油品储运过程挥发损耗测算与分析

通过对燕化公司油品储运情况的调查，测算其油品储运过程中的挥发损耗，并提出了有关的防治措施。     

利用电除尘器降低蓄电池生产中铅尘排放量研究

阐述了利用电除尘器降低蓄电池铅尘排放量的方法和效果     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

石化管道储运员工心理评估结果分析

目的:了解石油管道储运员工的心理健康现状,建立管道储运员工症状自评量表(SCL-90)的群体常模。方法:运用整群抽样方法和症状自评量表(SCL-90)对5544名中国石化管道储运公司员工进行心理健康状况调查,将SCL-90结果与中国常模比较。结果:本次调查心理健康状况好3947人,占71.2%;心理健康状况良好1299人,占23.4%;心理健康状况一般238人,占4.3%;心理健康状况异常60人,占1.1%;石化管道储运员工在躯体化、焦虑、精神病性、阳性项目数均分显著高于全国常模;人际关系、敌对、偏执和精神病性因子均分男性显著高于女性,恐怖因子均分女性显著高于男性;35岁及以上组的躯体化、强迫、抑郁、焦虑、敌对、恐怖、精神病性以及阳性项目数的因子均分均高于35岁以下组;大专组和高中及以下组各项因子均分均显著高于本科及以上组。结论:管道储运员工心理健康状况低于一般人群。年龄相对较大以及学历相对较低员工的心理健康状况是企业关注的重点。     

合流制排水系统溢流污染就地调蓄处理控制技术研究

在对高效混合絮凝斜板沉淀工艺进行现场中试的基础上,将化学强化处理工艺与调蓄池相结合,针对上海市某合流制排水系统,进行调蓄/沉淀池的概念设计,提出主要设计参数,利用计算流体力学(CFD)模型对调蓄/沉淀池进行优化设计.试验和模拟结果表明,调蓄/沉淀池与单纯的调蓄池相比具有更好的溢流污染控制效果和效益/造价比.     

火电厂CO2捕集与封存技术探讨

火电厂CO2减排技术主要包括燃烧前处理、燃烧中减排及燃烧后捕集三类。介绍了IGCC、富氧燃烧、胺吸收法、生物法等CO2捕集与封存技术,分析其存在问题及应用前景。     

Lay concepts on CCS deployment in Switzerland based on qualitative interviews

Laypeople's acceptance and perception of Carbon Dioxide Capture and Storage (CCS) can have an influence on its political feasibility. It is important, therefore, to study how laypeople perceive CCS and which cognitions they hold with respect to this technique. We conducted in-depth interviews with laypeople (N = 16) to explore their mental concepts of CCS. Little knowledge about CCS was detected among laypeople. We also found that laypeople fear that a deployment of CCS could create incentives that would hinder a sustainable development of the energy economy. A misunderstanding of the concepts of hydro- and geostatic pressure, as well as a lack of knowledge about the physical–chemical properties of carbon dioxide seemed to trigger fundamental rejection of CCS among some laypeople. This qualitative study identifies concepts that underlie CCS perception, and these should be objects of future studies. We provide some suggestions for risk management and communication about CCS.     

池火灾热辐射下的最小安全距离

防火间距是石油化工企业平面设计中的一个重要参数 ,笔者旨在从流体力学角度研究池火灾发生情况下邻罐之间最小安全距离 ,从而给防火间距的制定提供依据。辐射是储罐区池火灾的主要传热方式 ,作者对池火灾形状以及介质辐射吸收性质进行了适当的简化 ,用CFD软件Fluent对丙烷液化烃储罐池火灾热辐射进行了数值模拟。模拟结果表明对于锰钢材料、内径为 1 2 4 1 0mm液化烃压力储罐 ,稳态池火灾情况下 ,相邻两储罐之间的最小安全距离为 1 5m。     

Diatom Thalassiosira weissflogii in oligotrophic versus eutrophic culture: models and ultrastructure

Populations of marine diatom Thalassiosira weissflogii were grown in continuous cultures enriched with f/2 medium. One of the two contrasting cultures (‘eutrophic’) received 5.6 times more nutrients than the other (‘oligotrophic’). Two mathematical models are analyzed to estimate eutrophication differences. The second model based on the Michaelis–Menten uptake and Droop growth shows that cells in the eutrophic culture should have about 56% higher content of silica which is the limiting nutrient. Diatom samples were prepared for the transmission electron microscopy after cells have been kept in chemostats for 37 days. The structure of diatom cells was investigated and a comparison is made between cells grown in oligotrophic and eutrophic conditions. In eutrophic culture, dividing cells were encountered more frequently while cell concentration was approximately equal in both chemostats. The central vacuole of cells in eutrophic culture accumulated dispersed and compact material from amorphous to spherical shape. In some cells the large central vacuole had fibrilar and peppered dense materials in addition to translucent granules, vesicules and multivesicular bodies. In the cytoplasm we found increased number of multivesicular bodies, dense and lucent granules some of which enclose membrane particles and lucent vesicules. Dense material depositions observed in the vacuole are also seen in the cytoplasm associated with organelles, mitochondria and plasmalemma. Cells have well-developed, active and slightly increased number of dictyosomes (5–6). Some dictyosomes with dense secretory material in the cistern are apparently engaged in a granule formation process. Functional significance of dense material in the central vacuole, which has not been observed in cells grown in oligotrophic condition, is discussed.     

Self-ignition tendency of solid fuels: A gas emissions approach for early detection

Self-ignition of solid fuels storage is one of the main causes of human and economic losses. Additionally, each fire caused by this phenomenon emits an amount of toxic gases that contributes on the development of climate change. Nowadays, several methodologies are used in order to detect the self-ignition tendency of solid fuels, but they have as main disadvantages the amount of money and time that they require. The aim of this study is to propose a methodology of detection of incipient self-ignition of solid fuels through the measurement of gas emissions. This study compares existing methodologies to detect self-ignition tendency, such as TG, DSC or susceptibility, and to combustion related gas emission results. Different methods have been used to evaluate the results from the gas emission test, showing that interval and inflexion methods provide early detection of the self-heating process. With this methodology, it is possible to determine this process in advance with the equipment currently available in every industrial facility, reducing costs and improving efficiency.