北京市农业机械排放因子与排放清单

利用车载排放测试技术对典型的联合收割机、拖拉机、农用运输车和农田建设机械实际工况下的尾气进行测试,建立了实际工况下农业机械的排放因子和2017年北京市农用机械排放清单.结果表明,不同的工作状态对农业机械尾气排放有较大的影响,怠速和行走时CO、NO_x、HC和PM排放趋于平稳;而切地和翻地模式下的波动较为明显.根据各类机械的分类和排放标准对排放因子进行细化,建立了较为完整的实际工况下的排放因子.根据农业机械排放因子和燃油消耗量计算出2017年北京市CO、NO_x、HC和PM的排放量分别是2 566.60、 1 239.29、 563.08和538.32 t.拖拉机、运输机械和联合收割机的污染物总量占CO、NO_x、HC和PM这4种污染物总量的98%、 95%、 95%和98%.因此,农用拖拉机、运输机械和联合收割机在农业机械污染减排中应作为重点控制对象.     

电动单梁起重机吊具冲顶引发起升电机坠落事故分析

针对一起电动单梁起重机吊具冲顶并引发起升电机坠落的起重作业事故,分析了事故起重机电气控制系统和现场紧急处置中存在的问题,指出了导致事故发生的直接原因和主要原因;并从完善起重机电气控制系统本质安全性和加强起重机械使用安全管理的角度提出了相应建议和意见,对预防类似事故的发生具有借鉴作用.     

起重机械吊物(具)坠落砸人事故原因分析

运用调查和分析的方法,找出起重机械吊物(具)坠落砸人事故的原因,同时提出安全对策措施.     

成都市典型非道路工程机械排气烟度分析

采用不透光烟度计采集了成都市典型工程机械(挖掘机、装载机、叉车和压路机)排气烟度,研究了机械功率对其活动水平(燃油消耗量和年均工作时间)的影响,同时也研究了机械发动机构造和机械排放标准对其排气烟度的影响;同时,采用氮硫测定仪分析了机械油品硫含量,研究了硫含量对其排气烟度的影响.试验结果表明:机械功率越大的工程机械,燃油消耗量和年均工作时间数越高.成都典型工程机械排气烟度排放水平最低的为装载机,最高的为压路机;同时,超高排放装载机与叉车的占比较高.工程机械排气烟度受机械发动机排量、机械发动机构造、机械发动机排放标准和机械用油的综合影响,通过对工程机械装配电控发动机、提高原机排放标准和使用低硫燃油均能直观反映出机械排气烟度不同程度的改善.此外,油品中硫含量越高,机械排气烟度越大.     

Lifting technique and abdominal belt usage: a biomechanical, physiological and subjective investigation

Some 10 male subjects carried out a repetitive lifting task for 15 min under four conditions on separate days. Subjects used either a squat lifting or a stoop lifting technique with or without an abdominal belt on each day. Measurements of spinal shrinkage, heart rate, perceived exertion and regional body pain were made under each condition. Although there was a significant difference in spinal shrinkage under all lifting conditions compared with shrinkage during 15 min of quiet standing (4.36 ± 2.24 vs. 1.13 ± 1.18 mm), there were no significant differences in shrinkage between the conditions. The subjects' heart rates were higher during the squat lift than the stoop lift (123 vs. 97 beats/min; p < 0.001). While the squat lift was perceived to be the safest lift by 90% of the subjects, 60% regarded this lift as the least preferred method (with or without the belt). Although all 10 subjects perceived the safest lifting method to involve the use of the belt, 50% rated the belt as their least preferred lifting condition. The findings cast doubt on the efficacy and acceptability of both abdominal belts and the practice of training workers in ‘safe’ lifting techniques and indicate that individual characteristics and preferences need to be considered when attempting to improve the safety of manual handling operations in industry.     

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.     

基于油耗调查的2010年天津市农业机械排放研究

通过问卷调查,采用基于燃油消耗量的方法估算出天津市2010年农业机械氮氧化物(NOx)和颗粒物(PM)的总排放量.2010年天津市农业机械总保有量为57.5万台,其中种植业机械最大约占52.5%;总动力为588万kW,运输机械占比最大为47.3%.估算出2010年天津市农业机械总油耗(主要为柴油)为6.7万t,其中运输机械耗油量为4.5万t.再根据燃油消耗量估算了天津2010年农业机械污染物排放量,NOx和PM年排放量分别为3470t和303t.     

Evaluating repeated patient handling injuries following the implementation of a multi-factor ergonomic intervention program among health care workers

Objective

The objective of this study was to evaluate repeated patient handling injuries following a multi-factor ergonomic intervention program among health care workers.

Methods

This was a quasi-experimental study which had an intervention group and a non-randomized control group. Data were collected from six hospitals in Saskatchewan, Canada from September 1, 2001 to December 1, 2006.

Results

A total of 1,480 individuals who had a previous injury were eligible for the study. Medium and small size hospitals in the intervention group had significantly fewer repeated injuries than in the control group. Multivariate analysis showed that the intervention group had 38.1% lower odds of having repeated injury compared to the control group, after adjusting for hospital size.

Conclusions

The work-related repeated injury after a multi-factor intervention program was reduced. The synergistic relationships between components of multi-factor intervention and applicability of injury prevention programs to different settings need to be further explored.

Impact on Industry

Implementing a multi-factor program with the right equipment and training can lower the risk of injury among health care workers.     

机械装备故障预测系统分析

针对机械装备复杂多变的服役状态,分析了机械装备的故障预测系统,了机械装备故障预测系统的研制目的,系统特性,提出了系统的设计原则,建立了系统的总体功能结构及系统的预测模型,并探讨了故障预测系统的评价指标。     

回转升降生物接触工艺的研究

提出了一种具有全新运转方式的RBC系统———回转升降生物接触工艺 ,并对回转升降生物接触工艺的工作原理和工艺特征进行了论述。通过实验 ,对回转升降生物接触工艺小型实验装置的性能进行了初步考察