Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Abstract

Objective: With the overall goal to harmonize prospective effectiveness assessment of active safety systems, the specific objective of this study is to identify and evaluate sources of variation in virtual precrash simulations and to suggest topics for harmonization resulting in increased comparability and thus trustworthiness of virtual simulation-based prospective effectiveness assessment.

Methods: A round-robin assessment of the effectiveness of advanced driver assistance systems was performed using an array of state-of-the-art virtual simulation tools on a set of standard test cases. The results were analyzed to examine reasons for deviations in order to identify and assess aspects that need to be harmonized and standardized. Deviations between results calculated by independent engineering teams using their own tools should be minimized if the research question is precisely formulated regarding input data, models, and postprocessing steps.

Results: Two groups of sources of variations were identified; one group (mostly related to the implementation of the system under test) can be eliminated by using a more accurately formulated research question, whereas the other group highlights further harmonization needs because it addresses specific differences in simulation tool setups. Time-to-collision calculations, vehicle dynamics, especially braking behavior, and hit-point position specification were found to be the main sources of variation.

Conclusions: The study identified variations that can arise from the use of different simulation setups in assessment of the effectiveness of active safety systems. The research presented is a first of its kind and provides significant input to the overall goal of harmonization by identifying specific items for standardization. Future activities aim at further specification of methods for prospective assessments of the effectiveness of active safety, which will enhance comparability and trustworthiness in this kind of studies and thus contribute to increased traffic safety.     

跨行政区域水污染纠纷的对策探讨——剖析某水域水污染死鱼事故

针对某乡镇企业十分发达地区的跨行政(市县)区域水污染死鱼事故的剖析，本文提出了处理解决跨行政区域水污染纠纷事故的若干对策建议。     

南水北调的资源、环境和社会效应

建设南水北调工程，对中国的水资源在地区间进行合理调配，将带动其他资源的合理配置与利用，还可改善环境，是社会发展的需要，又受社会条件制约，一旦突破建成，将促使社会生产力发生新的飞跃并持续发展。     

Towards a smallholder hydrology for equitable and sustainable water management

Situations of water scarcity challenge sustainability and threaten small users' access to water. In response to this problem, there has been a search for a method of hydrological analysis that can better represent the needs of small water users. While this search is rooted in the debate favouring a more participatory and inclusive allocation of the resource, it also requires a new focus on smallholder hydrology that can confront the gaps and biases found in current hydrological practices in many countries. This article looks at past hydrological practices and also at results of recent studies, highlighting the perspective of smallholder irrigators in surface water planning in Zimbabwe, and groundwater planning in India. These case studies show that wider social forces, not always best science, drive hydrological practices. However, new frameworks focusing on the water user can emerge for more equitable and sustainable water management.     

节水灌溉措施下湘东北丘陵林-稻汇水区复合系统铅的迁移

铅通过食物链的迁移和积累对人类健康的毒害作用日益为社会所重视,而水稻是人类铅摄入的主要途径之一,因此,对稻田土壤铅的迁入途径及其过程特征的研究十分必要.为了探明湖南地区远离城镇、工矿区的丘陵稻区铅的输入、迁移、滞留机制,选择位于湘东北地域的汩罗市桃林林场的林地-山塘-稻田汇水区系统作为研究对象,在水稻大田生长期间,原位研究其大气沉降、岗地径流、山塘水、稻田水、水稻生长等过程的铅通量.结果表明：①输入系统的铅源是大气沉降,其中,在水稻生育前期通过东南季风输入的区域外源铅占90%;②山塘是大气沉降铅的主要集纳地貌单元,存留了大气沉降输入岗地和山塘总铅的66%;③林-稻汇水区系统岗地铅净留存28.8~57.7 g·hm^-2,山塘铅净留存604.3~961.9 g·hm^-2,稻田铅净留存89.6~90.9 g·hm^-2;而对照系统岗地铅净输出173.3 g·hm^-2,山塘净留存3427.6 g·hm^-2,稻田净留存87.1 g·hm^-2;④岗地和山塘对铅的截留量能够互补;⑤从岗地通过径流-山塘水过程迁移到稻田的大分子有机物能够增强稻田对铅的截留.综上所述,丘陵林-稻汇水区系统中铅的循环与大气沉降有关,系统内岗地森林类型、郁闭度、降水产流及泥沙、有机物的输出都会影响铅在系统中的迁移和分配.     

Bioassay: A useful tool for evaluating reclaimed water safety

Wastewater reclamation and reuse has been proved to be an effective way to relieve the fresh water crisis. However, toxic contaminants remaining in reclaimed water could lead to potential risk for reuse, and the conventional water quality standards have difficulty guaranteeing the safety of reclaimed water. Bioassays can vividly reflect the integrated biological effects of multiple toxic substances in water as a whole, and could be a powerful tool for evaluating the safety of reclaimed water. Therefore, in this study, the advantages and disadvantages of using bioassays for evaluating the safety of reclaimed water were compared with those of conventional water quality standards. Although bioassays have been widely used to describe the toxic effects of reclaimed water and treatment efficiency of reclamation techniques, a single bioassay cannot reflect the complex toxicity of reclaimed water, and a battery of bioassays involving multiple biological effects or in vitro tests with specific toxicity mechanisms would be recommended. Furthermore, in order to evaluate the safety of reclaimed water based on bioassay results, various methods including potential toxicology, the toxicity unit classification system, and a potential eco-toxic effects probe are summarized as well. Especially, some integrated ranking methods based on a bioassay battery involving multiple toxicity effects are recommended as useful tools for evaluating the safety of reclaimed water, which will benefit the promotion and guarantee the rapid development of the reclamation and reuse of wastewater.     

Revealing the changes of bacterial community from water source to consumers tap: A full-scale investigation in eastern city of China

This study profiled the bacterial community variations of water from four water treatment systems, including coagulation, sedimentation, sand filtration, ozonation-biological activated carbon filtration (O₃-BAC), disinfection, and the tap water after the distribution process in eastern China. The results showed that different water treatment processes affected the bacterial community structure in different ways. The traditional treatment processes, including coagulation, sedimentation and sand filtration, reduced the total bacterial count, while they had little effect on the bacterial community structure in the treated water (before disinfection). Compared to the traditional treatment process, O₃-BAC reduced the relative abundance of Sphingomonas in the finished water. In addition, ozonation may play a role in reducing the relative abundance of Mycobacterium. NaClO and ClO₂ had different effects on the bacterial community in the finished water. The relative abundance of some bacteria (e.g. Flavobacterium, Phreatobacter and Porphyrobacter) increased in the finished water after ClO₂ disinfection. The relative abundance of Mycobacterium and Legionella, which have been widely reported as waterborne opportunistic pathogens, increased after NaClO disinfection. In addition, some microorganisms proliferated and grew in the distribution system, which could lead to turbidity increases in the tap water. Compared to those in the finished water, the relative abundance of Sphingomonas, Hyphomicrobium, Phreatobacter, Rheinheimera, Pseudomonas and Acinetobacter increased in the tap water disinfected with NaClO, while the relative abundance of Mycobacterium increased in the tap water disinfected with ClO₂. Overall, this study provided the detailed variation in the bacterial community in the drinking water system.     

An investigation of changes in water quality throughout the drinking water production/distribution chain using toxicological and fluorescence analyses

Changes in water quality from source water to finished water and tap water at two conventional drinking water treatment plants(DWTPs) were monitored.Beside the routine water quality testing,Caenorhabditis elegans-based toxicity assays and the fluorescence excitation–emission matrices technique were also applied.Both DWTPs supplied drinking water that met government standards.Under current test conditions,both the investigated finished water and tap water samples exhibited stronger lethal,genotoxic and reprotoxic potential than the relative source water sample,and the tap water sample was more lethal but tended to be less genotoxic than the corresponding finished water sample.Meanwhile,the nearly complete removal of tryptophan-like substances and newly generated tyrosine-like substances were observed after the treatment of drinking water,and humic-like substances were identified in the tap water.Based on these findings,toxic pollutants,including genotoxic/reproductive toxicants,are produced in the drinking water treatment and/or distribution processes.Moreover,further studies are needed to clarify the potentially important roles of tyrosine-like and humic-like substances in mediating drinking water toxicity and to identify the potential sources of these contaminants.Additionally,tryptophan-like fluorescence may be adopted as a useful parameter to monitor the treatment performance of DWTPs.Our observations provided insights into the importance of utilizing biotoxicity assays and fluorescence spectroscopy as tools to complement the routine evaluation of drinking water.     

Role of the floodplain lakes in the methylmercury distribution and exchanges with the Amazon River, Brazil

Seasonal variability of dissolved and particulate methylmercury(F-MeHg, P-MeHg) concentrations was studied in the waters of the Amazon River and its associated Curuai floodplain during hydrological year 2005–2006, to understand the MeHg exchanges between these aquatic systems. In the oxic white water lakes, with neutral pH, high F-MeHg and P-MeHg concentrations were measured during the rising water stage(0.70 ± 0.37 pmol/L, n = 26) and flood peak(14.19 ± 9.32 pmol/g, n = 7) respectively, when the Amazon River water discharge into the lakes was at its maximum. The lowest mean values were reported during the dry season(0.18 ± 0.07 pmol/L F-MeHg, n = 10 and 1.35 ± 1.24 pmol/g P-MeHg, n = 8), when water and suspended sediments were outflowing from the lakes into the River. In these lakes,the MeHg concentrations were associated to the aluminium and organic carbon/nitrogen changes. In the black water lakes, with acidic pH and reducing conditions, elevated MeHg concentrations were recorded(0.58 ± 0.32 pmol/L F-MeHg, n = 16 and 19.82 ± 15.13 pmol/g PMeHg, n = 6), and correlated with the organic carbon and manganese concentrations. Elevated values of MeHg partition coefficient(4.87 Kd 5.08 log(L/kg) indicate that MeHg is mainly transported associated with the particulate phase. The P-MeHg enrichment detected in all lakes suggests autochthonous MeHg inputs from the sediments into the water column. The MeHg mass balance showed that the Curuai floodplain is not the source of P-MeHg for the Amazon River.