A stochastic approach for risk analysis in vapor cloud explosion

A stochastic approach for evaluating the risk of vapor cloud explosions is proposed in this work. The proposed methodology aims to incorporate the effect of uncertainty into the risk analysis to produce a better overall view for the risk. Some stochastic variables are used to estimate the probability of vapor cloud explosions: frequency of the release, the probability of not having an immediate ignition, the probability of delayed ignition and the probability of a vapor cloud explosion given a delayed ignition, as well as different possible meteorological conditions. These stochastic variables are represented with probability distribution curves. Different curves for the frequencies of releases from process equipment types (steel process pipes, flanges, manual valves, actuated valves, etc.), different equipment diameters and different leak sizes are also used in this analysis. Monte Carlo simulation is performed to obtain the risk as a probability distribution using the Analytic Solver Platform. Then the risk distribution curve obtained by Monte Carlo simulation is used to estimate the probability of satisfying the risk tolerance criterion.     

COMPARISON OF STOCHASTIC AND DETERMINISTIC DYNAMIC PROGRAMMING FOR RESERVOIR OPERATING RULE GENERATION1

ABSTRACT: Two dynamic programming models — one deterministic and one stochastic — that may be used to generate reservoir operating rules are compared. The deterministic model (DPR) consists of an algorithm that cycles through three components: a dynamic program, a regression analysis, and a simulation. In this model, the correlation between the general operating rules, defined by the regression analysis and evaluated in the simulation, and the optimal deterministic operation defined by the dynamic program is increased through an iterative process. The stochastic dynamic program (SDP) describes streamflows with a discrete lag-one Markov process. To test the usefulness of both models in generating reservoir operating rules, real-time reservoir operation simulation models are constructed for three hydrologically different sites. The rules generated by DPR and SDP are then applied in the operation simulation model and their performance is evaluated. For the test cases, the DPR generated rules are more effective in the operation of medium to very large reservoirs and the SDP generated rules are more effective for the operation of small reservoirs.     

Spatial cost efficiency in waste paper handling: the case of corrugated board in Sweden

This paper analyzes the spatial cost efficiency of the Swedish legislation regarding waste disposal handling. We focus on the case of corrugated board and recognize that the different counties in Sweden possess different economic prerequisites in terms of waste paper recovery and utilization potential. We employ data for six corrugated board mills and 20 counties and a non-linear programming model to identify the least cost strategy for reaching the politically specified recycling target of a 65% recovery rate for corrugated board. That is, the total costs of recovering a minimum of 65% in each county are calculated and compared with the case when the country as a whole recovers 65% of all old corrugated board is collected but there exist no uniform target for each county. The conclusion is that from an efficiency point of view the recovery efforts should be concentrated to the highly populated and urbanized counties, and not be uniformly divided throughout the country. In the base case, the results suggest that the cost efficient county-specific recovery rates should range from 51 to 72%.     

Economic and Spatial Impacts of an Existing Reserve Network on Future Augmentation

An optimization model for land reservation was developed that explicitly selects parcels in the most compact or contiguous manner possible while meeting habitat requirements and a budget limitation. The model was used to compare the effects of an existing reserve network on future parcel spatial locations and total cost. Using habitat and land value data from Josephine County, Oregon, it was found that a system of existing reserves created by various policies and overseen by different agencies can decrease future reserve compactness and contiguity, and increase total cost. This work suggests that coordinated planning can result in more efficient conservation efforts for less cost.     

Modelling of Materials Policies

This paper discusses the REAP1 model and its application for the analysis of CO₂ reduction and waste management policies for Japanese petrochemicals. The pros and cons of this modelling approach in comparison to other tools is elaborated. This is followed by a discussion of the model code and the modelling results. The results show that CO₂ policies can have significant impacts on waste flows and waste policies can have significant CO₂ benefits. As a consequence both effects must be considered in policy assessment. Pricing instruments are recommended instead of regulations because of the complex physical relations in the materials life cycle that extend beyond sector boundaries. A taxation approach is superior to a subsidy approach because rebound effects can be avoided.     

区域环境风险研究进展探讨

主要围绕国内外在区域环境风险领域的研究进展、趋势与不足进行分析评述,在此基础上提出了进行区域环境风险水平及阈值研究,并进行动态调控的研究新思路。     

旅游城市环境规划优化方法与应用研究(Ⅰ)不确定性多目标规划模型

以旅游城市环境系统的综合性、多目标性、动态性和不确定性的特征出发，提出用不确定性模糊多目标规划（IFMOP）模型来解决旅游城市 环境规划优化问题。通过建立旅游城市环境不确定性模糊多目标规划系统模型（IFMOPMTCE），使旅游城市环境系统的特性在模型建立和求解过程中得以充分反映，同时也有效地协调了环境经济等目标之间的矛盾与冲突，该研究为旅游城市环境规划工作提供了一种较为有力的工具。     

随机模拟在常州运河水质规划中的应用

以常州运河的水质规划为实例,讨论了确定性水质模型的随机模拟。讨论中引进了主观概率和客观概率的概念,用泰勒级数确定客观概率分布,用可能最大机率法估计主观概率分布,并给出了在实施不同规划方案时的水质概率曲线和水质达标的保证率。计算结果表明,使水质恶化的各种随机因素的作用不容忽视,各种水污染治理措施只能降低水质超标的风险水平。     

战略环境影响评价程序设计的探讨

政策是分阶段作用于生态环境的规律,故可将战略环境影响评价分析程序分为三个分程序①政策审查分析和生态评价;②政策与生态环境相互作用的作用机制和作用网络分析程序 ;③政策环境影响量化和计算程序.对每个分程序的分析原理、依据、方法、技术、手段、步骤进行了简明扼要地分析.