煤矸石的综合利用研究

探讨了大同煤矸石、开滦唐山矿煤矸石的增白工艺 ,对酸浸脱杂的温度、酸浓度及煅烧工艺制度进行了深入研究。结果表明 ,大同煤矸石、唐山矿煤矸石可用于作造纸涂料级高岭土 ,白度可达 92以上。本研究为煤矸石的综合利用提供了很好的途径     

活性炭催化过氧化氢去除荧光增白剂

研究了活性炭(activated carbon,AC)吸附、改性活性炭(activated carbon modified,ACM)吸附、过氧化氢(H2O2)氧化、AC催化H2O2等方法对水体中荧光增白剂VBL的处理效果,并通过自由基俘获剂叔丁醇、催化过程气体分析等探讨了AC催化H2O2分解VBL的机制.结果表明,经硝酸铁[Fe(NO3)3]改性过的ACM对VBL的吸附去除率高于未改性的AC.活性炭催化H2O2对VBL的去除效果明显,但未改性AC催化去除率高于ACM.60 min时,AC催化氧化去除率即可达到95%以上,而ACM仅为58%.叔丁醇的加入降低了AC和ACM催化氧化对VBL的去除率,表明AC催化H2O2氧化能促进H2O2形成羟基自由基(·OH)和原子氧参与反应.AC催化H2O2分解及释放气体分析表明,AC能催化H2O2形成氧气并放热,且ACM明显快于AC.结合催化H2O2去除VBL效率的结果分析,ACM催化反应时活性中间物(自由基和原子氧等)产生速率快于AC,活性中间物自身消耗形成氧气,而不是用于分解VBL.催化反应中活性中间产物的形成速率与反应物供给速率的不匹配可能是导致ACM催化效果弱于AC的重要原因.     

A robust approach for iterative contaminant source location and release history recovery

Contamination source identification is a crucial step in environmental remediation. The exact contaminant source locations and release histories are often unknown due to lack of records and therefore must be identified through inversion. Coupled source location and release history identification is a complex nonlinear optimization problem. Existing strategies for contaminant source identification have important practical limitations. In many studies, analytical solutions for point sources are used; the problem is often formulated and solved via nonlinear optimization; and model uncertainty is seldom considered. In practice, model uncertainty can be significant because of the uncertainty in model structure and parameters, and the error in numerical solutions. An inaccurate model can lead to erroneous inversion of contaminant sources. In this work, a constrained robust least squares (CRLS) estimator is combined with a branch-and-bound global optimization solver for iteratively identifying source release histories and source locations. CRLS is used for source release history recovery and the global optimization solver is used for location search. CRLS is a robust estimator that was developed to incorporate directly a modeler's prior knowledge of model uncertainty and measurement error. The robustness of CRLS is essential for systems that are ill-conditioned. Because of this decoupling, the total solution time can be reduced significantly. Our numerical experiments show that the combination of CRLS with the global optimization solver achieved better performance than the combination of a non-robust estimator, i.e., the nonnegative least squares (NNLS) method, with the same solver.     

US/UV联用降解荧光增白剂CBW的研究

对超声波、紫外联用技术降解荧光增白剂的反应进行研究，考察了辐射时间、超声功率、pH、H2O2投加量等因素对降解效率的影响。结果表明：荧光增白剂的降解效率受辐射时间影响较大，降解过程符合拟一级反应I提高超声波的功率可提高荧光增白剂的降解率；H2O2的添加，可使溶液中的氢氧自由基的浓度增加，从而提高了荧光增白剂的降解率。在初始浓度为40mg／L，超声功率为500w、pH为9、H2O2的添加量为30mL／L、反应120min的条件下，荧光增白剂的降解率可达95％。     

稳健GM(1,1)模型在工业固废产生量预测中的应用

本文提出了稳健灰色模型,并用该模型建立了山东省工业固体废物产生量数学模型。结果表明,稳健ＧＭ（１,１）模型比通常的ＧＭ（１,１）模型更具预测应用价值。     

TiO2@酵母微球吸附废水中的荧光增白剂-VBL及再生研究

采用静电自组装的方法制备出具有草莓结构的TiO2@酵母微球作为吸附材料,对阴离子型荧光增白剂-VBL(FWA-VBL)废水进行吸附研究,考察了溶液pH、溶液初始浓度和TiO2@酵母投加量对吸附效果的影响.结果表明,酸性条件有利于TiO2@酵母微球对FWA-VBL的吸附,平衡吸附量随着溶液初始浓度的增加而增加,随着TiO2@酵母微球投加量的增加而减小.TiO2@酵母对FWA-VBL的吸附行为更加符合Langmuir等温模型,在温度为323.15K下最大吸附量为167.50mg/g; 吸附动力学符合二级动力学方程; 热力学参数表明吸附过程是自发的吸热过程.归因于光催化-吸附耦合效应,TiO2@酵母微球展现出了良好的原位再生能力.H2O2的添加有助于提高TiO2@酵母微球的再生性能.     

A new fault detection method for non-Gaussian process based on robust independent component analysis

Conventional fault detection method based on fast independent component analysis (FastICA) is sensitive to outliers in the modeling data and thus may perform poorly under the adverse effects of outliers. To solve such problem, a new fault detection method for non-Gaussian process based on robust independent component analysis (RobustICA) is proposed in this paper. A RobustICA algorithm which can effectively reduce the effects of outliers is firstly developed to estimate the mixing matrix and extract non-Gaussian feature called independent components (ICs) by robust whitening and robust determination of the maximum non-Gaussian directions. Furthermore, a monitoring statistic for each extracted IC is constructed to detect process faults. Simulations on a simple example of the mixing matrix estimation and a fault detection example in the continuous stirred tank reactor system demonstrate that the RobustICA achieves much higher estimation accuracy for the mixing matrix and the ICs than the commonly used FastICA algorithm, and the RobustICA-based fault detection method outperforms the conventional FastICA-based fault detection method in terms of the fault detection time and fault detection rate.     

金属有机骨架MIL-68(Al)对水中典型荧光增白剂VBL的吸附去除

以金属有机骨架材料MIL-68(Al)为吸附剂,探究其对水中典型荧光增白剂VBL分子的吸附行为.采用粉末X射线衍射仪(XRD)、傅里叶变换红外光谱(FTIR)、场发射扫描电镜(SEM)及N_2吸附脱附对MIL-68(Al)的结构性质进行表征.探讨了p H值、离子强度、污染物初始浓度、反应温度及吸附时间对MIL-68(Al)吸附去除水中VBL的影响,并对吸附等温线、动力学、热力学及吸附机制进行了分析.实验结果表明,MIL-68(Al)对VBL的吸附能适应较宽的p H范围,吸附等温线符合Langmuir模型,最大吸附容量达到400.02 mg·g~(-1);吸附速率在前20 min很快,并且能在180 min达到吸附平衡,吸附动力学符合准二级动力学模型;吸附过程是吸热反应,吸附自发进行并且主要由熵驱动;静电作用和氢键作用对吸附均有贡献,静电作用是吸附发生的主要机制.由以上结果可知,MIL-68(Al)是一种潜在的高效吸附剂,在去除水中的VBL分子方面极具潜力.     

基于灰色层次分析法的突发事件应急管理能力评价

突发事件的频发,使得对应急能力的评价备受关注。首先按照应急管理能力评价指标的选取原则,构建了突发事件应急管理能力评价指标体系。然后利用层次分析法确定各评价指标的权重系数,采用专家打分法建立评价指标集,运用灰色系统理论计算评分,进而建立了适用于突发事件应急管理能力的灰色层次分析评价模型。最后对某区域的突发事件应急管理能力进行实例分析,在定量计算的基础上,对其应急能力进行缺陷诊断,并提出措施建议,为完善应急能力提供科学有效的依据。     

荧光增白剂生产废水不同预处理方法的比较

采用Fenton试剂氧化、O3氧化、曝气铁炭微电解3种方法对荧光增白剂生产废水进行了处理,考察了不同影响因素对3种处理方法处理效果的影响.结果表明,在H2O2投加量为0.13 mol/L、H2O2与Fe2+的物质的量比为20、pH值为5.0、反应时间为1.0h时, Fenton试剂氧化处理效果最好,CODCr去除率达到39.9%, BOD5/CODCr提高到0.51.在反应时间为70min(O3通入量为2.51 g/L)、pH值为9.2时,O3氧化处理效果较好,CODCr去除率达到36.7%,BOD5/CODCr提高到0.47.在铁炭质量比为1、反应时间为2.0h、pH值为2.5时,曝气铁炭微电解效果最好,CODCr去除率达到57.1%,BOD5/CODCr提高到0.45.3种预处理方法均可有效降解荧光增白剂生产废水中的有机物并且提高废水的可生化性,其中曝气铁炭微电解的效果最好,处理成本最低,可以应用于荧光增白剂生产废水的处理中.