Ca(OH)2解吸并固定混合吸收液中CO2的实验研究

CO₂化学吸收法分离纯度高,技术成熟,但能耗过高及成本是困扰该技术发展的瓶颈.在常压条件下对利用Ca（OH）₂直接矿物碳酸化固定MDEA/PZ混合吸收富液中CO₂进行了一系列实验研究,考察了吸收液负荷、Ca（OH）₂投加量、pH、温度及搅拌速率等因素对解吸率的影响,并利用动态吸收-解吸循环实验研究了其CO₂吸收性能和循环使用稳定性,最后对碳酸化反应产物进行了XRD、TEM分析.结果表明,在常压条件下,Ca（OH）₂可以通过液相直接矿物碳酸化对CO₂进行直接固定,并实现吸收富液的再生;随着负荷的升高及Ca（OH）₂投加量、pH、搅拌速率的增大,解吸率随之增加;随着溶液温度升高,解吸率下降;经过5次动态吸收-解吸循环实验后CO₂吸收量可以达到并保持在0.57 mol·L^-1,显示出了良好的循环稳定性.     

稀土元素镧对金鱼藻生长生理及细胞叶绿体结构的影响

研究了稀土元素镧对金鱼藻叶绿素总量、抗坏血酸氧化酶、过氧化氢酶、过氧化物酶等代谢指标和细胞叶绿体亚显微结构的影响，以及金鱼藻对镧的吸收积累作用，结果表明，短期内低浓度（２－１１０ｍｇ／Ｌ）的镧对金鱼藻生长有一定刺激促进作用，但随处理时间的延长及处理浓度的提高，抑制作用明显增强，并破坏细胞叶绿体结构；金鱼藻对镧有较强的吸收积累能力。     

Production of hydrogen by steam gasification of dehydrochlorinated poly(vinyl chloride) or activated carbon in the presence of various alkali compounds

Steam gasification of dehydrochlorinated poly(vinyl chloride) (PVC) or activated carbon was carried out in the presence of various alkali compounds at 3.0 MPa and 560°C–660°C in a batch reactor or in a semi-batch reactor with a flow of nitrogen and steam. Hydrogen and sodium carbonate were the main products, and methane and carbon dioxide were the minor products. Yields of hydrogen were high in the presence of sodium hydroxide and potassium hydroxide. The acceleration effect of the alkali compounds on the gasification reaction was as follows: KOH > NaOH > Ca(OH)₂ > Na₂CO₃. The rate of gasification increased with increasing partial steam pressure and NaOH/C molar ratio. However, the rate became saturated at a molar ratio of NaOH/C greater than 2.0.     

Simultaneous removal of Cu(II) and Cr(VI) by Mg–Al–Cl layered double hydroxide and mechanism insight

Mg–Al–Cl layered double hydroxide (Cl-LDH) was prepared to simultaneously remove Cu(II) and Cr(VI) from aqueous solution. The coexisting Cu(II) (20 mg/L) and Cr(VI) (40 mg/L) were completely removed within 30 min by Cl-LDH in a dosage of 2.0 g/L; the removal rate of Cu(II) was accelerated in the presence of Cr(VI). Moreover, compared with the adsorption of single Cu(II) or Cr(VI), the adsorption capacities of Cl-LDH for Cu(II) and Cr(VI) can be improved by 81.05% and 49.56%, respectively, in the case of coexisting Cu(II) (200 mg/L) and Cr(VI) (400 mg/L). The affecting factors (such as solution initial pH, adsorbent dosage, and contact time) have been systematically investigated. Besides, the changes of pH values and the concentrations of Mg²⁺ and Al³⁺ in relevant solutions were monitored. To get the underlying mechanism, the Cl-LDH samples before and after adsorption were thoroughly characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. On the basis of these analyses, a possible mechanism was proposed. The coadsorption process involves anion exchange of Cr(VI) with Cl⁻ in Cl-LDH interlayer, isomorphic substitution of Mg²⁺ with Cu²⁺, formation of Cu₂Cl(OH)₃ precipitation, and the adsorption of Cr(VI) by Cu₂Cl(OH)₃. This work provides a new insight into simultaneous removal of heavy metal cations and anions from wastewater by Cl-LDH.     

Supercritical water oxidation of polyvinyl alcohol and desizing wastewater：Influence of NaOH on the organic decomposition

Polyvinyl alcohol is a refractory compound widely used in industry. Here we report supercritical water oxidation of polyvinyl alcohol solution and desizing wastewater with and without sodium hydroxide addition. However, it is difficult to implement complete degradation of organics even though polyvinyl alcohol can readily crack under supercritical water treatment. Sodium hydroxide had a significant catalytic effect during the supercritical water oxidation of polyvinyl alcohol. It appears that the OH ion participated in the C-C bond cleavage of polyvinyl alcohol molecules, the CO2-capture reaction and the neutralization of intermediate organic acids, promoting the overall reactions moving in the forward direction. Acetaldehyde was a typical intermediate product during reaction. For supercritical water oxidation of desizing wastewater, a high destruction rate (98.25%) based on total organic carbon was achieved. In addition, cases where initial wastewater was alkaline were favorable for supercritical water oxidation treatment, but salt precipitation and blockage issues arising during the process need to be taken into account seriously.     

ZnOOH/O3催化臭氧化体系去除水中痕量对氯硝基苯

以实验室制备的羟基化锌（ZnOOH）为催化剂,考察了其催化臭氧化去除水中痕量对氯硝基苯（ppCNB能力.本实验条件下,蒸馏水中反应20　min时,催化臭氧化比单独臭氧化对pCNB的去除率提高了51 .3个百分点;催化过程遵循自由基反应机理,催化剂表面结合的羟基基团有利于催化反应;pCNB的去除效果随催化剂投量的增加而更佳,催化剂重复使用3次后,催化效果基本没有变化,水中的重碳酸盐以及缓冲溶液中的磷酸盐可以明显降低催化活性,中性条件下,催化作用最佳.     

酸雨与镧对大豆幼苗生长的复合伤害效应研究

为探索酸雨与稀土镧对大豆幼苗生长的复合影响及其内在机制,以重要油粮作物大豆(Glycine max)为材料,研究在模拟酸雨pH分别为3.0、3.5、4.5与稀土镧La(Ⅲ)浓度分别为60、100和300mg·L-1处理下大豆幼苗生长及光合作用的变化.结果表明,相对单一酸雨与镧处理,酸雨与La(Ⅲ)复合处理组中大豆幼苗的生长受抑制程度增大,两者呈协同效应,且pH越低,La(Ⅲ)浓度越高,抑制效应越明显.光合参数的变化规律与生长指标近同,相同处理组各光合参数的降幅不一致,其中最大荧光(Fv/Fm)和叶绿素含量(Chl)的降幅范围分别为9.53%～22.75%和9.14%～24.53%,较净光合速率Pn(22.78%～84.7%)、希尔(Hill)反应速率(15.52%～73.38%)和Mg2+-ATPase活性(14.51%～71.54%)小,表明各光合参数对2个胁迫因子的敏感程度存在差异.进一步相关性分析发现,Pn变化主要受Hill反应速率与Mg2+-ATPase活性的影响,而Chl、Fv/Fm次之.表明酸雨与La(Ⅲ)对植物光合过程各环节的作用机制不同,光合作用受阻是影响植物生长的重要因素之一.     

改性氢氧化镁制备及其去除地下水中Cr3+性能研究

氢氧化镁作为一种可缓慢释放OH-的碱,能使多数重金属离子转换为沉淀,而且不会引起太大的pH变化.但氢氧化镁难溶于水,在含水层中的迁移能力很差.若要用于地下水重金属污染修复,需要对氢氧化镁进行改性.因此,本文利用表面活性剂对氢氧化镁粉末进行改性,合成了氢氧化镁胶体,并对改性氢氧化镁的稳定性、粒度及其对Cr3+的稳定化效果进行了分析.结果表明,复配表面活性剂改性的氢氧化镁悬浮液稳定性好,粒径小,0.6~8.4μm的颗粒占82.41%.利用改性氢氧化镁对Cr3+污染地下水进行处理,其对Cr3+的去除机理主要为沉淀反应,氢氧化镁和Cr3+反应的质量比约为1.333∶1,氢氧化镁和初始Cr3+浓度对Cr3+的去除效果都有较大的影响.     

镧及其配合物对鱼体肝脏中酶活性的影响

以鲫鱼（Ｃａｒａｓｓｉｕｓ ａｕｒａｔｕｓ）为实验对象,研究了镧（Ｌａ）及其配合物（Ｌａ－ＥＤＴＡ）对鱼体肝脏中过氧化氢酶和超氧歧化酶的早期作用过程。结果表明：在实验浓度下Ｌａ＾３＋与Ｌａ－ＥＤＴＡ对鱼肝中过氧化氢酶有激活作用,但最终表现为强烈抑制：而对超氧歧化酶最初显著抑制,最后表现为激活作用。     

钙钛矿型La_(0.8)Ce_(0.2)Fe_(1-x)Co_xO_3催化剂的制备及其三效催化活性

采用自燃烧法制备了一组钙钛矿型复合氧化物La_(0.8)Ce_(0.2)Fe_(1-x)Co_xO_3(x=0.9,0.7,0.5,0.3,0.1),并考察了其对CO、C_3H_6和NO的三效催化活性。XRD和SEM表征结果显示,La_(0.8)Ce_(0.2)Fe_(1-x)Co_xO_3具有良好的钙钛矿型晶体结构,晶粒大小为纳米级并自组装成片状结构。催化剂的比表面积为14.73~22.43 m~2/g,含有微孔和介孔结构。催化活性评价结果表明:La_(0.8)Ce_(0.2)Fe_(0.1)Co_(0.9)O_3具有很好的三效催化活性,在理论空燃比的条件下,CO、C_3H_6和NO的起燃温度分别为195℃、264℃和290℃,完全转化温度分别为239℃、418℃和415℃,低温三效催化活性良好;Fe和Co的掺杂量同时影响着La_(0.8)Ce_(0.2)Fe_(1-x)Co_xO_3的催化效果。