可张孔曝气器曝气能耗试验研究

通过试验研究，总结出可张孔曝气阻力损失的影响因素，以优化产品的结构设计参数，降低产品在工程应用中的能耗，获取更好的经济效益。     

Effects of SO2 and H2O on low-temperature NO conversion over F-V2O5-WO3/TiO2 catalysts

F-V_2 O_5-WO3/Ti02 catalysts were prepared by the impregnation method.As the content of F ions increased from 0.00 to 0.35 wt.%,the NO conversion of F-V_2 O_5-WO_3/TiO_2 catalysts initially increased and then decreased.The 0.2 F-V_2 O_5-WO_3/TiO_2 catalyst(0.2 wt.% F ion)exhibited the best denitration(De-NOx) performance,with more than 95% NO conversion in the temperature range 160-360℃,and 99.0% N2 selectivity between 110 and 280℃.The addition of an appropriate amount of F ions eroded the surface morphology of the catalyst and reduced its grain size,thus enhancing the NO conversion at low temperature as well as the sulfur and water resistance of the V_2 O_5-WO3/Ti02 catalyst.After selective catalytic reduction(SCR) reaction in a gas flow containing SO_2 and H_2 O,the number of NH3 adsorption sites,active component content,specific surface area and pore volume decreased to different degrees.Ammonium sulfate species deposited on the catalyst surface,which blocked part of the active sites and reduced the NO conversion performance of the catalyst.On-line thermal regeneration could not completely recover the catalyst activity,although it prolonged the cumulative life of the catalyst.In addition,a mechanism for the effects of S02 and H_2 O on catalyst NO conversion was proposed.     

基于边介数的省域生态廊道构建方法优化

我国城市建设和生态保护工作均对土地资源有大量需求,二者之间的矛盾在经济优先发展区表现尤为明显.为了有效地改善生态环境,管控土地利用并引导其变化发展,需要建设具备不可替代特征的省域生态廊道.最小累积阻力模型（minimum cumulative resistance,MCR）是识别生态廊道最常用、有效的模型,但在应用于省域尺度时,MCR模型识别的潜在廊道路由存在冗余的问题.因此,通过引入网络科学中的边介数指数（edge-betweenness）对MCR模型进行优化,计算潜在廊道路由的边介数指数值,选取出其中最为重要和简明的结构来连通生态源地,即提取潜在路由中的骨干路由（backbone route）和关键战略点（key strategic point）作为不可替代的结构来指导省域生态廊道建设.将优化后的MCR模型应用于广东省,构建了全长5 493 km的省域生态廊道,其中包含生态源地20处,关键战略点11个,骨干生态廊道29条.骨干路由与关键战略点构成的不可替代省域生态廊道（irreplaceable provincial corridor）能够实现"廊道数量和占地面积最少、连通性基本不变"的目标.研究显示,边介数能够对潜在路由进行优化筛选,识别出维护省域生态安全的关键结构;不可替代生态廊道能够指导省域生态规划和土地空间的发展利用,并为更高水平的生态安全环境提供了演进的基础;同时也为土地资源紧张的地区提供了建设生态廊道的参考与依据.      

芳纶纤维对飞机尾翼结构抗鸟撞性能影响研究

目的研究飞机尾翼结构采用芳纶纤维复合材料的抗鸟撞性能。方法根据芳纶纤维夹芯和芳纶纤维层合板两种飞机尾翼前缘构型,分别建立有限元模型进行仿真计算,分析两种构型鸟撞后的损伤和变形,并对两种构型进行抗鸟撞性能研究试验。结果芳纶夹芯前缘构型前缘凹陷,前梁没有破裂;芳纶层合板前缘构型前缘破裂,前梁有破损。试验结果与仿真分析结果高度吻合。结论芳纶夹芯前缘构型比芳纶层合板前缘构型具有更好的抗鸟撞性能。芳纶纤维层合板构型会造成前缘蒙皮变形过大,前梁腹板破损,导致飞机鸟撞后维修成本较高。     

四环素胁迫对Shigella flexneri细菌四环素抗性基因抗性表达的影响过程

四环素(TC)抗生素在不同环境介质中已被广泛检出,为研究其对四环素抗性基因(TC-ARGs)丰度变化及表达水平的影响过程,以从活性污泥中筛选和纯化分离获得的弗氏志贺氏菌(Shigella flexneri)为研究对象,考察了不同浓度TC对其生长过程的作用影响,采用荧光定量PCR和逆转录PCR方法定量检测了不同抗性机制TC-ARGs,包括tetC、tetO和tetX基因的丰度变化及表达水平,并探讨了TC浓度与TC-ARGs丰度及其表达水平之间的相关关系.结果表明,在培养周期内(24 h),TC胁迫对Shigella flexneri细菌的生长具有抑制作用,细菌细胞浓度增长速率随TC暴露浓度的升高而降低,但对TC-ARGs丰度变化影响较小.TC胁迫能够促进Shigella flexneri细菌TC-ARGs的转录表达,tetC、tetO和tetX基因表达水平在整个培养周期内均先升高后降低.由相关性分析可知,TC浓度与TC-ARGs丰度及其表达水平之间相关关系不显著,但tetC和tetO基因丰度与其转录表达水平之间存在显著的正相关关系,表明其基因丰度一定程度上可用来衡量和评价其抗性表达水平.     

基于土地利用与植被恢复情景的土壤侵蚀演变特征

基于土地利用与植被恢复情景,使用USLE和土壤风蚀方程对坝上地区水蚀和风蚀强度进行估算。结果表明：（1）2015年坝上地区风蚀、水蚀和总侵蚀强度均值分别为8.83±5.15 t·ha^-1·a^-1、4.37±6.62 t·ha^-1·a^-1和13.22±8.18 t·ha^-1·a^-1;风蚀占总侵蚀67%,水蚀占33%。（2）土地利用调整情景下,风蚀、水蚀和总侵蚀强度分别减少4.9%~9.9%、2.9%~8.3%和4.3%~9.3%;土地利用+植被恢复情景下,风蚀、水蚀和总侵蚀强度则分别减少6.3%~13.8%、5.2%~16.2%和5.9%~14.3%。（3）土地调整面积与风蚀强度减少率呈对数关系,与水蚀强度减少率呈指数关系,与总侵蚀强度减少率呈线性关系（P<0.01）。本文结果可以为土壤侵蚀方程计算及区域土壤侵蚀防治提供数据参考。     

喷丸强化技术在某型作动筒延寿修理中的应用

目的将某型作动筒的寿命由6000±150起落延长至12 000±150起落。方法采用喷丸强化技术对作动筒的主要承力零件进行喷丸强化处理,提高零件的抗疲劳和抗应力腐蚀性能。通过疲劳寿命试验验证对比喷丸强化处理前后典型零件和作动筒的寿命指标是否达到了预期目标。结果喷丸强化处理前的3件前耳环螺栓试验循环次数均未超过1.8×10~6即断裂,喷丸强化后达到3.6×10~6时仍未断裂。喷丸强化处理后的4件主耳环螺栓与喷丸强化处理前对比,断裂时的试验循环次数均有不同程度的提高,均值寿命比值大于2.36。喷丸强化处理前后的主前作动筒疲劳寿命试验达到预期的循环次数时,均没有出现断裂或者损坏。结论喷丸强化处理能有明显提高作动筒的抗疲劳和抗应力腐蚀性,强化处理后的零件疲劳寿命能够超过处理前的2倍,可以采用喷丸强化技术延长作动筒的使用寿命。     

Analysing the sensitivity behaviour of two hydrology models

Recently, the New Morris Method has been presented as an effective sensitivity analysis tool for mathematical models. The New Morris Method estimates the sensitivity of an output parameter to a given set of input parameters (first-order effects) and the extent these parameters interact with each other (second-order effects). This method requires the specification of two parameters (runs and resolution) that control the sampling of the output parameter to determine its sensitivity to various inputs. The criteria for these parameters have been set on the analysis of a well-behaved analytical function (see Cropp and Braddock, Reliab. Eng. Syst. Saf. 78:77–83, 2002), which may not be applicable to other physical models that describe complex processes. This paper will investigate the appropriateness of the criteria from (Cropp and Braddock, 2002) and hence the effectiveness of the New Morris Method to determine the sensitivity behaviour of two hydrologic models: the Soil Erosion and Deposition System and Griffith University Representation of Urban Hydrology. In the first case, this paper will separately analyse the sensitivity of an output parameter on a set of input parameters (first- and second-order effects) for each model and discuss the physical meaning of these sensitivities. This will be followed by an investigation into the sampling criteria by exploring the convergence of the sensitivity behaviour for each model as the sampling of the parameter space is increased. By comparing these trends to the convergence behaviour from Cropp and Braddock (2002), we will determine how well the New Morris Method estimates the sensitivity for each model and whether the sampling criteria are appropriate for these models. It will be shown that the New Morris Method can provide additional insight into the functioning of these models, and that, under a different metric, the sensitivity behaviour of these models does converge confirming the sampling criteria set by Cropp and Braddock.     

Study of Meteorological Aspects and Urban Concentration of SO2 in Atmospheric Environment of La Plata, Argentina

This article presents and discusses SO₂ (ppbv) concentration measurements combined with meteorological data (mainly wind speed and direction) for a five-year campaign (1996 to 2000), in a site near an oil refinery plant close to the city of La Plata and surroundings (aprox. 740.000 inh.), considered one of the six most affected cities by air pollution in the country. Since there is no monitoring network in the area, the obtained results should be considered as medium term accumulated data that enables to determine trends by analyzing together gas concentrations and meteorological parameters. Preliminary characterization of the behaviour of the predominant winds of the region in relation with potential atmospheric gas pollutants from seasonal wind roses is possible to carry out from the data. These results are complemented with monthly averaged SO₂ measurements. In particular, for year 2000, pollutant roses were determined which enable predictions about contamination emission sources. As a general result we can state that there is a clear increase in annual SO₂ concentration and that the selected site should be considered as a key site for future survey monitoring network deployment. Annual SO₂ average concentration and prevailing seasonal winds determined in this work, together with the potential health impact of SO₂ reveals the need for a comprehensive and systematic study involving particulate matter an other basic pollutant gases.     

中国水环境的NPSP问题及对策

介绍了我国水环境中的非点源污染（ＮｏｎｐｏｉｎｔＳｏｕｒｃｅｐｏｌｌｕｔｉｏｎ，缩写为ＮＰＳＰ）的情况，强调农业生产是最主要的非点源污染。同时，针对我国水污染防治的政策目标，提出一些建议。