警用头盔的人机工程学分析

警用头盔是武警部队使用最为频繁的单兵防护用具,本文基于人机工程学的理论,用人机工程学的观点对武警部队现装备的警用头盔进行分析和探讨,提出解决途径的设想,展望警用头盔的发展前景。     

秸秆腐解剂在秸秆还田中的效果研究初报

在大田、微区和盆栽条件下,研究了秸秆腐解剂对小麦、水稻生长及产量的影响,同时研究了秸秆腐解剂对小麦、水稻秸秆腐解速率及对土壤肥力的影响。结果表明,稻、麦秸秆还田时施用秸秆腐解剂对提高稻、麦产量具有明显的增产效果,增产的原因是穗数和粒数增加;稻、麦秸秆还田量不同时,还田量大且配施秸秆腐解剂的效果较还田量小好;麦秸秆还田方式不同时,麦秸以栽稻前耕翻还田且配施秸秆腐解剂的效果较好,上水沤制的效果较差;秸秆腐解剂能促进稻、麦秸秆较快腐解,减轻和防止多量秸秆还田给作物生长带来不利影响,并可稳定和提高土壤养分含量。     

流域水资源可持续开发利用中激励机制的应用

本文分析了流域水资源开发利用中存在的问题及原因，并根据可持续发展的理论，提出了流域水资源可持续开发利用的原则及相应的激励机制：①水价机制；②宏观调控机制；③水权机制；④相应的流域管理机制。     

长江三角洲地区基于喷涂工艺的溶剂源VOCs排放特征

了解挥发性有机物(volatile organic compounds,VOCs)的溶剂源排放特征是制定长江三角洲地区PM2.5和臭氧防控策略的关键.本研究通过罐采样-GC-MS/FID测定了长江三角洲地区重点喷涂行业(集装箱喷涂、造船喷涂、木器喷涂和汽车喷涂业)的VOCs排放特征.结果表明,长江三角洲地区喷涂行业排放的主要VOCs组分为甲苯、二甲苯、乙苯等芳香烃类物质,三者之和占总VOCs的质量分数为79%~99%.生产工艺的不同对VOCs的排放组成影响并不大,废气处理装置中活性炭吸附对VOCs的组成并无明显影响,而催化燃烧的处理过程会使VOCs的排放组成产生显著变化,乙烯排放明显增大,同时也使得催化燃烧处理最大增量反应活性(maximum increment reactivity,MIR)值高于活性炭吸附处理后的MIR值,说明不同的处理措施的使用将影响VOCs对臭氧的生成作用.     

浅谈磷石膏的综合利用

根据磷石膏作为湿法生产磷酸过程中的副产品,且含有少量的P2O5和氟等有害成分,是生产厂家面临的磷石膏的处理和再利用这一实际问题,论述了磷石膏的综合利用情况,为磷石膏的利用和开发提供了研究和参考的方向。     

Examination of factors associated with use rates after transition from a universal to partial motorcycle helmet use law

Objectives: Motorcycle riders account for a disproportionately high number of traffic injuries and fatalities compared to occupants of other vehicle types. Though research has demonstrated the benefits of helmet use in preventing serious and fatal injuries in the event of a crash, helmet use has remained relatively stable in the United States, where the most recent national estimates show a 64% use rate. Use rates have been markedly lower among those states that do not have a universal helmet law for all riders. In 2012, the state of Michigan repealed its longstanding mandatory helmet use law. In order to gain insights as to the effects of this legislative change, a study was conducted to examine short-term changes in helmet use and identify factors associated with use rates.

Methods: A statewide direct observation survey was conducted 1 year after the transition from a universal helmet law to a partial helmet law. A random parameters logistic regression model was estimated to identify motorcyclist, roadway, and environmental characteristics associated with helmet use. This modeling framework accounts for both intravehicle correlation (between riders and passengers on the same motorcycle) as well as unobserved heterogeneity across riders due to important unobserved factors.

Results: Helmet use was shown to vary across demographic segments of the motorcyclist population. Use rates were higher among Caucasian riders, as well as among those age 60 and above. No significant difference was observed between male and female riders. Use was also found to vary geographically, temporally, and with respect to various environmental characteristics. Geographically, helmet use rates tended to be correlated with historical restraint use trends, which may be reflective of riding environment and general differences in the riding population. To this end, rates were also highly variable based upon the type of motorcycle and whether the motorcyclist was wearing high-visibility gear.

Conclusions: The study results demonstrate the short-term reduction in helmet use following transition from a universal to partial motorcycle helmet law. The reduction in use is somewhat less pronounced than has been experienced in other states, which may be reflective of general differences among Michigan motorcyclists because the state has also generally exhibited higher use rates of seat belts and other forms of occupant protection. The study results also highlight potential target areas for subsequent education and public awareness initiatives aimed at increasing helmet use.     

Evaluation of recycling efforts of aircraft companies in Wichita

The number of manufactured aircraft has been continuously increasing worldwide because of the high demand for airline transportation. During manufacturing, many advanced materials and devices are used to build various sizes and shapes of aircraft. However, most of these materials and devices require considerable energy and labor to produce, so reusing these at any life stage of the aircraft offers many economic and environmental benefits, and is considered lucrative and environmentally responsible. Several recyclable materials—composites, metals and alloys, wires, wood, paper, plastics, electronics, and avionics—emerge as waste streams during the manufacturing of aircraft. Many aircraft companies have been recycling these materials to remanufacture aircraft parts or other products for more sustainable production. In the present study, we evaluated the recycling efforts of local aircraft companies in Wichita, KS. These efforts were considered in terms of recycling efficiency/rate and environmental benefits. These included cradle-to-gate (CTG) life-cycle inventory analysis of the materials, carbon dioxide emissions, virgin material replacement with recycled materials, and natural resources usage. Our findings show that there exists a significant potential for contributions to sustainability as well as environmental and health benefits in the region from recycling by aircraft manufacturing plants.     

基于改进的YOLOv4安全帽佩戴检测研究

为了加强建筑工人佩戴安全帽情况的检测,防止安全事故的发生,提出1种改进的轻量级YOLOv4安全帽佩戴检测算法,用于运行在移动设备端,降低现场部署的条件;制作1个8 000幅图像的数据集,用于训练和评估安全帽检测算法;为了评估改进的YOLOv4的性能,从5个不同建筑工地采集到600张施工人员图像和60条施工视频作为验证集;根据建筑工地不同的视觉条件对图像进行分类,用于验证本文算法在不同外界环境下的性能。结果表明:改进后的模型检测速度是YOLOv4的3.4倍,可用于实时检测施工人员在不同施工现场条件下是否佩戴安全帽的情况,有利于提高安全检查和监督水平。     

喀斯特坡地地表径流系数监测初报

通过对喀斯特坡地6种不同土地利用条件下径流小区的地表径流和植被穿透雨量以及地下水出口水位变化进行野外定点连续观测研究,结果表明,6个径流小区地表径流系数均非常小,介于0.01%~12.81%。显然,喀斯特坡地的地表径流易于入渗转化为地下径流。受人为活动影响较大的径流小区,地表径流系数随降雨量的变化呈指数函数型变化特征,容易产生地表径流系数的突变式增长。     

填海造地生态损害评估:理论、方法及应用研究

论文建立了一系列生态-经济模型,用于评估填海造地生态损害的价值以及被填海域作为生产要素的价值。用所建立的模型对厦门填海造地进行经验估算,得出在厦门每m²填海造地生态损害的价值为279元,远远高于现行的填海造地海域使用金征收标准。加上海域作为生产要素的价值,厦门工业用填海造地海域使用金征收标准应该为327.82元/m²,商业用填海造地的海域使用金征收标准应该为相邻土地价格的50%～55%。研究结果可以为制定填海造地规划和控制填海造地的经济手段提供强有力的科技支撑。