高烈度地震区隧道软硬围岩交接段刚柔并济抗减震技术研究*

为提高高烈度地震区隧道抗震性能，以某铁路隧道为研究背景，分析3种抗减震措施下隧道不同监测点隧道拱顶沉降、边墙收敛、衬砌结构PGA及最小安全系数，通过对比分析得到最优抗减震措施。结果表明:相比于工况1，工况2隧道拱顶沉降减小10.54%~81.10%，边墙收敛减小13.92%~78.77%，衬砌结构PGA减小31.42%~72.02%，最小安全系数增加18.04%~66.13%；相比于工况1，工况3结构拱顶沉降减小3.04%~18.02%，边墙收敛减小4.70%~32.00%，PGA增加13.95%~27.48%，最小安全系数增加7.49%~30.99%；工况4即“减震层+SFRC衬砌”刚柔并济法，相比于工况1，隧道拱顶沉降减小18.46%~83.98%，结构边墙收敛减小17.54%~85.47%，PGA减小30.00%~69.98%，最小安全系数增加47.95%~83.56%；4种工况抗减震性能由高到低依次为:工况4＞工况2＞工况3＞工况1。研究结果可为隧道软硬围岩交接段抗震设防提供理论参考。     

模糊综合评价法在钢铁企业安全投资合理性评价中的应用

为了对钢铁企业安全投资进行模糊综合评价,建立了钢铁企业安全投资的评价体系,确定各因素的权重。得出模糊综合评价矩阵,可对各因素进行评价分析;得出某钢铁企业安全投资现状分数为83.9分,等级为较好,需着重加强安全培训、劳保品、工业卫生等人因素方面的投资;在环境方面的投资较合理。     

洪涝灾害条件下疏散交通生成预测方法

为有助于有关部门更准确预测洪涝灾害受灾民众的疏散量,结合非集计数据和集计数据的优点,提出分区集计数据的概念,设计了受灾区域分区方法,并通过意向偏好(SP)调查法对我国居民在洪涝条件下疏散交通需求数据进行调查。在此基础上,引入BP神经网络建立基于分区集计数据的疏散交通生成预测模型。利用调查数据进行实证分析发现,所设计方法取得了较好的预测效果,鲁棒性较好,平均相对预测误差仅为1.8%,其预测效果明显优于现有的非集计和整集计模型。     

Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Abstract

Objective: With the overall goal to harmonize prospective effectiveness assessment of active safety systems, the specific objective of this study is to identify and evaluate sources of variation in virtual precrash simulations and to suggest topics for harmonization resulting in increased comparability and thus trustworthiness of virtual simulation-based prospective effectiveness assessment.

Methods: A round-robin assessment of the effectiveness of advanced driver assistance systems was performed using an array of state-of-the-art virtual simulation tools on a set of standard test cases. The results were analyzed to examine reasons for deviations in order to identify and assess aspects that need to be harmonized and standardized. Deviations between results calculated by independent engineering teams using their own tools should be minimized if the research question is precisely formulated regarding input data, models, and postprocessing steps.

Results: Two groups of sources of variations were identified; one group (mostly related to the implementation of the system under test) can be eliminated by using a more accurately formulated research question, whereas the other group highlights further harmonization needs because it addresses specific differences in simulation tool setups. Time-to-collision calculations, vehicle dynamics, especially braking behavior, and hit-point position specification were found to be the main sources of variation.

Conclusions: The study identified variations that can arise from the use of different simulation setups in assessment of the effectiveness of active safety systems. The research presented is a first of its kind and provides significant input to the overall goal of harmonization by identifying specific items for standardization. Future activities aim at further specification of methods for prospective assessments of the effectiveness of active safety, which will enhance comparability and trustworthiness in this kind of studies and thus contribute to increased traffic safety.     

A proactive process risk assessment approach based on job hazard analysis and resilient engineering

Complex systems often experience a long period of incubation before accidents occur. Therefore, a proactive risk assessment is essential for process safety. The conventional job hazard analysis (JHA) method has been an effective tool to conduct a process risk assessment in the high-risk industrial field. However, the conventional JHA is inadequate for the proactive risk assessment since it is usually conducted during and before one specific operation process. Operations such as startup and maintenance are performed repeatedly on the lifecycle of a plant. Therefore, the risk reduction measures for the industrial process should include not only preventive actions obtained from the conventional JHA but also recovery ones. Resilience engineering (RE) has proven to be helpful for the recovery analysis of a complex system. The objective of this paper is to propose a proactive and comprehensive process risk assessment approach based on JHA and RE. The mechanism of applying RE to address operation process risk is illustrated. The integrated approach can provide guidelines to establish proactive risk reduction measures as well as maintain a low-risk level. Finally, a gas transmission startup process risk assessment case is presented to demonstrate its applicability.     

矿热炉炉壳安装作业危险性分析

为减少事故损失,必须对矿热炉安装施工危险源进行分析。基于此,对矿热炉安装工序中最重要工序炉壳安装应用作业危险性分析进行分析。将炉壳安装作业分成3大部分,用鱼刺图分析方法进行分析,总结出矿热炉炉壳安装中事故发生的主要原因并提出对策措施,以预防和减少事故的发生。     

情感诉求对交通安全广告效果的影响

为检验交通公益广告中情感诉求变化对广告效果的影响,采用试验法操作广告情感诉求类型,使用眼动技术和Go/no-go联想测验(GNAT),通过比较不同效价和唤醒度的情感诉求广告对受众的注意力和内隐态度的影响,评估交通安全广告情感诉求类型的说服效果。研究发现:被试对低唤醒广告文字区的眼动注视时间和注视点个数显著长于/多于对高唤醒广告文字区的注视时间和注视点个数;被试观看高唤醒消极的广告后,正确驾驶行为的积极态度显著下降,而低唤醒消极/高唤醒积极/低唤醒积极的公益广告对于被试的内隐态度的改变没有显著差异。结果表明,高唤醒度积极广告能够提升受众的注意力,而高唤醒度消极广告则会损害受众对正确驾驶行为的内隐态度。     

企业需要建立人性化的安全管理

由于我国对企业特别是海外来大陆投资的企业，缺乏严格的安全管理手段，致使不少企业屡次出现安全事故。为了减少企业安全事故的发生，提高企业安全度，要求企业在贯彻“安全第一，预防为主”的基本方针的基础上。建立“以人为本。以制度和伦理道德为约束的人性化的安全管理系统”。本文给出了该系统的模型，并对此模型进行了分析和解释，探讨了相关的几个理论基础，最后给出了人性化安全管理的实质。通过该系统的管理执行，使企业在尊重人权、尊重生命的前提下发展壮大，最终实现安全的全球化。     

我国硒淡水水生生物水质基准值推导

水体中硒含量过高会导致水生生态系统退化,而中国现有的地表水环境质量标准对硒的标准值设定并不是基于我国水生生物相关毒理学研究得出的,难以因地制宜地保护我国水生生物.为保护我国水生生物,本研究利用物种敏感度分布法,推导出基于最大无效应浓度（NOEC）、最低有效应浓度（LOEC）的慢性硒（无机）淡水水质一级基准值和基于半数致死效应浓度（LC₅₀）、半数最大效应浓度（EC₅₀）、半数抑制浓度（IC₅₀）的急性硒（无机）淡水水质二级基准值分别为0.58 μg·L^-1、0.52 mg·L^-1,发现我国现有的水质标准可能会对我国水生生物造成欠保护.进一步推导出为保护我国鱼类的硒（无机）淡水水质一级、二级基准值分别为0.21 μg·L^-1、1.60 mg·L^-1,以及硒淡水鱼类饲料有机硒和无机硒含量一级基准值分别为97 μg·kg^-1和98 μg·kg^-1.本研究基于硒对水生生物的急性和慢性毒性效应,推导出硒的系列基准值,为保护我国淡水水生生物安全的标准制定提供数据支撑和科学依据.     

上海市机动车污染实时排放预警系统设计与应用

研究上海市机动车污染的动态排放测算和网格化动态排放清单构建,在实时的交通数据和交通环境监测数据的基础上,结合交通模型、机动车排放清单模型等业务模型和算法,依托大数据存储、可视化和GIS等技术,开发了上海市机动车污染物实时排放预警系统,实现了上海市全市道路的机动车动态排放测算、交通环境政策实施情景模拟和网格化排放清单,更新频率为每30 min一次,包含PM、NOx、CO、SO2、VOCs等污染物和9种车型。系统建成后直接服务于首届中国国际进口博览会,为大气污染排放实时总量跟踪评估、污染源管控措施分析及监测成因分析等提供了有力的实时数据和技术支撑。