车门框条滚压成形工艺及滚压线设计

以X110型车门为例,分析零件工艺性,介绍滚压成形工艺过程,强调在模具设计和制作中应注意的问题。设计由滚压、校正、滚焊和自动断料等工艺流程组成的滚压线,可作为类似滚压工艺参考。     

Human appropriation of net primary production as determinant of avifauna diversity in Austria

The relationship between land-use induced changes in production ecology and avifauna diversity was analysed using a GIS land cover dataset on a 0.25 km × 0.25 km grid covering Austria's national territory. Considering only aboveground processes, the “human appropriation of net primary production” (HANPP = potential NPP − NPP_t), actual NPP (NPP_act), harvest (NPP_h) and NPP_t (= NPP_act − harvest) were recalculated based on existing datasets. Elevation as well as indicators of land cover heterogeneity and landscape heterogeneity were also considered. Correlation analyses were performed between these potential determinants of avifauna diversity and breeding bird species richness data as well as the percentage of endangered breeding birds included in the Austrian red list. Four spatial scales—0.25 km × 0.25 km, 1 km × 1 km, 4 km × 4 km and 16 × 16 km, were analysed. It was shown that breeding bird species richness was more strongly correlated with production ecological indicators and elevation than with heterogeneity indicators. A residual analysis in which the effect of elevation (a proxy for climate) on species richness and its potential determinants was removed confirmed the importance of the availability of trophic energy (NPP) for bird diversity patterns. The results support the species-energy hypothesis, thus confirming the notion that HANPP could be a useful pressure indicator for biodiversity loss.     

压盖落料冲孔成形模设计

介绍了在尺寸公差及形位公差要求较高的落料冲孔成形件的模具设计过程中，不降低劳动效率的情况下，如何使模具简化、降低模具成本，并使冲压件满足其设计要求。     

环境承载力与环境扶贫

随着人类环境意识的觉醒与升华，引发了对自身生存环境的更深层次的思考。本文就环境承载力的内涵与外延以及它既会造成贫困又可解脱贫困的关键作用进行了研究和探讨。     

磷肥厂烘干磨高压静电除尘技术及应用

本文根据高压静电除尘的原理,磷肥厂烘干磨粉尘的特性分析,以及作者本人的工作实践,探讨了高压静电除尘技术在磷肥厂烘干磨粉尘治理中应用的可行性。     

On the thermal rupture of 1.9 m propane pressure vessels with defects in their thermal protection system

This paper describes the results from a series of fire tests that were carried out to measure the effect of defects in thermal protection systems on fire engulfed propane pressure vessels.

In North America thermal protection is used to protect dangerous goods rail tank-cars from accidental fire impingement. They are designed so that a tank-car will not rupture for 100 min in a defined engulfing fire, or 30 min in a defined torching fire. One common system includes a 13 mm blanket of high-temperature ceramic fibre thermal insulation covered with a 3 mm steel jacket. Recent inspections have shown that some tanks have significant defects in these thermal protection systems. This work was done to establish what levels of defect are acceptable from a safety standpoint.

The tests were conducted using 1890 l (500 US gallon) ASME code propane pressure vessels (commonly called tanks in the propane industry). The defects tested covered 8% and 15% of the tank surface. The tanks were 25% engulfed in a fire that simulated a hydrocarbon pool fire with an effective blackbody temperature of 870 °C.

The fire testing showed that even relatively small defects can result in tank rupture if the defect area is engulfed in a severe fire, and the defect area is not wetted by liquid from the inside. A wall failure prediction technique based on uniaxial high-temperature stress rupture test data has been developed and agrees well with the observed failure times.     

压力容器制造监检中对若干问题的处理

针对压力容器制造监检中某些受检单位在法规标准的理解上存在误区或者疏忽、不知如何进行后续整改工作的现状,笔者结合多年压力容器监督检验的工作经验,提出自己的解决方案,以供参考,也希望广大读者在遇到类似情况时能够正确理解并执行相关法规标准.     

氨制冷压力容器定期检验相关问题分析

随着大量制冷装置的建成和使用,氨制冷企业安全问题日益突出,定期检验作为保证在役氨制冷压力容器安全使用的一个重要环节,目前仍存检验依据不清、检验项目不明、检验针对性不足等问题.文中对氨制冷压力容器定期检验现状进行了介绍,对氨制冷压力容器损伤机理进行了分析和讨论,从损伤模式判别的角度提出了相应的检验策略,给相关人员提供一些...     

Rainfall Interception Based on Indirect Methods: A Case Study in Temperate Forests in Oaxaca,Mexico

Rainfall interception represents the amount of water trapped in natural cover that is not drained directly to the ground. Intercepted rainfall may evaporate after a rain event, making it one of the main drivers of water balance and hydrologic regionalization. This process can be affected by factors such as climate, altitude, vegetation type, and topography. Here is a simple method of calculating rainfall interception in temperate forests using in Santa Maria Yavesia, Oaxaca, and Mexico as an illustrative study area. We used two rain gauges to measure net precipitation (N_p) under the canopy at each study site and one gauge outside the canopy to obtain gross precipitation (G_p). Throughfall (T_h) was indirectly measured using hemispherical photographs. Rainfall interception was obtained through a combination T_h and G_p and N_p. The mean rainfall interception was 50.6% in the Abies forests, 23%–40% in the coniferous‐mixed forests, and 27.4% in the broad‐leaved forests. We classified rainfall events by intensity to determine the effect of canopy structure and precipitation and found that 75% of the events were weak events, 24% were moderate events, and 1% were strong events. In addition, we found that rainfall interception was lower when the intensity of precipitation was higher. Our method can be replicated in different ecosystems worldwide as a tool for assessing the influence of rainfall interception in terms of ecological services.     

南京理工大学高压实验室及其研制高压水射流切割机

南京理工大学高压实验室自８０年代初建立以来，在高压容器及武器发射管的自紧理论和工程应用、高压零部件研制、高压传感器和信号放大显示系统、高压介质等方面做了大量的工作。９３年以来，进行了水射流切割机的研制工作，解决了超高压缸体的动态密封、高压缸体的自增强、无触点式换向传感器、内衬不锈钢组合型高压容器等诸多问题，试制成功了水射流切割机样机。