Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

温度对氨法脱硫率影响的实验研究

对使用氨（NH3）脱除烟气中气态污染物的技术进行了分析和总结，认为氨洗涤法洗涤净化烟气是一种很有前景的方法，并就温度对SO2脱除率的影响进行了实验研究。实验研究结果显示，当温度超过54℃时，NH3对SO2仍有很高的脱除率。并根据实验结果建议，在实际氨法脱硫工程中，脱硫过程温度宜控制在60℃以下或在80℃以上。     

连州电厂湿法烟气脱硫系统的综合评价

从技术性能、经济性能两方面对连州电厂的广东省首套石灰石 /石膏湿法烟气脱硫系统进行了全面的评价     

烟气脱硫工艺的选择

论述了现今国内外烟气脱硫的现状及烟气脱硫工艺的分类，国内外较为先进的烟气脱硫工艺的机理及特点，且对不同的脱硫技术的优缺点进行了全面的比较，对需要进行脱硫的装置现状了科学地分析，并最终提出选择合理的脱硫工艺的方法及注意的问题。     

湿式高效除尘脱硫装置的试验研究

本文介绍了一种高效除尘脱硫装置──三相流化床的性能和原理，并对三相流化床除尘脱硫工业中试系统的试验结果进行了分析．试验表明三相流化床除尘效率可达９８％，脱硫效率达７０％，运行安全可靠．     

锅炉烟气脱硫技术发展综述

在调查研究的基础上，论述国内外烟道气脱硫技术的发展与前景，提出开发生产适合我国国情的烟气脱硫技术势在必行。还简要介绍了最为普遍的石灰／石灰石法脱硫基本原理。     

湿法烟气脱硫的腐蚀机理及防腐技术

综述了湿法烟气脱硫的腐蚀与防腐现状，分析了腐蚀环境及腐蚀机理，并概括总结了湿法烟气脱硫工艺系统中材料防腐技术和工艺防腐技术，对此法的现场实际应用有一定的指导意义。     

湿法烟气脱硫添加剂的试验研究

采用我校自主设计研制的水浴脱硫设备,以石灰石为脱硫剂,通过模拟烟气净化冷态模型试验研究了甲酸,乙酸,已二酸,草酸作为有机添加剂对湿法烟气脱硫的影响,并讨论了其机理.试验结果表明,有机酸添加剂能减缓脱硫液pH值的降低过程,能在较低的pH值时得到较高的脱硫率.实验结果为有机添加剂在湿法脱硫中的应用提供了理论依据.     

煤气洗涤废水的处理研究

本研究对特难处理的煤气洗涤废水，采用混凝──电化学氧化处理，可获得良好的处理效果．其ＣＯＤ、油、酚分别由１０３２２ｍｇ／Ｌ、１５０００ｍｇ／Ｌ、１５７０ｍｇ／Ｌ降至２８９ｍｇ／Ｌ、１００ｍｇ／Ｌ、０．５ｍｇ／Ｌ．去除率分别为９７．２％，９３．３％，９９．９７％．     

喷雾干燥法烟气脱硫过程的模拟试验研究

本文模拟试验研究了喷雾干燥法烟气脱硫中脱硫渣再循环利用、气体参数（ＳＯ２浓度、气速、气温）及浆液参数等对脱硫过程的影响，并分析了喷雾干燥塔内传热传质过程。本文结果将有助于改进喷雾脱硫塔的设计和操作。