Fluoride removal and its impact on oral health in Sri Lanka's dry zone: Discussion and recommendation

Fifty percent of the dry zone areas in Sri Lanka have fluoride levels above 1 ppm. This paper discusses the ground conditions and recommends an appropriate range of fluoride in drinking water which can support preventive practices for improving the oral health of children 8-years old and younger. In efforts to address the Chronic Kidney Disease of Unknown etiology (CKDU), water treatment to reduce contaminant level in potable water has been implemented. Such treatment would also remove fluoride and has resulted in potable water with various fluoride levels, depending on concentrations in the raw water. While it is important to reduce fluoride levels, it is important to have appropriate residual levels for prevention of dental caries. It needs, however, to be noted fluoride in excess can cause dental fluorosis. In Sri Lanka's dry zone areas increasing prevalence of dental fluorosis with decreasing prevalence of dental caries has been noted. Consumption of tea and powdered milk could increase total intake of fluoride. Fluoridated toothpaste, when used properly, may, however, result in negligible intake of fluoride. Sri Lanka's hot tropical climate which results in substantial intake of fluids reinforces the need to consider reduction in water fluoride. Consideration of local studies and international standards indicate fluoride levels should be in the range of 0.225–0.500 ppm. In the range of 0.225–0.500 ppm, the prevalence of dental fluorosis and caries was only 14% and 8%, respectively, in an endemic district. When fluoride levels are above 0.500 ppm, the issue of dental fluorosis shall need to be addressed. When levels are below 0.225 ppm, oral health care services shall need to be directed at preventing dental caries.     

Emerging applications of green coconut: A promising lignocellulosic biomass

Waste accumulation is a grave concern and becoming a transboundary challenge for environment. During Covid-19 pandemic, diverse type of waste were collected due to different practices employed in order to fight back the transmission rate of the virus. Covid-19 was proved to be capricious catastrophe of this 20th century and even not completely eradicated from the world. The havoc created by this imperceptible quick witted, pleomorphic deadly virus can't be ignored. Though a number of vaccines have been developed by the scientists but there is a fear of getting this virus again in our life. Medical studies prove that immunity drinks will help to reduce its reoccurrences. Coconut water is widely used among all drinks available globally. Its massive consumption created an incalculable pile of green coconut shells around the different corners of the world. This practice generating enormous problem of space acquisition for the environment. Both the environment and public health will benefit from an evaluation of quantity of coconut waste that is being thrown and its potential to generate value added products. With this context, present article has been planned to study different aspects like, coconut waste generation, its biological properties and environmental hazards associated with its accumulation. Additionally, this review illustrates, green technologies for production of different value added products from coconut waste.     

Modeling of a sequencing batch reactor treating municipal wastewater using multi-layer perceptron and radial basis function artificial neural networks

A sequencing batch reactor was modeled using multi-layer perceptron and radial basis function artificial neural networks (MLPANN and RBFANN). Then, the effects of influent concentration (IC), filling time (FT), reaction time (RT), aeration intensity (AI), SRT and MLVSS concentration were examined on the effluent concentrations of TSS, TP, COD and NH₄⁺-N. The results showed that the optimal removal efficiencies would be obtained at FT of 1 h, RT of 6 h, aeration intensity of 0.88 m³/min and SRT of 30 days. In addition, COD and TSS removal efficiencies decreased and TP and NH₄⁺-N removal efficiencies did not change significantly with increases of influent concentration. The TSS, TP, COD and NH₄⁺-N removal efficiencies were 86%, 79%, 94% and 93%, respectively. The training procedures of all contaminants were highly collaborated for both RBFANN and MLPANN models. The results of training and testing data sets showed an almost perfect match between the experimental and the simulated effluent of TSS, TP, COD and NH₄⁺-N. The results indicated that with low experimental values of input data to train ANNs the MLPANN models compared to RBFANN models are more precise due to their higher coefficient of determination (R²) and lower root mean squared errors (RMSE) values.     

A multi-path routing-inventory problem for a closed-loop supply chain considering the heterogeneous fleet of vehicles

In this paper, the inventory-routing problem is studied for a closed-loop supply chain. This closed-loop supply chain considers suppliers, manufacturers, whole-sellers, and disposal centers. To formulate this problem, a mixed integer linear programming model is proposed. This mathematical model minimizes the total costs of the supply chain, including the fixed and variable costs of vehicles, and holding inventory costs of final products and scraps. The proposed model considers the road roughness degree, multi-path setting and the heterogeneous fleet of vehicles, which increases its flexibility and the quality of solutions. Then, two symmetry-breaking constraints are proposed to reduce the complexity of the mathematical model. In order to evaluate the integrity of the proposed model, 20 instances of different sizes are randomly generated and solved. Finally, a comprehensive sensitivity analysis is conducted with respect to five key features of the problem, such as the impact of the symmetry-breaking constraints on the CPU time, multi-path setting, fixed cost of vehicles, heterogeneous fleet of vehicles, and lost sales. The results indicate that the consideration of multi-path setting and the heterogeneous fleet of vehicles improves the quality of solutions significantly.     

Experience in quantitative analysis of floristic structure and diversity in Samarskaya Luka

Quantitative methods have been applied to the study of floristic structure and diversity in Samarskaya Luka. The results show that Samarskaya Luka is a floristically heterogeneous area in which six elementary floras can be distinguished. This area has been assessed as a floristically autonomous formation, and its floristic representativeness was estimated.     

基于复杂系统建模的水管理政策研究进展

基于Agent的建模方法（ABSS）通过自下而上的方式，考察系统中主体的不同状态和行为特征、主体与环境的作用、主体之间的作用，来表征系统的宏观特征，是进行复杂社会环境系统分析和政策研究的重要手段，在水资源、水环境管理系统中得到了有效的应用。本文在大量文献调研的基础上，讨论了ABSS建模方法的基本原理、主要特征、系统构成、分类方法和开发工具等特征，总结了其供水系统发展、水资源分配和流域水资源管理、农业土地和水资源利用、居民用水行为、农业污染控制及人类活动的水环境影响等方面的应用，分析了其在研究内容、研究方法、研究结果等方面的发展趋势，讨论了利用该方法研究我国水资源管理和水污染控制政策的必要性和重要性。     

Effect of deuterium-depleted water on reproduction of rainbow trout

During the artificial reproduction of salmonides, the fecundity can be increased either by improving the viability of spermatozoa, or by extending the time period during which a roe micropile remains open, thus allowing its fecundation. Practically, this can be achieved by the use of some fertilising techniques suitable for fish species. Here, we show that the reproduction of rainbow trout in a 1:1 solution of deuterium-depleted water and distilled water led to a significant increase in survival of roes during their embryonic development. Moreover, the addition of glucose and fructose into the deuterium-depleted fertilising solutions led to a further increase in roe survival during embryonic development. The increase in survival is mainly explained by an increase in the motility of spermatozoa.