Toxicological Assessment of Wastewater and Runoff from the Baikal Pulp and Paper Mill

Russian Journal of Ecology -     

废旧塑料回收利用技术

从我国废塑料回收利用的现状出发 ,分析了今后我国废塑料回收利用技术的发展趋势和应采取的措施 ,指出了废塑料回收利用的重要性。     

清洁生产工艺在造纸工业中的应用

介绍了清洁生产这个新概念,清洁生产工艺在造纸工业中的应用,实例表明:造纸废水再循环,不准能节约水资源,节约能源,防止环境污染,而且可以取得良好的经济效益和社会效益,为造纸废水在2000 年前达到国家排准排放奠定了良好基础     

变速器壳体低周疲劳优化设计

目的 分析变速器壳体驻车耐久试验的失效根本原因,对变速器壳体进行低周疲劳优化设计.方法 首先排查壳体的化学成分、铸造质量,排除材料和工艺引起失效问题的可能性,然后通过有限元方法分析驻车轴孔的最大拉应变、驻车工况壳体变形、轴孔接触区域.根据局部应变分布特征,提出驻车轴修形的优化方案,并且根据壳体材料的低周疲劳参数,确定Coffin-Manson模型,并根据该模型预测壳体驻车轴孔优化前后的疲劳寿命.结果 驻车轴孔的最大拉应变高达0.95％,确定应变过大是导致壳体失效的根本原因.驻车轴度修形的优化方案将最大拉应变降低到0.40％,塑性应变占比由42％降低到5％,疲劳寿命的预测值由原来的175次提高到7980次,满足试验循环次数1000次的要求,最终优化物理样机通过了驻车耐久试验验证.结论 使用的Coffin-Manson模型参数能准确地预测变速器壳体的低周疲劳寿命,驻车轴小角度修形优化方案能够有效解决局部应变过大的失效问题,具有一定的工程参考意义.     

减振复合钢板的成形性及其数值模拟研究进展

减振复合钢板是一种应用于汽车覆盖件方面的新型材料 ,有利于减振和减轻重量。介绍了其成形性和成形过程数值模拟的研究进展 ,并对未来发展进行了展望     

Analysis of the hydrocyclone stock cleaning process for wasted fibre in a paper mill

The main objective of this project was to evaluate the possibility of reducing the quantity of fibre wasted at one of many hydrocyclone (centrifugal) cleaning processes in a paper mill. It was found that the application of elutriation water to both the tertiary and quaternary cleaners was essential to minimise the fibre discharged to the sewer, and the pressure of this elutriation water had a dramatic effect of reducing the fibre wastage. Accordingly, it has been shown that 150–160 kPa as the optimum pressure range to apply elutriation water to minimise the product grade fibre wasted whilst sending undesired shive fibre to the sewer. Also, monitoring of the press uhle box wastewater revealed that the paper mill has the potential to make substantial cost savings by reducing the waste stream. Further investigation is necessary to determine the types of fibre that are being wasted, and the viability of a screen to recycle the wasted fibre to the process. However, these fibres may be unsuitable to reuse in the process and alternative uses must be found.     

塑料薄膜用无滴消雾剂的研制

本文介绍了塑料薄膜用无滴消雾剂的配方、制备方法和使用情况。     

含硫污水系统耐蚀材料的筛选与应用

针对西北地区一综合炼油厂含硫污水管线的严重腐蚀问题，分析了腐蚀原因，确立了材料筛选方案，通过实验室静态挂片试验绘制了重量损失率变化曲线和现场挂片等试验手段，筛选推荐出了树脂玻璃钢耐蚀材料。工业生产应用结果表明，MFE-2型树脂玻璃钢是适用于该厂含硫污水系统的耐蚀材料，为类似装置的长周期运行提供了借鉴和经验。     

中国废旧农用塑料薄膜的回收与利用

介绍了中国废旧农用塑料薄膜回收利用的现状 ;重点阐述了中国废旧农膜再生造粒技术 ,从工艺、成本利益、再生粒料的应用市场等各方面对该技术进行了详细的介绍和剖析 ,在论述其优越性的同时 ,指出了再生造粒技术存在的问题 ,为研究人员今后的研究工作指明了方向 ;最后对废旧农膜再生造粒技术的应用前景进行了展望。     

Reasons for non-participation in a kerbside recycling scheme

In this article potential barriers to recycling are explored within a UK community of approximately 8000 households that are piloting a kerbside paper recycling scheme. All 1690 non-users of the scheme were surveyed for their decisions not to participate. A 43% response rate was generated from the survey and the reasons given by householders were coded into 12 categories. The main reasons for non-participation included insufficient paper and lack of space in which to locate the recycling bin. 62% of the non-participants reported that they were recycling paper using other facilities such as local bring schemes and charity collections. Strategies to increase participation in the kerbside scheme are suggested.