Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

Spatial cost efficiency in waste paper handling: the case of corrugated board in Sweden

This paper analyzes the spatial cost efficiency of the Swedish legislation regarding waste disposal handling. We focus on the case of corrugated board and recognize that the different counties in Sweden possess different economic prerequisites in terms of waste paper recovery and utilization potential. We employ data for six corrugated board mills and 20 counties and a non-linear programming model to identify the least cost strategy for reaching the politically specified recycling target of a 65% recovery rate for corrugated board. That is, the total costs of recovering a minimum of 65% in each county are calculated and compared with the case when the country as a whole recovers 65% of all old corrugated board is collected but there exist no uniform target for each county. The conclusion is that from an efficiency point of view the recovery efforts should be concentrated to the highly populated and urbanized counties, and not be uniformly divided throughout the country. In the base case, the results suggest that the cost efficient county-specific recovery rates should range from 51 to 72%.     

住宅小区中水回用工程实例

为使某住宅小区居民生活污水达到中水回用的要求，采用曝气生物滤池一过滤工艺进行处理，并介绍了相关工艺参数：运行结果表明，采用该工艺出水水质全部达到《城市污水再生利用景现环境用水水质》中观赏性景观环境用水标准。该工艺可以作为住宅小区中水回用的一种选择方案。     

Eco-environmental information system of Tianjin City─Design, implementation and applications

Ｅｃｏ－ｅｎｖｉｒｏｎｍｅｎｔａｌｉｎｆｏｒｍａｔｉｏｎｓｙｓｔｅｍｏｆＴｉａｎｊｉｎＣｉｔｙ─Ｄｅｓｉｇｎ，ｉｍｐｌｅｍｅｎｔａｔｉｏｎａｎｄａｐｐｌｉｃａｔｉｏｎｓＨｕＸｉａｏｌｉｎ；ＹａｎｇＢａｎｇｊｉｅ；ＺｏｎｇＹａｏｇｕａｎｇ；ＬｕＬｉ（Ｒ...     

基于资源最优化回收的再制造工程

从对寿命末端产品的处理选择分析出发，建立了末端产品回收梯级模型，提出基于最优化产品末端回收选择的再制造工程回收的附加值最大，环境污染最小，综合效益最高，并分析了再制造在产品全寿命周期各阶段所发挥的重要作用。     

废旧锂离子电池回收利用的研究现状

目前废旧锂离子电池的回收利用，重点是电极材料中有价金属的回收，主要是应用酸浸和溶剂萃取相联合的湿法冶金技术，其次将电化学技术用于浸出液中金属的沉积和对失效电极材料的直接修复也有相关的研究报导。根据锂离子电池的发展和未来的环境要求，今后的回收利用将朝综合处理和多元化处理技术的方向发展。     

The economics of tire remanufacturing

The world market for tires is described to identify the current material flow from raw materials to tires and the used tire disposal problem. Then, I describe the value-adding operations in the tire production process and in the tire retreading process. Once retreading is identified as the only recovery alternative that maximizes tire utilization, I explain why heat generation is the only recovery alternative, when retreading is not technically feasible. The economic values of heat generation in electric plants and in cement kilns are discussed. The paper culminates with the case of retreading, the tire remanufacturing process and the recommendation of a simple decision rule for selecting the number of times a tire should be retreaded to maximize its utilization.     

Current status and research on E-waste issues in Asia

Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both 3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently, managing electrical and electronic waste (E-waste) has become an important target for domestic and international material cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of future research and possible collaborations are also discussed.     

Botswana's environmental policy on recycling

Recycling operations have become one of the primary strategies for waste management, worldwide. Especially, recycling operations are viewed as among the most effective techniques for reducing the amount of municipal solid waste disposed at landfill sites. Botswana's environmental policy on recycling stipulates, among others, that all waste management authorities should provide information on the classification and quantities of controlled waste targeted for recycling. This paper, therefore, examines the extent to which recycling operations in Botswana have either been conducted in compliance with or in violation of some major environmental requirements as enunciated on statutory guidelines. Compatibility between environmental policies on recycling and actual practice is evaluated focusing on two companies (Dumatau trading and Botswana Tissue) involved in recycling operation. Data from the two companies is complemented by one collected from the Gaborone landfill site. Finally, this study discusses on the role played by various stakeholders in policy formulation and implementation with particular emphasis being placed on a select number of non-governmental organisations (NGO).     

Recycling of high purity selenium from CIGS solar cell waste materials

Copper indium gallium diselenide (CIGS) is a promising material in thin film solar cell production. To make CIGS solar cells more competitive, both economically and environmentally, in comparison to other energy sources, methods for recycling are needed. In addition to the generally high price of the material, significant amounts of the metals are lost in the manufacturing process. The feasibility of recycling selenium from CIGS through oxidation at elevated temperatures was therefore examined. During oxidation gaseous selenium dioxide was formed and could be separated from the other elements, which remained in solid state. Upon cooling, the selenium dioxide sublimes and can be collected as crystals. After oxidation for 1 h at 800 °C all of the selenium was separated from the CIGS material. Two different reduction methods for reduction of the selenium dioxide to selenium were tested. In the first reduction method an organic molecule was used as the reducing agent in a Riley reaction. In the second reduction method sulphur dioxide gas was used. Both methods resulted in high purity selenium. This proves that the studied selenium separation method could be the first step in a recycling process aimed at the complete separation and recovery of high purity elements from CIGS.