高烈度地震区隧道软硬围岩交接段刚柔并济抗减震技术研究*

为提高高烈度地震区隧道抗震性能，以某铁路隧道为研究背景，分析3种抗减震措施下隧道不同监测点隧道拱顶沉降、边墙收敛、衬砌结构PGA及最小安全系数，通过对比分析得到最优抗减震措施。结果表明:相比于工况1，工况2隧道拱顶沉降减小10.54%~81.10%，边墙收敛减小13.92%~78.77%，衬砌结构PGA减小31.42%~72.02%，最小安全系数增加18.04%~66.13%；相比于工况1，工况3结构拱顶沉降减小3.04%~18.02%，边墙收敛减小4.70%~32.00%，PGA增加13.95%~27.48%，最小安全系数增加7.49%~30.99%；工况4即“减震层+SFRC衬砌”刚柔并济法，相比于工况1，隧道拱顶沉降减小18.46%~83.98%，结构边墙收敛减小17.54%~85.47%，PGA减小30.00%~69.98%，最小安全系数增加47.95%~83.56%；4种工况抗减震性能由高到低依次为:工况4＞工况2＞工况3＞工况1。研究结果可为隧道软硬围岩交接段抗震设防提供理论参考。     

A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

防灾预案研究

本文提出了防御灾害预案的五要素和逻辑结构,进而讨论了防灾预案的优化准则、制定程序等问题。     

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

贵阳地区基本地质环境和主要岩土工程问题综述

本文系笔者对贵阳地区主要地质环境和工程地质特点进行的初步总结,内容为贵阳地区主要岩土构成情况、分布范围及与之相应的岩土工程地质特点和主要的岩土工程地质问题的描述,旨在给同行提供宏观性的了解和方向性的参考。     

地震安全性评价工作在城市建设中的重要作用

地震安全性评价工作在城市建设中起着非常重要的作用,为工程抗震提供精确的设计依据,提供科学合理的地震动参数,提出科学合理的设防要求,能够在一定程度上避免破坏性地震造成的损失,从而达到有效减灾的目的。     

A profile of environmental science in China

This paper concisely introduced the eco-environmental survey in China and the Chinese scientific programme for environmental research which is being practiced or being planned. China has established a nation-wide system relating to environmental scientific research and environmental administration and has taken the following strategies for solving the environment problems: (1) a series of laws and regulations for environmental protection has been promulgated so as to strengthen the legal administration and economic punishment. (2) the idea of ecological construction has been proposed for the purpose of taking the environmental protection work into the consideration of the national and provincial (or regional) economic construction planning. (3) spreading ecological engineering and ecological technologies have reduced the pollutant sources and have increased the industrial and agricultural economic profit.     

A regional environmental management information system for Chinese EPA—the system analysis and design

REMIS is one of key research projects sponsored by the central government. It is recommended to regional EPAs as a main tool of the environmental management. REMIS simulates the functions of the regional EPAs and aimed to improve their management level. The national environmental management information system will base on REMIS.Functional analysis is the kernel of the REMIS system analysis. Data and data flow analysis are used to support the functional analysis.Investigations on the functions of the local EPAs of eight provinces and 12 cities have been taken. The functions were carefully sorted. Modular design method was used in system analysis and system design.The system analysis included functional analysis, data analysis and data flow analysis. The system design is based on the system analysis. HIPO diagram of each modular, data base structure, menu design, selection of hardware and software environment were the main items of the system design.     

辽宁省白石水库环境工程地质问题综述

白石水库位于辽宁省北票市上园乡附近的大凌河干流上,是大凌河流域第一期开发的控制性骨干工程，水库建成后，将产生许多环境工程地质问题。从库坝区的地质背景出发，对水库渗漏、库岸再造与泥沙淤积、淹没与浸没、水库诱发地震、坝下冲刷坑稳定性等主要环境工程地质问题进行了综合评述。     

高浓印染废水处理工程的设计审计与运行结果分析

通过对漂染厂生产工艺过程及排废状况进行审计研究，提出了有针对性的废水处理工艺流程，区别对待废水浓度、污染物成分、化学作用及其工艺原理，实现了废水处理各工艺段的适配与综合节能的协调，在保证废水高效达标处理的前提下使工程优化