The importance of temperature in assessing iron pipe corrosion in water distribution systems

Temperature is expected to play a significant role in the corrosion of iron pipes in drinking water distribution systems. Temperature impacts many parameters that are critical to pipe corrosion including biological activity, physical properties of the solution, thermodynamic and physical properties of corrosion scale, and chemical rates. Moreover, variations in temperature and temperature gradients may give rise to new corrosion phenomena worthy of consideration by water treatment personnel.     

大型车车身覆盖件冲压成形特征分析及选材研究

为满足大型车身覆盖件冲压成形要求并实现钢板与零件的对路供应 ,必须在深入解析零件成形特征的基础上 ,确定高应变部位的成形敏感材料参数。在材料力学性能测试和成形极限分析的基础上 ,对侧围外板的冲压成形特征和成形敏感参数进行了分析。结果表明 :侧围外板零件高应变部位的变形方式为胀形 深拉延变形 ,n值和r值为影响侧围外板零件成形的主要材料敏感参数     

Comparison of mesophilic and thermophilic anaerobic digestions of thermal hydrolysis pretreated swine manure: Process performance, microbial communities and energy balance

Anaerobic digestion (AD) of swine manure (SM) commonly shows low biogas output and unsatisfactory economic performance. In this study, thermophilic AD (TAD, 50 ± 1 °C) was combined with thermal hydrolysis pretreatment (THP, 170 °C/10 bar), to investigate its potential for maximizing biogas yield, securing successful digestion and microbial diversity, as well as improving energy balance. Four lab-scale continuously stirred tank reactors were operated for 300 days and compared with each other, i.e., reactor 1 (raw SM fed in mesophilic AD: RSM-MAD), reactor 2 (THP-treated SM fed in MAD: TSM-MAD), reactor 3 (RSM-TAD), and reactor 4 (TSM-TAD). The results showed that THP was efficient to increase methane production of SM, TSM-TAD mode led to the highest methane yield (129.8 ± 40.5 mL-CH₄/g-VS/day) among the tests (p < 0.05). Although TAD was more likely to induce free ammonia (> 700 mg/L) or volatile fatty acids (> 6000 mg/L) accumulation compared with MAD in start-up phase, TSM-TAD treatment mode behaved a sustainable digestion process in a long-term operation. For TSM-TAD scenario, higher Shannon–Weaver (3.873) and lower Simpson index (0.061) indicated this mode ensured and enlarged the diversity of bacteria communities. Phylum Bathyarchaeota was dominant (59.3%−90.0%) in archaea community, followed by Euryarchaeota in the four reactors. RSM-MAD treatment mode achieved the highest energy output (4.65 GJ/day), TSM-TAD was less effective (−17.38 GJ/day) due to increased energy demands. Thus improving the energetic efficiency of THP units is recommended for the development of TSM-TAD treatment mode.     

基于风险的检验在高温高压管廊蒸汽管道的应用

高含硫天然气净化装置高温高压管廊蒸汽管道由于不能停车,在现有技术条件下无法开展全面检验,存在安全运行的风险。简述了基于风险的检验技术的基本理念。讨论了蒸汽管道开展基于风险的检验的合规性、损伤模式及机理、风险评估方法和程序。通过综合考虑失效可能性和失效后果,制定最优检验策略并实施,解决了高温高压管廊蒸汽管道到期不能检验的问题,及时发现隐患并整改,确保管道合法合规安全运行。研究结果表明,采用基于风险的检验技术,既能节约大量的停车和检验维修费用,又能有效地提高重点设备管线的安全性和管理水平。     

塔里木盆地光温模式研究及其应用

建立了塔里木盆地光照、温度模式 ,该模式可以预测出塔里木盆地无资料地区各网格点的日照时数和冬季(1月)、夏季 (7月 )平均气温。在此基础上 ,应用统计学导出的极值分布和正态分布概率模式 ,预测了塔里木盆地各站上述要素不同概率的设计值。首次揭示了塔里木盆地无资料地区光照时间、温度分布规律。该模式为塔里木油田石油工业总体规划和大型工程设计及农业合理布局等提供了有效的科学依据     

矿物包裹体爆裂测温曲线上的“相变峰”及其意义

矿物的相转变曾被认为是矿物包裹体爆裂法测温的影响因素之一。本文从矿物在加热过程中发生相转变和内部气液包裹体爆裂二者不同的作用机理,以及在爆裂曲线上不同的反映出发,通过一些实验和实例对比,探讨了矿物相变对爆裂法测温实际效果的影响,和所谓石英“相变峰”在岩体对比等方面的实际意义,得出矿物相变对爆裂法测温不会产生有害影响的结论。     

冷轧带钢轧辊温度场及其控制

分析了冷轧过程中工作辊的温度变化及热凸度的形成 ,提出了控制热凸度的有效手段 ,对完善板型控制系统具有重要的意义     

一种预测左半部成形极限图的简单方法

板材成形性能的评价一般基于成形极限图(FLD)。然而，无论是经由理论计算还是实验方法来获得成形极限图依然很困难而且很耗时。提出了一种预测深拉延部分成形极限图的新方法。假设对所有钢板来说其成形极限图的形状几乎都是一样的，而深拉延变形区域内其失效厚度应变也几乎一样，据此可利用体积不变原理推导出主应变和次应变之间的关系。结果表明，根据此方法计算的左半侧(拉深应变区)成形极限图与实验获得的FLD基本一致。     

石墨炉原子吸收分光光度法测地面水中的铍

介绍了用石墨炉原子吸收分光光度计测定地面水中的铍的方法的建立     

循环流化床锅炉床温控制方法

就目前电厂循环流化床锅炉运行中存在的床温波动问题，讨论了导致床温波动的因素，并针对性地提出了控制床温的一些措施。