β-环糊精/醋酸纤维素纳米纤维的制备及对染料废水的处理

制备了不同β-环糊精(β-CD)含量的醋酸纤维素(CA)纳米纤维膜,并对纤维膜的结构形貌、尺寸分布、孔隙率、比表面积以及纤维膜的力学性能进行表征分析。随后研究了不同β-CD含量、初始浓度、吸附时间下,纳米纤维膜对甲基红染料的截留性能和吸附性能。结果表明:过量(≥30%)的β-环糊精会使纳米纤维产生珠节,纤维的形貌和力学性能变差;吸附试验表明,β-CD的加入提高了CA纳米纤维膜对染料的吸附,MR吸附率可达93.48%,最大平衡吸附量可达181.74 mg/g,比纯CA纳米纤维膜提高了将近40%;此外,染料的截留实验表明,纳米纤维膜对染料的截留效果较差,最大截留率为50.35%。     

论泥炭纤维素碳同位素组成作为东亚季风强度变化代用指标的可行性:吉林3个临近发育的泥炭地泥炭剖面的横向比对

降雨量通常与东亚季风强度成正比,而植物纤维素碳同位素组成又与降雨量成反比,因此泥炭纤维素碳同位素比值通常作为东亚季风强度变化的代用指标。由于季风影响的广泛性和区域性,临近发育的泥炭地植物纤维素碳同位素序列应该高度相关。为了验证这种假设,我们系统比较了吉林3处泥炭地3个泥炭剖面苔草纤维素2000年来的碳同位素序列。14 C时标控制的3个序列不呈现有意义的相关关系。不同时段,如过去500年、1000年、1500年和2000年来序列的长期趋势也不相关,序列中包含的周期完全不同。这些事实说明3处剖面苔草纤维素碳同位素比值记录的是当地性的而不是区域性的气候或环境信号,将泥炭纤维素碳同位素比值作为东亚季风强度变化的代用指标的合理性值得怀疑。     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

降解纤维素产甲烷的四菌复合系

自然环境中通常是微生物群落协同完成纤维素的降解,构建可降解纤维素的混菌体系是认识微生物相互作用的关键.利用富集培养法,结合变性梯度凝胶电泳(DGGE)指纹检测技术以及厌氧滚管技术,建立了一种筛选简单降解纤维素产甲烷复合菌系的方法.利用此方法从青藏高原若尔盖高寒湿地分离到一个由4株菌构成的降解纤维素产甲烷的稳定菌系.结果表明,该复合菌系由纤维素水解菌Clostridium glycolicum、非纤维素水解菌Trichococcus flocculiformis和Parabacteroides merdae、产甲烷古菌Methanobacterium subterraneum等具有不同功能的4种菌株组成,且在这4株菌的共同作用下可将纤维素直接转化为CH4.该简单复合系的获得为今后纤维素转化甲烷复合菌系的代谢控制和遗传改造提供了一个平台.     

纸板碳化电极提高生物电化学系统产电效率微生物机理研究

采用Solexa高通量测序技术和蛋白定量方法,分析了碳化纤维素纸板制备的层状波纹碳(LCC)电极与石墨板(GP)电极在生物电化学系统运行过程形成的生物膜微生物群落结构和生物量差异.结果表明,LCC电极良好的生物电化学性能不仅取决于其良好的导电性能,还与其表面生物膜微生物群落结构有关;LCC电极表面生物膜微生物量高,且对产电微生物的富集效果好.LCC电极与GP电极表面生物膜分别得到16S rRNA基因V3区优化序列12643条和12837条,经97%相似度归并后获得的OTUs数量分别为2786和3130;α多样性分析显示,GP电极生物膜微生物多样性相对更丰富.Proteobacteria、Firmicutes和Bacteroidetes在两种电极生物膜中含量最为丰富,这3个门细菌序列数分别占总序列数的76%(LCC)和85%(GP).在属分类水平上,LCC电极生物膜由383个属的细菌构成,而GP电极生物膜则有456个属.深入分析电极生物膜微生物群落结构有助于进一步认识LCC电极提高生物电化学系统产电效率的机理.     

Process of rice straw degradation and dynamic trend of pH by the microbial community MC1

The process of the rice straw degradation in the fermentor with aeration at 290 ml/h was studied. The results of dissolved oxygen （DO） indicated that the optimum DO during cellulose degradation by microbial community MC1 ranged from 0.01 to 0.12 mg/L. The change model ofpH values was as follows： irrespective of the initial pH of the medium, pH values decreased rapidly to approximate 6.0 after being inoculated within 48 h when cellulose was strongly degraded, and then increased slowly to 8.0--9.0 until cellulose was degraded completely. During the degradation process, 15 kinds of organic compounds were checked out by GC-MS. Most of them were organic acids. Quantity analysis was carried out, and the maximum content compound was ethyl acetate which reached 13.56 g/L on the day 4. The cellulose degradation quantity and ratio analyses showed that less quantity （under batch fermentation conditions） and longer interval （under semi-fermentation conditions） of rice straw added to fermentation system were contributed to matching the change model of pH, and increasing the quantity and ratio of rice straw degradation during cellulose degrading process. The highest degradation ratio was observed under the condition office straw added one time every five days （under semi-fermentation conditions）.     

生物膜法污水处理用新型纤维素载体的制备与性能

以麦草浆粕为原料,研究开发出了一种适用于生物膜法污水处理的多孔生物膜载体.实验通过对麦草浆粕碱化、黄化制备出酯化均匀的纤维素粘胶,并在此基础上选取合适的发泡成孔技术和纤维素再生工艺得到多孔纤维素载体成品.实验考察了各制备条件对载体性能的影响,总结出了该工艺下性能最优的载体的制备条件.研究结果表明,制得载体的孔隙率可达85%,比表面积在11m2·g-1以上,孔径从100μm～800μm均可人为控制.制得的多孔纤维素载体成本低廉,用于污水处理效果十分良好.     

季铵化木屑纤维素的制备及其对水中苯酚的吸附性能研究

以3-氯-2-羟丙基三甲基氯化铵(CTA)为醚化剂,对木屑纤维素进行了改性。探讨了改性木屑纤维素用量、pH值、吸附温度、吸附时间和苯酚初始浓度等因素对静态吸附效果的影响。结果表明,木屑纤维素经改性后,对水中的苯酚的吸附过程存在化学吸附,对水中的苯酚的吸附容量得到明显提高。     

Effects of Smoke Emissions from a Charcoal Kiln on the Functioning of Forest Soil Systems: A Microcosm Study

Long-term charcoal production in small private charcoal kilns (CK) in Eastern Bieszczady Mts. (SE Poland) can cause local smoke contamination of the ambient forest environment. Responses of model soil systems, contaminated or not contaminated by CK smoke, to contrasting combinations of hydrothermic regimes were compared in laboratory microcosms (respiration of soil community, decomposition rate of soil organic matter and cotton stripes, herb seeds germination were studied). The majority of the obtained data show a markedly higher level of soil biological activity in the CK versus the control series. In some cases CK and control soil systems show different patterns of reactions to the tested combinations of microclimate regime. These phenomena should at least partly be attributed to the effects of CK pollution.     

Preparation and Characterization of Cellulose/Polypropylene Composite Using an Oxidatively Degraded Polypropylene

In this work, an oxidatively degraded polypropylene (DgPP) was studied as a novel coupling agent for fibrous cellulose (FC)/polypropylene (PP) composite. An optimal preparation time of PP thermal oxidative degradation was 18 h at 130 °C, and the DgPP had functional groups such as γ-lactone and acid groups. The spherulite observation of the DgPP suggested miscibility for the undegraded PP. The addition of the DgPP presented the transparency improvement of FC/PP composite, and this behavior was found to be originated from the grafted DgPP, which was produced by the esterification reaction between the of FC and the DgPP. The scanning electron microscope (SEM) observation showed that the grafted DgPP coated the FC surface, and the tensile strength of the FC/PP composite increased by an appropriate amount of the DgPP addition. These results suggested that the DgPP was suitable for the coupling agent of FC/PP composite.