Modeling of a sequencing batch reactor treating municipal wastewater using multi-layer perceptron and radial basis function artificial neural networks

A sequencing batch reactor was modeled using multi-layer perceptron and radial basis function artificial neural networks (MLPANN and RBFANN). Then, the effects of influent concentration (IC), filling time (FT), reaction time (RT), aeration intensity (AI), SRT and MLVSS concentration were examined on the effluent concentrations of TSS, TP, COD and NH₄⁺-N. The results showed that the optimal removal efficiencies would be obtained at FT of 1 h, RT of 6 h, aeration intensity of 0.88 m³/min and SRT of 30 days. In addition, COD and TSS removal efficiencies decreased and TP and NH₄⁺-N removal efficiencies did not change significantly with increases of influent concentration. The TSS, TP, COD and NH₄⁺-N removal efficiencies were 86%, 79%, 94% and 93%, respectively. The training procedures of all contaminants were highly collaborated for both RBFANN and MLPANN models. The results of training and testing data sets showed an almost perfect match between the experimental and the simulated effluent of TSS, TP, COD and NH₄⁺-N. The results indicated that with low experimental values of input data to train ANNs the MLPANN models compared to RBFANN models are more precise due to their higher coefficient of determination (R²) and lower root mean squared errors (RMSE) values.     

The Impact of Agriculture On Dissolved Nitrogen and Phosphorus Cycling in Temperate Ecosystems

Although most research has focussed on inorganic nutrient forms of nitrate (NO^-₃) and phosphorus (PO³₄) in runoff and receiving waters, nitrogen loss from agricultural land can also occur in organic and ammonium-nitrogen form; phosphorus losses, although often dominated by particulate transport, may occur in soluble organic and inorganic form. Furthermore, fluxes between different species may take place during transport from the land to the stream and as a result of in-stream, in-river or in-lake transformations. Knowledge of the spatial and temporal variation in all nitrogen species and phosphorus fractions in a drainage basin is therefore essential if the wider environmental significance of elevated nutrient concentrations in natural waters are to be assessed. This paper reviews recent work on N and P losses from agricultural land and presents some results from two intensive agricultural catchments: Slapton, Devon and the river Windrush catchment in the Cotswolds.     

区域生态建设探索及实践

进行区域生态建设，必须以生态经济学原理为指导，以协调经济，社会，环境，建设为主要对象。我国生态示范区有生态农业，农工商一体化，生态旅游，生态破坏恢复和城市化等类型。通海县生态示范区通过优化产业结构，综合治理札麓湖，建设基础设施和重视科教等主要措施，取得了明显的经济，生态和社会效益。     

高级氧化技术机理及在水处理中的应用进展

综述了近年来发展迅速的高级氧化技术，主要包括Fenton法、臭氧氧化法、湿式氧化技术、超临界水氧化法、纳米光催化氧化法电化学催化降解法及超声降解法等。介绍了各种高级氧化技术的基本原理及在废水处理中的应用进展，并对其特点进行了评述。     

石灰石-石灰乳二段中和法处理矿山酸性废水

分析了处理含重金属离子矿山酸性废水的处理工艺。通过实例说明石灰石-石灰乳二段中和法与传统的石灰乳中和工艺相比，有较大的优越性，可以降低处理成本和减少沉渣的产生量。     

The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

制革废水治理方法的研究

对制革废水进行了实验研究，提出了制革废水的处理方法．即首先对铬鞣废水进行单独处理，回收鞣革液，再采用聚合硅酸系混凝剂和聚丙烯酰胺（ＰＡＭ）来处理混合废水的新方法．     

单级与两级序批式反应器用于牛场污水处理的比较研究

对序批式反应器 (SBR)的特点进行了简要的介绍。研究了水力停留时间和有机负荷率对单级和两级SBR用于牛场污水处理时污染物去除率和出水水质的影响 ,并对单级和两级SBR的污水处理性能进行了比较。研究结果表明 ,当用单级SBR处理 10 0 0 0mg LCODCr的污水时 ,1d水力停留时间即可获得较好的处理效果 ,但出水中仍含有一定量的氨。两级SBR可使用较短的水力停留时间而获得较高的污染物去除率和较好的出水水质 ,并可通过硝化过程实现氨的完全的去除     

可发性聚苯乙烯废水处理工程的设计与运行

介绍了采用中和混凝 水解酸化 生物接触氧化 化学除磷工艺对可发性聚苯乙烯 (EPS)废水的处理工艺。在废水中的CODCr、TP、SS、NH3 N分别为 194 0mg L、112mg L、5 92mg L、2 3 6mg L的条件下 ,废水经过处理后 ,出水CODCr、TP、SS、NH3 N分别为 70mg L、0 38mg L、2 6mg L、0 32mg L ,均可达到《污水综合排放标准》中的一级标准 ,废水中CODCr、TP、SS、NH3 N的平均去除率分别为 96 4 %、99 3%、95 6 %、98 6 %。     

爆炸法处理废旧轮胎制造橡胶粉末技术及关键机理研究

主要介绍了利用爆炸法处理废旧轮胎制造橡胶粉末的技术 ;探讨了橡胶在爆炸作用下破坏的机理 ,爆炸法中橡胶变形速率与它的剪切模量和断裂韧性的关系 ;分析了利用直接爆炸法处理废旧轮胎的 3种实验结果 ,验证了对轮胎进行预处理的必要性 ,探讨了炸药用量的选择原则