共振光散射技术在环境分析中的应用

共振光散射技术是一项在普通荧光分光光度计上进行测量的光散射技术,文章简要介绍了光散射现象,共振光散射的基本原理并作了定量基础讨论,对共振光散射技术在环境分析中的应用作了初步研究。     

太湖梅梁湾水体中可见光的衰减、吸收及散射

对太湖梅梁湾沿岸带和敞水区的水体进行了光学特性研究。结果发现，沿岸带的水下光辐射衰减系数(Kd)值较敞水区小；400nm与500nm向上辐照度比值(Eu440／Eu550),沿岸带在1m左右最小,敞水区在0．5m左右最小;沿岸带的水面下向上辐照度与向下辐照度的比值(R)低于敞水区：440、550、670nm的后向散射与吸收的比值(b／a),在沿岸带的1m处最大,敞水区在0．5m处最大。这些结果说明,相对于敞水区而言,沿岸带的光衰减较弱,无机悬浮颗粒的含量较少,最大叶绿素a分布较深。     

光强度对景观水体水质影响探讨

对景观水体来说,阳光会对水质产生一定的影响,而了解此影响的规律可以为更好的保持景观水质提供依据.在遮光和见光两种环境下对水体进行监测,发现光照首先体现在对藻类的影响上,而藻类的繁殖会对其他指标产生连锁反应,进而影响到整个水质情况.水体表面覆盖一定量的水生植物可以从遮光角度对水质的保持有所帮助.     

轻烧镁窑烟尘污染治理技术的筛选与应用

利用煤气发生炉生产煤气，烧结轻烧镁，具有产品质量高，大幅度削减烟尘排放量，节约能源等优点，该项技术具有广泛的推广价值，本文较详细地介绍了辽宁省轻烧镁窑烟尘污染治理技术的典型，具有同类技术的国内先进水平．     

摩托车后挡泥板冲孔模

分析了摩托车后挡泥板的冲孔工艺,着重介绍了摩托车后挡泥板冲孔模的结构。该模具布局合理,结构紧凑,提高了生产效率,降低了生产成本,从而降低了摩托车的造价,提高了摩托车的市场竞争力。     

4—氯苯甲酸钠的光催化氧化降解及其影响因素

本试验采用P－25TiO2，光催化剂，对4－氯苯甲酸钠的光催化氧化降解及污染物初始浓度，催化剂投加量和入射光强等因素的影响进行了研究，研究发现污染物初始降解速率与其初始浓度的关系遵循Langmuir-Hinshelwood模式，其中半饱和浓度常数Ks不仅是催化剂和污染物种类的函数，而且也是入射光强的函数，催化剂投加量存在一限值，当低于此限值时，污染物降解速率由于催化剂浓度的不足受到影响而下降，当高于此限值时，污染物降解速率受催化剂投加量的影响变小，在本试验4－CBA－Na浓度为0.15-0.6mmol／L时该催化剂限值浓度大约为0.4g/L，在入射光强为1-7mW/cm^2和催化剂浓度为0.4g／L下，污染物降解速率与光强成0.67次幂关系，经估算其量子效率为6．3％。     

Trauma demography and clinical epidemiology of motorcycle crash–related head injury in a neurosurgery practice in an African developing country

Objective: Though motor vehicle crashes (MVCs) were the main cause of head trauma from road traffic injuries (RTIs), motorcycle crashes (MCCs) are now a major cause of RTI-related head injury (HI) in many developing countries.

Methods: Using a prospective database of HIs from a neurosurgical practice in a sub-Saharan African developing country, a cross-sectional survey was conducted for the trauma demography and clinical epidemiology of this MCC-related HI.

Results: Motorcycle crashes accounted for 57% (473/833) of all RTI-related HIs in this registry. The victims, with a mean age of 33.1 years (SD = 18.3), consisted mainly of males (83.1%), those of low socioeconomic status (>90%), and those aged between 20 and 40 years old (56%). MCCs involved only riders in 114 cases (114/473, 32.1%), of which 69% were motorcycle–motorcycle crashes. The HI was moderate–severe in 50.8%; clinical symptomatology of significant HI included loss of consciousness (92%), anisocoria (35%), Abbreviated Injury Scale head (AIS–head) score > 3 (28%), and CT-Rotterdam score > 3 (30%). Extracranial systemic injury involved the limbs most frequently, with an Injury Severity Score (ISS) >25 in 49%. The fatality rate was 24%.

MCC-related HI among pedestrian victims involved more vulnerable age groups (the young and elderly) but have lower mean ISS compared to motorcycle passengers (mean ISS = 23.5 [11.6] vs. 27.4 [13.0]; 95% confidence interval [CI], 1.27–6.49; P = .004). In addition, compared to a contemporary cohort of MVC-related HIs in our registry, MCC victims were older (mean age 34.8 years [18.0] vs. 30.8 [18.4]; P = .002); had higher proportions of certain extracranial trauma like long bone fractures (71 vs. 29%; P = .02); and suffered fewer surgical brain lesions (25.5 vs. 17.2%; P = .004).

Conclusions: Motorcycle crashes are now a significant threat to the heads, limbs, and lives of vulnerable road users in developing countries.     

BTEX pollution caused by motorcycles in the megacity of HoChiMinh

Monitoring of benzene, toluene and xylenes (BTEX) was conducted along with traffic counts at 17 roadside sites in urban areas of HoChiMinh. Toluene was the most abundant substance, followed by p,m-xylenes, benzene, o-xylene and ethylbenzene. The maximum observed hour-average benzene concentration was 254 μg/m3 . Motorcycles contributed to 91% of the traffic fleet. High correlations among BTEX species, between BTEX concentrations and the volume of on-road motorcycles, and between inter-species ratios in air and in gasoline indicate the motorcycle-exhaust origin of BTEX species. Daily concentrations of benzene, toluene, ethylbenzene, p,m-xylenes and o-xylene were 56, 121, 21, 64 and 23 μg/m 3 , respectively. p,m-xylenes possess the highest ozone formation potential among the BTEX family.     

城市光污染对驾驶安全性影响评价研究

在分析城市光污染对驾驶安全性影响评价特点的基础上,结合相关评价指标体系,引入李克特量表法构建安全性评价量表,并基于物元理论对城市光污染对驾驶安全性影响进行评价。选择了成都市4条道路进行实例分析,得出了较为准确的城市光污染对驾驶安全性影响等级评价结果。     

Traffic behaviour among adolescents using mopeds and light motorcycles

INTRODUCTION: Motorcycling is recognized to be a relatively risky activity. Powered two wheelers (PTW) are classified as mopeds, light, and heavy motorcycles, the first two categories being denoted light PTWs. This paper reviews the scientific literature on accident risks and traffic behavior among users of light PTWs with the aim of clarifying the current state of knowledge. METHOD: Based on a risk analytical and an anthropological perspective on motorcycling, the paper discusses the significance of cultural and social factors as important aspects of safety. More targeted and effective safety measures, for example better training programs, are needed to prevent motorcycle accidents. This means developing a deeper understanding of the rider as an individual, and the individuals within different groups and settings. Why and how motorcyclists approach the road, its function as a social arena, the varieties of goals and values, and the motorcyclists' own perceptions of the behavior that ensures their "achievements" or "successes", are some of the issues. Today, this kind of knowledge is scarce and almost entirely absent from the scientific literature. RESULTS: We conclude that the massive quantities of data on numbers of accidents, the categorization of situations, the causal explanations related to speed, gender, age, lack of concentration so forth, can only be employed as support for safety measures as long as they are linked to social and cultural factors. IMPACT ON INDUSTRY: Risk informed decision making has become an integral part of authorities' and manufacturers' implementation of safety measures. This tendency is strengthened by the fact that the responsibility of product safety rests upon the manufacturers, cf. for example EU safety regulations. Therefore it is paramount that a thorough understanding of social and cultural factors related to the PTW driving is necessary for the industry to develop targeted and efficient safety measures.