Pearce型构造岩浆地球化学判别图评述——以玄武岩为例

自从六十年代板块构造的概念诞生以来,人们认识到有必要探讨古地理和古构造重建的方法.一段时期以来,很多学者(如Gilluly,1971)认为,岩浆作用与特定的大地构造环境紧密相关,不同的岩浆类型或火山岩系列产在一定的地壳环境,因而出现了许多运用主要或微量元素资料的分类体系或判别图.基于Irvine和Barager(1971)以及Miyashiro(1973)发表的主要元素图解能用来判别岩浆类型,而Pearce(1976)则介绍     

螯合纤维的合成及其吸附重金属离子的研究

研究了含有胺肟基和胺腙基功能纤维的合成、结构表征和螯合性能。新型合纤维对多种重金属离子具有良好的吸附性能，能从被污染的水体和土壤中去除重金属离子，经洗脱后可回收金属，螯合纤维能反复使用。     

华南玄武岩红土化过程中微量元素地球化学

广东、海南的玄武岩．在强烈的红土化过程中．元素在红土剖面中发生迁移和残留、贫化和富集。根据红土化过程中元素的地球化学性状，将元素划分为活泼元素和不活泼元素两大类。并首次采用了元素它集因子这个概念来探讨红土化过程中微量元素的地球化学行为。最后讨论了红土化过程小金的表生富集作用。     

袋式除尘器在立窑烟气除尘中的应用

对立窑烟尘排放特点与立窑除尘工艺中的问题及对策进行了讨论。分析了立窑烟尘排放特征,对几种常见的立窑除尘的设备和工艺进行了比较,指出袋式除尘器可成功地用于立窑烟气除尘。并且从滤料选择、清灰方式、烟温控制、灰斗的气密性等方面详细地完善了袋式除尘器在立窑烟气除尘中的应用。     

A2/O工艺处理氨纶废水的应用研究

介绍了采用厌氧-缺氧-接触氧化(即A2/O)组合工艺处理氨纶生产废水的流程和设计参数,通过近半年的调试数据,反应季节对A2/O组合工艺处理氨纶生产废水的影响和可行性。提出运行过程中需要控制的参数,提供设计和运行参考。     

改良型固定化Pseudomonas oleovorans DT4降解四氢呋喃的研究

成功构建出了新型的海藻酸钠-活性炭纤维复合固定化Pseudomonas oleovorans DT4来去除四氢呋喃,并优化了该复合固定化载体组分的含量,发现在海藻酸钠含量为3%,活性炭纤维含量为1.5%条件下,制备成细胞浓度为6×109g-1的协同固定化细胞在初始THF浓度为360 mg·L-1时的降解速率达到最大为24.0 mg·(L.h)-1,同时其机械强度也得到了显著的提升.此外与游离菌体相比,该固定化细胞在不同温度和pH条件下的降解速率表现得更加稳定,且去除效果均能稳定在80%以上.在改进的反应体系中,协同固定化小球高效降解THF的重复利用次数达到80批以上,显示出该载体良好的可行性.     

中义隧道片理化玄武岩段大变形控制技术研究*

为进一步探究高地应力隧道软岩大变形控制技术,以中义隧道主洞片理化玄武岩段为工程背景,提出大变形Ⅰ型支护、大变形Ⅱ型支护、大变形Ⅱ型支护（围岩加固）3种大变形控制方案,以现场试验段监测为辅助验证,采用数值仿真对3种控制方案的控制效果进行对比分析。结果表明:适宜的支护成环时间具有减缓大变形的作用;在衬砌各部位累计最大变形控制方面,控制方案3较其他方案衬砌最大变形最少减小20.8%,且变形时程曲线最终收敛;围岩最大日变形量控制方面,经过开挖断面的进一步优化以及边墙部位塑性区围岩自承能力的提高,控制方案3最大日变形量较其他支护方案至少减小20.8%。结果显示控制方案3能够稳定控制片理化玄武岩大变形,且效果最好,研究结果可为类似工程提供设计依据。     

Solvent design and inherent safety assessment of solvent alternatives for palm oil recovery

The concept of inherent safety is important in developing an inherently safer and user-friendly process. This paper discusses a new integrated approach of computer-aided product design and inherent safety assessment. Computer-aided Molecular Design (CAMD) approach was utilized in this work to identify potential alternative to n-hexane, the widely used industrial solvent in extracting residual palm oil from pressed palm fibre. The formulation of solvent mixtures was optimized to meet the targeted physical properties before being tested using the Soxhlet Extraction method. Inherent safety assessment to assess the solvent's flammability, toxicity, reactivity, and explosiveness was conducted on the new solvent mix, Mixture 1 (n-hexane + ethanol), Mixture 2 (n-hexane + acetone) and Mixture 3 (n-hexane + n-butanol). It was found that Mixture 1 and 3 are safer than n-hexane and able to extract more oil than n-hexane and Mixture 2. However, the utilization of the solvent is dependent on the end product from the residual palm oil.     

静电布袋复合式除尘器及其应用

介绍了静电布袋复合式除尘器的结构、材料及除尘原理;布袋除尘器在不同工况下的除尘效率、附加脱硫率、阻力和排放浓度等参数的测试结果;利用布袋除尘器改造静电除尘器时的改造方案、运行中应注意的问题.     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.