唐钢2×150t转炉煤气回收系统设计及运行实践

在此较详细地介绍了唐钢一炼钢厂 2× 15 0t转炉煤气回收湿法除尘工艺和系统的技术特点。该系统设计吸收了国内外大型转炉煤气回收的经验。经近 18个月的生产实践 ;认为效果良好 ,煤气回收率近 80 % ,热值近 80 0 0kJ Nm3,放散排放浓度小于 80mg m     

车门框条滚压成形工艺及滚压线设计

以X110型车门为例,分析零件工艺性,介绍滚压成形工艺过程,强调在模具设计和制作中应注意的问题。设计由滚压、校正、滚焊和自动断料等工艺流程组成的滚压线,可作为类似滚压工艺参考。     

Human appropriation of net primary production as determinant of avifauna diversity in Austria

The relationship between land-use induced changes in production ecology and avifauna diversity was analysed using a GIS land cover dataset on a 0.25 km × 0.25 km grid covering Austria's national territory. Considering only aboveground processes, the “human appropriation of net primary production” (HANPP = potential NPP − NPP_t), actual NPP (NPP_act), harvest (NPP_h) and NPP_t (= NPP_act − harvest) were recalculated based on existing datasets. Elevation as well as indicators of land cover heterogeneity and landscape heterogeneity were also considered. Correlation analyses were performed between these potential determinants of avifauna diversity and breeding bird species richness data as well as the percentage of endangered breeding birds included in the Austrian red list. Four spatial scales—0.25 km × 0.25 km, 1 km × 1 km, 4 km × 4 km and 16 × 16 km, were analysed. It was shown that breeding bird species richness was more strongly correlated with production ecological indicators and elevation than with heterogeneity indicators. A residual analysis in which the effect of elevation (a proxy for climate) on species richness and its potential determinants was removed confirmed the importance of the availability of trophic energy (NPP) for bird diversity patterns. The results support the species-energy hypothesis, thus confirming the notion that HANPP could be a useful pressure indicator for biodiversity loss.     

压盖落料冲孔成形模设计

介绍了在尺寸公差及形位公差要求较高的落料冲孔成形件的模具设计过程中，不降低劳动效率的情况下，如何使模具简化、降低模具成本，并使冲压件满足其设计要求。     

跌水曝气——改进型填料(滤料)排水系统处理屠宰废水的设计

对屠宰厂原有的排水管道系统进行改造和革新 ,使之成为沉淀、厌氧好氧生物接触氧化与过滤的新型排水系统 ,用于屠宰废水处理 ,实现了达标排放     

新型伞形罩烟气洗涤器的性能研究

针对中小型燃煤锅炉的粉尘和二氧化硫等有害气体的污染问题,开发出一种新型伞形罩烟气洗涤器。以粉煤灰、空气和水为物系,测试了伞形罩烟气洗涤器的压降(ΔP)、除尘效率和动力消耗。实验的入口气速为10～18m/s,含尘浓度为2～22g/m3,液气比(L/G)0～0.8L/m3。结果表明:伞形罩洗涤器的ΔP较小,在250～750Pa范围内;当L/G为0.2L/m3时,除尘效率达98.8%以上,动力消耗约0.06×10-3kW.h/m3(气体约216Pa),实现节能高效的目的。     

环境承载力与环境扶贫

随着人类环境意识的觉醒与升华，引发了对自身生存环境的更深层次的思考。本文就环境承载力的内涵与外延以及它既会造成贫困又可解脱贫困的关键作用进行了研究和探讨。     

磷肥厂烘干磨高压静电除尘技术及应用

本文根据高压静电除尘的原理,磷肥厂烘干磨粉尘的特性分析,以及作者本人的工作实践,探讨了高压静电除尘技术在磷肥厂烘干磨粉尘治理中应用的可行性。     

长江上游森林植被变化对削洪减灾功能的影响

长江上游具有形成暴雨洪水的地形与气候条件，森林植被削洪减灾功能的提高必须着眼于森林植被—土壤生态系统结构的改善，削洪减灾功能的提高是通过林冠层、枯枝落叶层和土壤层对雨水的截留拦蓄作用实现的。研究区森林植被—土壤生态系统区域差异明显，不同地区该系统林冠层、枯枝落叶层和土壤层的最大截持水量不同，该系统削洪减灾功能的大小不仅与降雨特点有关，而且与系统各水文层前期持水量有关。在连续长时间暴雨情况下，森林植被—土壤生态系统除对第一次洪峰有削减作用外，对后续暴雨洪水的削减作用不明显，甚至会使洪峰增高。根据宜昌站30d洪水量的地区组成和森林植被—土壤生态系统截留持水功能的特点，提出了长江上游森林植被恢复、重建与保护的宏观调控对策。     

On the thermal rupture of 1.9 m propane pressure vessels with defects in their thermal protection system

This paper describes the results from a series of fire tests that were carried out to measure the effect of defects in thermal protection systems on fire engulfed propane pressure vessels.

In North America thermal protection is used to protect dangerous goods rail tank-cars from accidental fire impingement. They are designed so that a tank-car will not rupture for 100 min in a defined engulfing fire, or 30 min in a defined torching fire. One common system includes a 13 mm blanket of high-temperature ceramic fibre thermal insulation covered with a 3 mm steel jacket. Recent inspections have shown that some tanks have significant defects in these thermal protection systems. This work was done to establish what levels of defect are acceptable from a safety standpoint.

The tests were conducted using 1890 l (500 US gallon) ASME code propane pressure vessels (commonly called tanks in the propane industry). The defects tested covered 8% and 15% of the tank surface. The tanks were 25% engulfed in a fire that simulated a hydrocarbon pool fire with an effective blackbody temperature of 870 °C.

The fire testing showed that even relatively small defects can result in tank rupture if the defect area is engulfed in a severe fire, and the defect area is not wetted by liquid from the inside. A wall failure prediction technique based on uniaxial high-temperature stress rupture test data has been developed and agrees well with the observed failure times.