湘南地区杂柑天草高接换冠关键技术

天草杂柑的高接换冠的关键技术主要是：注意选择母树并适当修剪；合理采穗和保湿；科学嫁接；嫁接后精心管理．     

Acceleration of floc-water separation and floc reduction with magnetic nanoparticles during demulsification of complex waste cutting emulsions

Waste cutting emulsions are difficult to treat efficiently owing to their complex composition and stable emulsified structure. As an important treatment method for emulsions, chemical demulsification is faced with challenges such as low flocs–water separation rates and high sludge production. Hence, in this study, Fe₃O₄ magnetic nanoparticles (MNPs) were used to enhance chemical demulsification performance for treating waste cutting emulsions under a magnetic field. The addition of MNPs significantly decreased the time required to attain sludge–water separation and sludge compression equilibrium, from 210 to 20 min. In addition, the volume percentage of sludge produced at the equilibrium state was reduced from 45% to 10%. This excellent flocculation–separation performance was stable over a pH range of 3–11. The magnetization of the flocculants and oil droplets to form a flocculant–MNP–oil droplet composite, and the magnetic transfer of the composite were two key processes that enhanced the separation of cutting emulsions. Specifically, the interactions among MNPs, flocculants, and oil droplets were important in the magnetization process, which was controlled by the structures and properties of the three components. Under the magnetic field, the magnetized flocculant–MNP–oil droplet composites were considerably accelerated and separated from water, and the sludge was simultaneously compressed. Thus, this study expands the applicability of magnetic separation techniques in the treatment of complex waste cutting emulsions.     

Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

无机痕量分析中预富集技术的应用现状及前景

综述了预富集技术在无机痕量分析中的应用，概述了国内外最新进展，介绍了主要技术及方法的特点，大量文献表明预富集技术用于痕量分析取得满意的效果，降低了检测限，提高了灵敏度。     

Mechanics Principle and Engineering Application of Split Layer and Bed Separation of Mining Overburden

<正>To control land surface subsidence caused the underground mineral exploitation and the catastrophic phenomena such as serious damage of buildings, waterbodies, cultivated lands, railways, bridges caused by land subsidence, bed separation grouting technology of overburden is put forward. To provide theoretical support for the technology, the characteristics and the mechanics mechanism of mining overburden from layer-split to formation of bed separation are studied. On the basis of elastic sheet board theory, calculation formula of rock sheet deflection is presented, and the mechanics criteria of the separation formation and the calculation formula of bed separation volume are set up. Finally, the applications and technics of bed separation grout technology of mining overburden to control land subsidence in china are introduced.     

1000t/d含油废水旋流分离技术及设备研究

将实验室研制的 HL 型旋流器用压力容器式方式并联起来 ,建立 10 0 0 t/ d规模的示范装置 ,并进行试验。示范装置的试验结果表明 ,与工业测试比较 ,HL型旋流器并没有因为规模的放大而造成性能下降 ,它能取代石化行业目前采用的“一隔二浮”流程中的大部分装置 ,具有明显的经济效益和广阔的应用前景     

皮革废水物化处理工艺整改的试验研究

在扬州某皮革厂原有的废水处理设施基础上，采用浓淡分流，药剂调整等方法。对其物化处理部分进行整改。结果表明，用Fe2SO4作混凝剂处理浓废水及用复合混凝剂处理淡废水，效果较好。处理后，可减少排放废水CODcr约1252t／a。处理成本从原来的4.03元／t降到1.30元／t。同时，降低了加药量的控制难度与加药频率，减轻了工人的劳动强度。     

膜法水处理技术及研究进展

综述了反渗透、微滤、超滤、纳滤、渗透蒸发、液膜等几种常见膜技术的应用现状及进展情况 ,主要对反渗透膜的原理、流程、存在的问题及开发和利用情况进行了介绍。简单概括了近年发展起来的双极膜等新膜分离技术的开发研究。展望了膜分离技术的前景     

城市垃圾污染防治对策探讨

从城市拉圾产生的机制入手，分析了城市垃圾污染产生的原因，并对目前所采取的主要处理方法人季简要评述，在此基础提出了实现城市垃圾最小量化，推动垃圾资源化产业、提高垃圾无害化处理水平，中化监督管理等几点城市垃圾污染防治的对策。