Influence of physical properties of ammonium nitrate on the detonation behaviour of ANFO

In order to obtain a better understanding of the non-ideal detonation behaviour of ammonium nitrate based explosives, detonation velocities of ANFO (ammonium nitrate and fuel oil) prepared with different kinds of ammonium nitrate (AN) were measured in steel tubes. In this series of test six kinds of AN were used and the influence of the pore diameter, the pore volume and the particle diameter of the AN particle on the detonation velocity of ANFO was investigated.

It was found that the pore diameter and the pore volume had a strong influence on the detonation velocities of ANFO. In the case of ANFO samples which were prepared with AN that had the same pore diameter and the pore volume, when tested the highest detonation velocity (3.85 km/s) was observed when the smallest particle diameter (<0.85 mm) was used. This value corresponded to 75% of the ideal detonation velocity, which was theoretically predicted by the CHEETAH code with the JCZ3-EOS.

The 12 months aging showed the change of the detonation velocities of ANFO and the reaction of ANFO was influenced both by the physical and the chemical properties of AN particles and oil during the storage period.     

Evaluating relief events in binary mixtures with dynamic simulations

Relieving rates in ethanol/water and ethylene glycol/water mixtures were investigated using dynamic models of an emergency relief scenario due to an external heat source. A commonly used shortcut method was compared to two rigorous calculation methods—one using ideal conditions and another using non-ideal conditions. In several cases, the shortcut method provides a reasonable estimate compared to the rate predicted by the more rigorous methods. However, in many cases the shortcut method over or under-predicts the required relieving rate—sometimes by a significant amount. Several discrepancies are also noted between non-ideal and ideal conditions. This study demonstrates that each multi-component mixture must be carefully considered before sizing emergency relief systems and devices.     

Detonation characteristics of ammonium nitrate and activated carbon mixtures

To better understand the detonation characteristics of ammonium nitrate (AN) and activated carbon (AC) mixtures, steel tube tests were carried out for AN/AC mixtures of various compositions and different forms of AN (powdered, prilled, phase stabilized and granular), and the detonation velocity was measured. The powdered AN/AC mixtures gave higher detonation velocities than the other AN forms. For all the AN/AC mixtures, the experimentally observed detonation velocities at each loading density were far below the theoretically predicted values calculated by the CHEETAH code based on thermohydrodynamics, exhibiting so-called non-ideal detonation. The lowest detonation velocity of powdered AN/AC mixtures was obtained as D=1.25 km/s for an AC content of 0.1 wt%. This was considered to be close to the critical condition for stable detonation.