井下光谱多参数分析系统开发

本系统基于气体浓度光学分析方法理论朗伯-比尔(Lambert-Beer)定律、光谱气体检测技术开发,实现了对煤矿火灾与瓦斯灾害超前预警、灾害产生的有毒有害气体实时监测和煤矿环境气体爆炸危险性辨识,对于煤矿灾害防治、救灾过程中杜绝次生灾害,保障煤矿工人及救护队员的生命安全,促进煤矿安全生产具有重要意义。     

A hybrid model for human factor analysis in process accidents: FBN-HFACS

Human factors are the largest contributing factors to unsafe operation of the chemical process systems. Conventional methods of human factor assessment are often static, unable to deal with data and model uncertainty, and to consider independencies among failure modes. To overcome the above limitations, this paper presents a hybrid dynamic human factor model considering Human Factor Analysis and Classification System (HFACS), intuitionistic fuzzy set theory, and Bayesian network. The model is tested on accident scenarios which have occurred in a hot tapping operation of a natural gas pipeline. The results demonstrate that poor occupational safety training, failure to implement risk management principles, and ignoring reporting unsafe conditions were the factors that contributed most failures causing accident. The potential risk-based safety measures for preventing similar accidents are discussed. The application of the model confirms its robustness in estimating impact rate (degree) of human factor induced failures, consideration of the conditional dependency, and a dynamic and flexible modelling structure.     

Modeling of a sequencing batch reactor treating municipal wastewater using multi-layer perceptron and radial basis function artificial neural networks

A sequencing batch reactor was modeled using multi-layer perceptron and radial basis function artificial neural networks (MLPANN and RBFANN). Then, the effects of influent concentration (IC), filling time (FT), reaction time (RT), aeration intensity (AI), SRT and MLVSS concentration were examined on the effluent concentrations of TSS, TP, COD and NH₄⁺-N. The results showed that the optimal removal efficiencies would be obtained at FT of 1 h, RT of 6 h, aeration intensity of 0.88 m³/min and SRT of 30 days. In addition, COD and TSS removal efficiencies decreased and TP and NH₄⁺-N removal efficiencies did not change significantly with increases of influent concentration. The TSS, TP, COD and NH₄⁺-N removal efficiencies were 86%, 79%, 94% and 93%, respectively. The training procedures of all contaminants were highly collaborated for both RBFANN and MLPANN models. The results of training and testing data sets showed an almost perfect match between the experimental and the simulated effluent of TSS, TP, COD and NH₄⁺-N. The results indicated that with low experimental values of input data to train ANNs the MLPANN models compared to RBFANN models are more precise due to their higher coefficient of determination (R²) and lower root mean squared errors (RMSE) values.     

长江三峡区间数字流域水系的构建

基于全球陆地一公里基础高程GLOBE数据 ,采用Martz和Garbrecht研制的数字高程流域水系模型自动提取长江三峡万县～宜昌区间的河网水系、各子流域分水线、河网与子流域编码及河网结构拓扑关系 ,从而构成该区域的数字流域和数字水系。结果表明该模型生成的水系是可以接受的 ,与 1:10万地形图上长江三峡万县～宜昌区间的水系一致 ,这为空间分布式模型的建立提供了必备的空间信息数据。最后 ,探讨了数字流域水系在流域生态学中的应用前景 ,构建的数字水系可为中尺度以上流域水体和水生生物的资源保护与合理利用提供决策平台 ,服务于社会经济的可持续发展。     

Phosphate recovery with granular acid-activated neutralized red mud: Fixed-bed column performance and breakthrough curve modelling

Granular acid-activated neutralized red mud (AaN-RM) has been successfully prepared with good chemical stability and physical strength. However, its potential for industrial application remains unknown. Therefore, the performance of granular AaN-RM for phosphate recovery in a fixed-bed column was investigated. The results demonstrated that the phosphate adsorption performance of granular AaN-RM in a fixed-bed column was affected by various operational parameters, such as the bed depth, flow rate, initial solution pH and initial phosphate concentration. With the optimal empty-bed contact time (EBCT) of 24.27 min, the number of processed bed volumes and the phosphate adsorption capacity reached 496.95 and 84.80 mg/g, respectively. Then, the saturated fixed-bed column could be effectively regenerated with a 0.5 mol/L HCl solution. The desorption efficiency remained as high as 83.45% with a low weight loss of 3.57% in the fifth regeneration cycle. In addition, breakthrough curve modelling showed that a 5-9-1 feed-forward artificial neural network (ANN) could be effectively applied for the optimization of the fixed-bed adsorption system; the coefficient of determination (R²) and the root mean square error (RMSE) evaluated on the validation-testing data were 0.9987 and 0.0183, respectively. Therefore, granular AaN-RM fixed-bed adsorption exhibits promising potential for phosphate removal and recovery from polluted water.     

不同居民燃煤炉具大气污染物排放差异性及减排分析

为探究不同类型炉具的大气污染物排放差异,本研究选择5种常见的新式居民燃煤炉具（方型煤炉具、折流换热炉具、炕暖炊一体化炉具、气化正烧及气化反烧炉具）在实验室内进行模拟燃烧和大气污染物排放水平监测,定量评估不同炉具的环境效果,识别污染排放水平差异的影响因素及原因,从而提出炉具研发设计等污染减排的改进建议.结果表明：①不同炉具大气污染物排放差异较大,炕暖炊一体的炉具污染排放强度最大,3种大气污染物（SO₂、NO_x和颗粒物）的排放强度为2.9 kg ·t^-1,是平均值的1.6倍;应用方型煤技术的炉具大气污染物排放强度最低,是平均值的65%.②不同炉具在不同燃烧阶段其气态污染物排放也呈现出明显的差异和特征.旺火阶段方型煤炉具NO_x排放浓度为0.49mg ·m^-3,相较于其他类型炉具降低了45%~72%;气化反烧炉具的SO₂排放浓度为1.38mg ·m^-3,相较于其他类型炉具最高降低了28%.③影响炉具大气污染物排放因素包括应用技术及燃烧类型,采用方型煤及气化反烧技术的炉具环境效益较好,但两类炉具的经济成本分别达到2.0万元和1.8万元,明显高于其他类型炉具.④考虑不同炉具污染排放差异,建议采取差异化的经济政策和严格的排放和产品标准,推广使用节能环保型炉具,降低燃煤炉具大气污染物排放.     

旅游目的地网络空间结构及其复杂性研究——野三坡旅游地案例实证

复杂性是旅游目的地网络化发展的必然趋势,是认识旅游地网络空间结构与组织特征的重要研究手段。论文以河北省野三坡旅游地为例,通过构建旅游联系强度模型,建立旅游地空间网络,并运用TOP网络空间分析以及复杂网络理论,揭示旅游地网络空间结构与组织的复杂性特征。研究发现：1）旅游地网络具有空间集聚性,形成了以核心景区为中心,由中心城镇、乡村社区和特色园区共同构成的空间集聚单元,并体现出“邻近连接”与“择优连接”的双重特性;2）旅游地网络服从幂律分布,具有无标度网络特性;3）每个节点的前三名和前五名旅游联系强度网络（Top3和Top5网络）具有较小的平均路径长度、较大的集聚系数,呈现出典型的“小世界网络”特征;4）旅游地网络是典型的异配型网络,度-度呈负相关,而网络节点的集聚系数与其度值之间存在近似的倒数关系,因此具有层次性。     

基于SOM-SVM组合分类器的涂层防护性能研究

目的为避免EIS,EN技术可能出现的问题,建立一个准确、高效的评价模型,以探究现役军用有机涂层防护性能。方法利用电化学阻抗谱(EIS)、电化学噪声(EN)技术分析了两种军车有机涂层在循环暴露试验中的腐蚀行为,提取低频阻抗模值|Z|_(0.1 Hz)与涂层噪声电阻R_n两种电化学评价参数作为自组织神经网络(SOM)的输入训练样本,同时结合支持向量机(SVM)方法建立涂层防护性能组合分类器。结果将涂层失效过程自适应地分为涂层防护性能良好、防护性能下降、基本失效三个阶段。结论所建立的SOM-SVM组合分类器对于辅助分析涂层防护性能具有可行性。     

油气集输管道内防腐技术应用进展

针对油气田集输管道的内腐蚀问题,分别介绍了耐蚀材料、衬里技术、涂镀层技术与药剂防腐技术等管道内防腐技术及其现场应用效果,指出了耐蚀金属材料防腐效果显著,但存在经济效益差的缺点。为降低成本,选用双金属复合管替代耐蚀金属材料,但其焊缝位置腐蚀失效频发,成为制约其应用的薄弱环节。耐蚀非金属材料防腐效果显著,但耐高温性能与力学性能较差,受温度、压力与CO_2、H_2S、固体颗粒等介质成分的影响,衬里技术与涂镀层技术的应用范围受到限制。药剂防腐技术的防护效果与药剂类型、加药工艺密切相关,需要根据腐蚀工况监测结果进行实时调整。针对上述内防腐技术存在的问题,提出了未来内防腐技术的发展方向为改进现有内防腐技术存在的不足,提升其防护效果。同时,应开发防腐效果显著、经济成本低、施工简便、易于推广应用的防腐材料与防腐工艺技术。     

Monitoring Air Quality in Mountains: Designing an Effective Network

A quantitatively robust yet parsimonious air-quality monitoring network in mountainous regions requires special attention to relevant spatial and temporal scales of measurement and inference. The design of monitoring networks should focus on the objectives required by public agencies, namely: 1) determine if some threshold has been exceeded (e.g., for regulatory purposes), and 2) identify spatial patterns and temporal trends (e.g., to protect natural resources). A short-term, multi-scale assessment to quantify spatial variability in air quality is a valuable asset in designing a network, in conjunction with an evaluation of existing data and simulation-model output. A recent assessment in Washington state (USA) quantified spatial variability in tropospheric ozone distribution ranging from a single watershed to the western third of the state. Spatial and temporal coherence in ozone exposure modified by predictable elevational relationships ( 1.3 ppbv ozone per 100 m elevation gain) extends from urban areas to the crest of the Cascade Range. This suggests that a sparse network of permanent analyzers is sufficient at all spatial scales, with the option of periodic intensive measurements to validate network design. It is imperative that agencies cooperate in the design of monitoring networks in mountainous regions to optimize data collection and financial efficiencies.