噪声是工业上常遇到的噪声源。本文介绍了根据喷注噪声发射理论研制成的小孔喷注与节流降压相复合的新型消声器，适用于高压气源排放，取得了较好的消声效果。鉴于喷注发射噪声的强度取决于喷注的驻压与喷口直径等参量，对节流降压层的设计与控制小孔喷注层的驻压大小，提出了新的见解，可供设计研究喷注消声器参考使用。     

Trimethylbenzoic acids as metabolite signatures in the biogeochemical evolution of an aquifer contaminated with jet fuel hydrocarbons

Evolution of trimethylbenzoic acids in the KC-135 aquifer at the former Wurtsmith Air Force Base (WAFB), Oscoda, MI was examined to determine the functionality of trimethylbenzoic acids as key metabolite signatures in the biogeochemical evolution of an aquifer contaminated with JP-4 fuel hydrocarbons. Changes in the composition of trimethylbenzoic acids and the distribution and concentration profiles exhibited by 2,4,6- and 2,3,5-trimethylbenzoic acids temporally and between multilevel wells reflect processes indicative of an actively evolving contaminant plume. The concentration levels of trimethylbenzoic acids were 3-10 orders higher than their tetramethylbenzene precursors, a condition attributed to slow metabolite turnover under sulfidogenic conditions. The observed degradation of tetramethylbenzenes into trimethylbenzoic acids obviates the use of these alkylbenzenes as non-labile tracers for other degradable aromatic hydrocarbons, but provides rare field evidence on the range of high molecular weight alkylbenzenes and isomeric assemblages amenable to anaerobic degradation in situ. The coupling of actual tetramethylbenzene loss with trimethylbenzoic acid production and the general decline in the concentrations of these compounds demonstrate the role of microbially mediated processes in the natural attenuation of hydrocarbons and may be a key indicator in the overall rate of hydrocarbon degradation and the biogeochemical evolution of the KC-135 aquifer.     

两种曝气设备的清水曝气充氧实验研究

根据清水充氧实验计算,比较了微孔雾化软管曝气和射流曝气的充氧动力效率和氧利用率.以及后续实验的结果,最终得出微孔曝气软管曝气是高效节能的河流整治方法.     

API Standard 521 new alternative method to evaluate fire relief for pressure relief device sizing and depressuring system design

Since the 1950's, API Standards have provided guidance on determining relief loads for equipment exposed to pool fires. The API method is empirical based on tests performed in the 1940's. There is increasingly widespread interest in analytical methods based on heat transfer principles to model fire heat input. The API committee agreed to include an analytical method in the 6th edition of API Standard 521 to establish relief loads for pressure relief devices and to design depressuring systems for the fire scenario. The analytical method provides more flexibility than the empirical method but has limitations (e.g., too many permutations are possible leading to potential under-sizing of the pressure relief device).This paper discusses the basis for the empirical method in API Standard 521 and provides comparisons of the empirical and analytical method with two more recent large-scale pool fire tests. This pool fire test data indicates that the empirical method will provide a conservative estimate of pool fire heat input for most applications and is still the method of choice when designing pressure relief systems. However, these recent tests indicate the empirical method needs to be modified when a vessel or equipment is partially confined by adjacent embankments or walls equal or greater than the vessel height. In such cases, the wetted area exponent should be 1.0 instead of 0.82.The analytical method is useful in determining time-versus-temperature profiles for heating unwetted vessels of varying wall thicknesses and materials of construction. These profiles, which depend upon the type of fire (e.g., unconfined pool fire, jet fire, etc.), can be combined with tensile strength and stress-rupture data to specify a depressuring system's pressure-versus-time profile. This will minimize failure and/or mitigate the effects of failure due to overheating from fire exposure.     

城市污水排江工程模型试验的研究

对城市污水排江问题进行了模拟试验,通过对水力模型不同试验工况中改变喷嘴个数、射流速度、射流角度和上升管间距条件下的试验结果分析,结合武汉市污水排江工程问题,确定了黄浦路、平湖门尾水排放中的近区多喷口形式的最佳工程参数,实践证明效果良好。     

飞机防火试验中的燃烧反应动力学模型研究

使用反应路径分析法对Jet-A型航空煤油燃烧的气相燃烧机理进行简化。选用POSF-4658机理作为Jet-A燃烧的详细反应机理,该机理包含1607种燃烧组分、6633个基元反应机理。将飞机防火试验条件作为简化过程的初始条件,得到78种组分,196个反应机理的Jet-A燃烧机理。通过对Jet-A的简化反应机理、详细反应机理和JetA实验数据的比较可以发现,简化反应机理可以较准确地反映Jet-A型航空煤油在防火试验条件下的燃烧特性。利用常用的Jet-A型航空煤油简化机理计算的绝热火焰温度、点火延迟时间及层流火焰速度与本文提出的简化的计算值进行比较。结果表明,提出的简化机理在防火试验条件下具有较高的精确度。得到的Jet-A简化反应机理可为飞机防火试验的仿真研究提供燃烧场的化学反应动力学模型。     

Analyzing effective factors on leakage-induced hydrogen fires

Currently, novel energy resources are receiving increasing attention as a response to the limitation in fossil fuels as well as their adverse effects on human health. Hydrogen, one of the most abundant elements on the earth, can be regarded as a new energy source to replace fossil fuels. Therefore, safety assessment of the relating processes is very crucial by increasing use of hydrogen as a fuel source. In this regard, consequence analysis for risk assessment and power reduction is very important. The present study aims at modeling hydrogen dispersion along with consequence analyses for such events as jet fire and flash fire. The model was validated by using the data derived from a study on hydrogen leakage in supply pipelines in the laboratory of the University of Pisa. Modeling results reveal that ambient conditions will impose a milder impact on leakage consequences if internal pressure is high in release source. The safe distance was also estimated to be 14 m. Dispersion consequence modeling was performed, followed by the evaluation of the effect of environmental (i.e., stability, ambient temperature, surface roughness, wind speed, and humidity) and process (i.e., vessel temperature and pressure, leakage diameter, and releasing point height) parameters on maximum size flammable vapor cloud and maximum level jet fire radiation on the ground. The size of flammable vapor cloud (consequence dispersion index) and the maximum flux of radiation were affected by process parameters more than ambient parameters. Leakage diameter and the vessel pressure were found to have the highest impact on the operational parameters.     

Ignition hazard evaluation on A2L refrigerants in situations of service and maintenance

To restrict the progress of the global warming, A2L refrigerants such as 2,3,3,3-tetrafluoroprop-1-ene (R1234yf), (Z/E)-1,3,3,3-tetrafluoroprop-1-ene (R1234ze), and difluoromethane (R32) have been expected of alternatives to the standard refrigerants currently in use. The ignition hazard of A2L refrigerants under plausible accident situations in service and maintenance was examined experimentally for two cases: leakage of an A2L refrigerant from a pinhole in a pipe or hose (Scenario 1), and leakage of an A2L refrigerant into an item of equipment used for service and maintenance, such as a collection device (Scenario 2). In Scenario 1, the location of the flammable zone and the possibility of a jet flame being formed instantaneously on contact with an ignition source were examined. Even when R1234yf leaked from a 4 mmϕ pinhole (corresponding to breakage of a pipe), the flammable zone extended only about 10 cm from the pinhole in the downstream region. In an ignition test with a continuous spark as the ignition source, a pale emission appeared only near the spark, and the flame did not propagate to the rest of the refrigerant jet. In Scenario 2, the accumulation and ignition behaviors of A2L refrigerants in a model collection device were examined experimentally. Ignition and flame propagation occurred in a test on a model collection device lacking slits, whereas when slits wider than 20 mm were present, ignition and flame propagation did not occur. Even if R1234yf leaked into the model collection device, provided that slits of an effective width were present, the R1234yf could diffuse through slits and barely accumulated, and no ignition or flame propagation occurred.